Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
These Summit Racing™ dual feed fuel lines are a great addition to any fuel system. The pre-assembled fuel lines clean up your engine compartment and properly deliver fuel to your carburetor. Available in multiple sizes and styles to suit your needs.
( 448 )
$49.99
—
$74.99
Summit Racing™ fuel lines are a great addition to any fuel system. They include all necessary hardware for an easy installation on your Edelbrock, Holley, Carter, or Summit carburetor. Available in multiple styles to suit your needs.
( 261 )
$20.99
—
$54.99
Summit Racing™ premium braided nylon hose will handle today's fuels and pressures--plus keep you on budget! Our race hose is certified for use with E-85, as well as additives currently found in diesel, ethanol, and alcohol based-fuels. And, these 30R9 tested and approved hose features burst pressure to 500 psi with minimal permeation. The hose is built with 4-ply lightweight--lighter than stainless braided hose--construction with an FKM fluoroelastomer lining and is reinforced with a braid of stainless steel. The design and materials work to eliminate fuel permeation under extreme and extended conditions that lead to sour gas odors and dry, cracked hose. Summit Racing™ premium braided nylon hose offers superior compatibility with fuels, as well as strength and value for you and your race car.
( 52 )
$24.99
—
$190.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$7.99
—
$222.99
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$6.75
—
$159.95
Redhorse Performance 1000 Series swivel seal hose ends are meticulously engineered. RHP starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers—providing superior thread strength and smooth assembly. Available in different AN fitting sizes and finishes, select the 1000 Series swivel seal hose ends designed for your application needs. Additional product features: * Available in straight, 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (sold separately) * Custom designed hose nipples enable a quick, easy, and consistent hose end assembly and our double swivel seal design makes for easy re-clocking * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * Color consistent anodizing and unique pressure testing adds the final touch of quality and protection that professional engine builders have come to expect from Redhorse Performance AN hose ends * Can be easily assembled with the help of RHP's custom made tools (sold separately)
( 10 )
$8.07
—
$71.74
Sitting in the sweet spot of performance, looks and ease of installation, the Redhorse 2000 Series push-lock hose ends are the perfect choice for many builds. Each component is cut from 6061 T6 aluminum alloy on CNC machine turning centers providing superior thread strength and leak-proof performance. Offered in different sizes and finishes, order the 2000 Series push-lock hose ends designed for your plumbing application. Additional product features: * Available in straight, 45 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * 2000 Series push-lock fittings must be paired with RHP's 401 Series or 402 Series push-lock hoses (hoses sold separately) * Custom designed hose nipples allow quick and easy assembly * Unique aluminum collars cover the cut end of the hose (sold separately) for smooth snag-free performance * Exclusive hand polishing, color consistent anodizing and unique pressure testing provide the final touch of quality and protection * RHP hose ends can be easily assembled with the help of RHP's custom made tools (sold separately)
( 6 )
$7.56
—
$43.63
Earl's Performance introduces Vapor Guard OEM quick-connect fuel rail adapter fittings. These fuel line fittings offer an easy way to re-use existing OE fuel rails, fuel filters, and other components when doing an engine swap—or upgrading to Vapor Guard (or other AN plumbing). Each fitting has a -6 AN male flare and a metal retainer nut for a secure leak-free connection to the 5/16 or 3/8 in. SAE-style fuel tube. The adapters are machined from 6061 T6 aluminum with a black anodized finish. Order the size needed for your application. Additional product features and benefits: * Allows easy transition from AN plumbing to OEM late model fuel rails, fuel filters, and other fuel system components * Metal retainer nut is more secure than plastic clip * Choose from adapters that fit OE 5/16 or 3/8 in. tube on fuel rails (and other components) * Economically priced * Ideal for use with Earl's Vapor Guard hose and hose ends * Slim design for extra clearance
( 21 )
$27.30
—
$33.10
Earl's Performance transmission cooler line adapters make your plumb job easier. Integrating into the transmission and adapting to AN lines allows additional tunnel clearance and freedom that the original hard lines cannot. These adapters are available for many plumbing situations and custom applications. They're machined from high-quality materials, including nickel plated steel or billet aluminum with a black anodized finish, and have high-pressure capabilities. Order the adapter size and configuration needed for your application.
( 33 )
$19.60
—
$70.79
Russell Powerflex Endura power steering hose ends are for use with Powerflex power steering hoses. They're manufactured from high-quality alloy steel providing the additional strength required to guarantee a quality, high-pressure hose assembly.
( 50 )
$15.95
—
$529.95
Redhorse Performance 1200 Series reusable PTFE hose ends are meticulously engineered. RHP starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers to provide superior thread strength and smooth assembly. Order the AN fitting size that meets your application needs. Additional product features: * Available in straight reusable PTFE; and PTFE 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, 180 degree angle * 1200 Series reusable swivel seal PTFE fittings are engineered for the exclusive with RHP PTFE hoses (sold separately). * In order to re-use the hose end you will need to purchase a package of our replacement ferrules (sold separately) * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * RHP's famous hand polishing and color consistent anodizing add the final touch of quality that professional engine builders have come to expect from Redhorse * Hose ends can be easily assembled with the help of RHP's custom made tools (sold separately) * Not to be used with standard braided racing hoses or push lock hoses
( 11 )
$13.46
—
$32.99
Summit Racing™ Premium reinforced rubber hoses offer the perfect choice for all your performance fuel, oil, and water fluid transfer needs. Today, the paraffins and additives found in commercial- and performance-bought fuels and oils have become too much for old school conventional rubber hose, causing premature deterioration. Our Summit™ Premium reinforced rubber hoses consist of a multi-layer wall, preventing fuel infiltration from within the hose or evaporating into the atmosphere, as well as offering high resistance to heat and providing superior fluid flow to effectively eliminate premature failure. Available in several diameters and lengths, these synthetic twined reinforced hoses will stand up to the most corrosive additives found in the market today. They are SAE J30R9 rated and safe to use with alcohol, methanol, E85, E97, water, coolant, and oil. Select the size(s) needed for your project.
( 4 )
$18.99
—
$99.99
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
—
$1,399.95
Russell Transmission fittings are designed to replace OEM adapters in TH350, TH400, 700R4, 4L80 and additional applications that utilize 1/4" NPSM threads. This will allow you to connect your braided line to your transmission case without cracking your transmission case . Available in -6 AN and -8 AN fittings.
( 56 )
$12.95
—
$16.95
If you live in a cold climate, efficient heat transfer is important for the cost-effective operation of your vehicle. Dayco has the solution with their Insulone heater hoses. These premium hoses deliver heated coolant to your heater core with a minimal loss of heat. Constructed from a synthetic EPDM rubber compound, they are spiral-reinforced and feature an insulating layer with a special compound for excellent burst strength and heat resistance. Dayco Insulone heater hoses are compatible with all common coolants and coolant additives.
( 5 )
$52.99
—
$306.99
These Y-fittings from Summit Racing™ offer a smoother flow path and less weight than comparable Y-blocks and fittings. They're machined from 6061-T6 billet aluminum and are anodized for protection from alcohol and other exotic fuel additives. Other features include a leakproof, one-piece design and AN fitting sizes on all sides.
( 27 )
$21.99
—
$33.99
Do you want to save yourself a hassle and time when installing a new fuel line? Fine Lines QuickFix fuel line kits can save you 3 to 4 hours of installation! Fine Lines kits come with pre-cut fuel lines and all the necessary installation hardware, making the replacement of a leaky fuel line easier than ever. The flexible fuel hoses are secured at all the factory clamp locations, and since these kits work with the factory specifications of your vehicle, you don't need to do any additional modification. These kits will easily connect to your fuel tank and run up all the way to your fuel rail. Fine Lines QuickFix fuel line kits are available in stainless and braided stainless steel, ensuring quality and leak-free performance. Choose the kit designed for your vehicle.
( 8 )
$72.57
—
$217.31
Upgrade your cooling system with Cold Case silicone hose kits that add style and performance to your ride. All Cold Case radiator hose kits come with super smooth and heat-resistant 5mm thick hose walls. While most competitors' versions are made from inferior 3-ply material, Cold Case uses only 4-ply material for superior performance. Additional features of Cold Case silicone hose kits include: * Designed specifically for particular makes and models * Made of high-quality silicone for enhanced strength and durability * Direct-fit replacements for stock rubber hoses * Available in a choice of colors
( 5 )
$76.54
—
$185.54
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$127.95
$70.85
—
$119.95
Tanks Inc. offers Russell Twist-Lok fuel hose for those demanding quality. The hose is flexible, lightweight, and ideal for most of your automotive applications. Compatible with hydrocarbon and alcohol-based fuel, lubricants, and additives, the hose works with all-AN adapter fittings. Mate them to reusable Twist-Lok hose ends pressure-rated up to 250 psi, which is suitable for most fuel and oil systems. Save yourself some assembly time and money with quality Twist-Lok hose delivered through Tanks.
( 4 )
$17.99
—
$87.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$2.99
—
$308.99
On Sale
OEM sensors are restrictive for fuel systems that flow greater than 400 lph. Aeromotive FlexFuel sensor adapters allow for the use of an ethanol sensor (FlexFuel Sensor) and a higher flow rate, as they create an alternative route for the fuel--while using the sensor to determine the percentage of ethanol in the fuel. The adapter bodies are constructed of 6061 T-6 aluminum alloy and bright dip anodized. Additional features: * Dual O-ring sealing on tubing of the FlexFuel sensor * ORB -10 inlet/outlet ports that can be adapted to any fuel line size
Not Yet Reviewed
$141.10
$126.99
PowerFlex Endura brake hose ends are made for use with PowerFlex brake line hose. They're manufactured from high-quality alloy steel. This provides the additional strength required to guarantee a quality high-pressure hose assembly.
( 6 )
$12.95
—
$25.99
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$127.95
—
$178.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
