Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Vintage Air trinary switch kits combine low- and high-pressure compressor clutch cut-off functions plus an electric fan engagement signal at 254 psi. The low pressure cut-off of these trinary switches is 30 psi and the high pressure cut-off is 406 psi. Vintage Air trinary switches are available for barb or beadlock crimps and are recommended for all electric fan installations. Get three functions in one with Vintage Air trinary switch kits.
( 21 )
$64.99
—
$76.99
Combine high and low-pressure functions into one switch with binary switches from Vintage Air. These aluminum switches are available for barb or beadlock crimps with pressure cutoffs of 30 psi and 406 psi. Get both functions in one with these binary switches.
( 4 )
$43.99
Faulty brake lights can cause accidents to happen. Classic Performance replacement brake light switches allow for a faster signal to be sent to your taillights and more time for the car behind you to react. An old, low-pressure brake light switch prevents your lights from doing their job. These devices turn your brake lights on at 45 psi. Classic Performance kits include hydraulic switches and fitting kits for an easy installation. They're available in a variety of styles; select the model best suited for your application.
( 32 )
$19.99
Vintage Air has just what you need to complete your cooling system installation, including a selection of inline safety switch ports. These connection fittings are available in #6, #8, and #10 sizes to accommodate a variety of A/C hose end styles. Choose from aluminum construction with a natural finish, or steel units with a nickel plate finish. When you're ready to replace an inline safety switch port, or need one to finish off a climate control system, you can rely on the experts at Vintage Air for the parts required to stay cool.
Not Yet Reviewed
$14.99
—
$74.99
On certain GM and Ford applications, a low oil warning sensor screws into a fitting in the OEM oil pan. If you have one of these models and choose not to use the sensor, Moroso offers these low oil pressure switch plugs. These plugs come with a copper washer .
( 3 )
$22.99
Maybe you need to replace some fittings or you need a special fitting to complete your climate control system. Vintage Air has the miscellaneous fittings that you're probably looking for, like these pressure switch fittings. These fittings are made of nickel plated steel and come with female switch installation fittings for binary and trinary switches. Get the fittings that you need to help you keep your cool from Vintage Air
( 4 )
$18.99
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 12 )
$25.99
—
$125.99
These Summit Racing™ low oil pressure switch plugs are necessary when using one of our Summit Racing™ 5.0L Ford oil pans. Whether your 5.0L never came with the low oil pressure switch or you're not running the switch, this plug is sure to properly seal your oil pan.
( 4 )
$19.99
Safety switches are recommended in all air conditioning systems. To install female threaded trinary or binary safety switches into Vintage Air standard or chrome driers, you'll need threaded adapters. These adapters are specially made for this purpose. Vintage Air has more than air systems; they deliver all that you need, including fittings and threaded adapters, so you can drive cool.
( 18 )
$10.99
—
$62.99
Russell brake adapter fittings are manufactured from quality steel for strength and durability. They are available in several styles to suit all of your brake system needs.
( 165 )
$16.95
Four Seasons air conditioning suction hoses are your answer for fixing it once and fixing it right. Suction hoses manufactured by Four Seasons are constructed with double-wall barrier hose, gaskets, O-rings, seals, and feature a crimped fitting connection. These hoses meet or exceed the OE-design fitment, form, and function of manufactures' hoses. Four Season air conditioning suction hoses are the choice of automotive enthusiasts wanting a great quality product made to provide long-lasting durability.
( 18 )
$24.99
—
$110.99
Hose assemblies play an important role in A/C system performance by carrying refrigerant and lubrication from one component to another. Poor manufacturing can lead to restricted refrigerant and oil flow to the compressor, resulting in catastrophic system failure. Four Seasons air conditioning discharge hoses are designed to minimize refrigerant loss. Their fittings are permanent beadlock types with lightweight, rust-free aluminum construction. These hoses are made to OEM specifications for a correct fit and each one is 100 percent inspected to ensure bend pipe consistency is maintained through a highly precise CNC-bending machine. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Four Seasons. Features include: * Contains gaskets, O-rings, seals, and charge port fittings to properly replace the hose * Constructed with double-wall barrier hose compatible with R134A or R12 * Hose wall thickness and burst pressure exceeds OE requirements * Application specific design * Tubing meets OE wall thickness and fitting specs * Pad block fittings match OE * Orifice tube meets OE in fit, form, design, and function * Welds and connections are the same as OE with no refrigerant flow restrictions • Ferrule crimp exceeds OE tensile test requirements * All fixed brackets are included on hose assembly
( 53 )
$17.99
—
$105.99
Vintage Air offers SureFit reduced barrier standard hose kits that are designed specifically for use with a complete Gen IV or Gen 5 SureFit system and the stock engine compartment configuration and core support for your vehicle. These reduced barrier standard hose kits contain refrigerant hoses with pre-crimped reduced barrier beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.
Not Yet Reviewed
$194.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 123 )
$15.50
—
$222.99
Vintage Air E-Z clip kits are offered in many options, so you can customize your system, your way. Each kit includes fitting, fitting cage(s), and hose fitting E-Z clips. You can select from straight fittings with or without service port, splice fittings with switch port, and T-fittings, as well as 45 and 90-degree fittings with or without service ports in different hose end sizes. Select the Vintage Air E-Z clip kit needed for your custom plumbing job.
Not Yet Reviewed
$24.99
—
$144.99
SSBC-USA rear brake light pressure adapter fittings allow connection to switch and brake line. These FTG fittings are made from quality materials to ensure the best fit and lasting performance. They are universal, but were actually original equipment on many early Mustang models. Reinstall the pressure switch for your brake lights with an assist from SSBC-USA.
Not Yet Reviewed
$23.00
On Sale
Earl's Performance brake system adapters are offered in many configurations to connect your brakes properly—and with confidence. Their wide selection includes brake, banjo, and banjo bolt adapters, tube and tee adapters, as well as male-to-male reducers. Many of the adapters will connect Earl's Hyperfirm, racing, and off-road hoses to stock or upgraded brake wheel cylinders and calipers. They are available in electroless nickel plate steel, brass, and corrosion-resistant stainless steel. Got a brake job to do? Stop! Check out the wide selection of Earl's brake system adapters to get the job done right.
( 188 )
$26.61
Did you forget the hose end fittings for your A/C install? Vintage Air didn't! Vintage Air beadlock O-ring air conditioning hose ends are available in #6, #8, and #10 sizes, multiple angles, as well as with or without 134a service ports to meet your application's needs. Vintage Air does more than make air conditioning systems--they offer everything that you need for a complete install, right down to the hose ends.
( 133 )
$18.99
Russell shut-off valves allow you to easily control the flow of fluid with just a simple quick flip of a switch! These shut-off valves have large handles that make them easy to use, and they're also clearly marked for proper flow direction. They feature an aluminum construction with an anodized black finish, and are available in a variety of AN sizes to best suit your application requirements.
( 25 )
$25.95
—
$32.95
These Wilwood brake shut-off valves are designed to block pressure from reaching the brake system. They will not prevent fluid from returning to the master cylinder, eliminating the possibility of trapping pressure when activated. The valves require a 12 V, 5 amp fused power source activated through a toggle switch for operation.
( 3 )
$197.57
Russell fuel pressure take-off fittings are precision machined from lightweight aluminum, ensuring precise thread engagement and a positive seal at maximum operating pressures. They feature an 1/8 in. female NPT side port for gauge or pressure switch connection and are offered with a red/blue or black anodized finish to complement your engine bay.
( 65 )
$10.95
—
$14.95
Vibrant Performance shut-off valves allow you to easily control the flow of fluid with just a simple flip of a switch! They feature large handles that make them easy to use, and they're also clearly marked for proper flow direction. They're manufactured from 6061 aluminum and then given a black anodized finish for added durability. Vibrant Performance shut-off valves are available in a variety of AN sizes to best suit your application requirements.
( 3 )
$39.50
—
$73.99
Are you installing a hydraulic brake light switch on your project vehicle? If so, then these Ron Francis Wiring brake line tees are just what you need to complete your installation. Available in several sizes, depending on your needs, these Ron Francis Wiring brake line tees are sure to provide dependable and leak-free performance.
( 7 )
$23.47
Davies Craig temperature sensor adapter kits contain economical parts that allow for easy fitment directly to your radiator hose. They eliminate the need to squeeze the probe of the mechanical thermal switch or EWP controller between your radiator inlet and hose. The universal kits come with everything you need for a watertight and effective installation.
( 10 )
$34.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
