Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
7 Results Found For "low"
Showing In Stock Items. Show All 8 Items.
Tanks Inc. Fuel Line Check Valves
Tanks Inc. fuel line check valves are designed to allow flow in one direction and prevent backflow. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Tank Inc. check valves are offered in a choice of sizes to meet your needs.
( 3 )
$37.99
Improved Racing High-Flow Flapper Check Valves
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
Russell Check Valves
Russell check valves are designed to allow flow in one direction and prevent flow back. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. A positive O-ring seal is incorporated into the high-flow check piston. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Russell check valves are offered in a choice of sizes to meet your needs.
( 11 )
$33.95
—
$64.95
Summit Racing™ One-Way Check Valves
Summit Racing™ one-way check valves are designed to prevent the back flow of any fuel, coolant, or oils. Their flapper design provides minimal flow restriction, and the high-quality construction of these valves ensures long-lasting performance. Their PTFE flapper requires a low 2 psi to lift off of the seat and is resistant to alcohol, methanol, and bio-diesel fuels. These check valves are offered in a choice of sizes to suit your needs.
( 31 )
$45.99
—
$59.99
Pacific Performance Engineering Race Fuel Valves
Pacific Performance Engineering race fuel valves are made from stainless steel and replace stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. The PPE valves eliminate potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 1 )
$41.39
Vibrant Performance Pressure Relief Valves
Vibrant Performance pressure relief valves improve the serviceability of automotive fuel, oil, and coolant systems, by reducing fluid spillage when hoses are removed. When installed at the highest point in a coolant system or component, the pressure relief valve can be used as a bleeder to purge any unwanted air from the system/component. These components are constructed from 304 stainless steel and are black zinc plated. They are compatible with automotive fuel, oil and coolant systems and have been tested for low and high pressure sealing abilities up to 100 psi. The 1/8 in. NPT body design installs with a 7/16 in. wrench (thread tape recommended).
Not Yet Reviewed
$42.99
Motorcraft Air Conditioning Vacuum Control Valves
Motorcraft air conditioning vacuum control valves deliver the OE fit and function you need for your Ford, Lincoln, or Mercury. After all, they were engineered by the same people who engineered the vehicle. To ensure quality and reliability of your repair/replacements, choose Motorcraft parts for your vehicle.
( 1 )
$10.99
