Availability
Showing In Stock Items. Show All 337 Items.
This SAE 30R7 rated Summit Racing™ braided nylon hose is designed for use with gas, oil, diesel, and other fluid applications. It uses a higher grade nitrile inner core that is specifically compounded to hold a higher fuel resistance than any other nylon hose product on the market. It can handle heat levels up to 275 degrees F and a maximum working pressure of 350 psi. Summit Racing™ braided nylon hose is lightweight and flexible. These features, combined with its ease of assembly, make it the fastest growing choice of hose products for racing and performance enthusiasts.
( 188 )
$16.99
—
$194.99
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 39 )
$24.29
—
$1,434.99
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 83 )
$12.79
—
$999.99
Fragola Performance Systems 6000 Series PTFE-lined stainless hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Each hose is 100 percent inspected and any flawed sections are discarded. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, they will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined stainless hoses are available in assorted sizes, lengths, and hose end configurations to perfectly fit your application. Hose sizes 6-12 AN have a conductive core to dissipate static electricity. Some hose sizes are available with a clear cover, black cover or no cover depending on your preferences and how much protection you want your hose to have.
( 117 )
$4.99
—
$263.99
Summit Racing™ premium braided nylon hose will handle today's fuels and pressures--plus keep you on budget! Our race hose is certified for use with E-85, as well as additives currently found in diesel, ethanol, and alcohol based-fuels. And, these 30R9 tested and approved hose features burst pressure to 500 psi with minimal permeation. The hose is built with 4-ply lightweight--lighter than stainless braided hose--construction with an FKM fluoroelastomer lining and is reinforced with a braid of stainless steel. The design and materials work to eliminate fuel permeation under extreme and extended conditions that lead to sour gas odors and dry, cracked hose. Summit Racing™ premium braided nylon hose offers superior compatibility with fuels, as well as strength and value for you and your race car.
( 52 )
$24.99
—
$190.99
Summit Racing™ stainless steel braided brake line assemblies are constructed from high-quality stainless steel braided hose and feature hose ends that are zinc plated for protection. They also feature pre-assembled ends that are factory-crimped to eliminate leakage. They come available in different lengths and end configurations, so we are sure to have you covered with one of these Summit Racing™ stainless steel braided brake line assemblies.
( 39 )
$11.99
—
$26.99
Redhorse Performance 235 Series black nylon braided hose will keep pace with your racing whether you are using e85, methanol, or regular fuel from the pump. This top-of-the-line nylon braided hose with single stainless steel under-braid features a unique dual layer inner tube, with a layer of Epichlorohydrin (ECO) and a layer of Fluoroelastomer (FKM) for unrivaled fuel compatibility. With a light weight, great looking outer braid, and stainless steel under-braid, along with an advanced inner-tube, the 235 Series hose by RHP offers a sleek clean look without sacrificing performance. Select the hose diameter and length for your application. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends * NHRA accepted Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications.
( 1 )
$8.81
—
$880.37
Redhorse Performance 230 Series black nylon braided hose is constructed with a unique half layer of high-quality braided stainless wire hidden beneath. The 230 Series uses a fuel resistant seamless NBR synthetic tube liner and combine that with RHP's industry exclusive bonding process and you have the highest quality nylon braided hose available. With a stainless core you can be assured that this hose gives you the best of both worlds—an aesthetically pleasing hose with protection of stainless, all while providing a pressure rating unsurpassed by the competition. Select the hose diameter and length that you need. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends * NHRA accepted Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications.
( 2 )
$6.31
—
$725.00
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 30 )
$21.95
—
$61.95
Aeroquip's AQP braided stainless steel racing hose uses a patented elastomer tube to resist oxidation, and a partial inner and full outer stainless steel braid for strength. It is compatible with most fuels, coolants, and oils. With a temperature range of -55 to 300 degrees F, and a maximum pressure rating of up to 1,000 psi, it can handle nearly any plumbing job safely and securely.
( 73 )
$28.99
—
$395.99
Fragola Performance Systems 6000 Series PTFE-lined braided stainless pre-made hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Since stainless steel braided hoses can be abrasive to almost anything they come into contact with, Fragola offers their 6000 Series PTFE-lined stainless hoses with clear or black covers to prevent scratches, scrapes, and scuffs. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, it will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined hose are available in assorted sizes, lengths, and hose end configurations. Each hose is 100 percent inspected and any flawed sections are discarded. Plus, hose sizes 6-12 AN have a conductive core to dissipate static electricity.
( 140 )
$15.99
—
$107.99
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 8 )
$50.90
—
$485.40
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 131 )
$66.08
—
$205.79
Allstar Performance coated stainless steel lines are much more durable than conventional rubber hoses. They bend and flex easily without bursting. The lines feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. They are then covered with a special PVC coated material for maximum durability against debris and abrasion. Allstar Performance coated stainless steel lines are available in several AN sizes and lengths with either zinc oxide steel or anodized aluminum hose ends in several configurations to meet your needs. Select the size and style needed for your plumbing project.
( 43 )
$12.99
—
$105.99
Toss those rubber hoses away in favor of Allstar Performance braided steel lines. Much more durable than conventional rubber hoses, they easily bend and flex without bursting. The PTFE-coated inner lining is compatible with all fluids; it's wrapped in a braided stainless steel cover to resist abrasion and corrosion. Allstar lines are available in nearly 150 models, with a variety of AN sizes, hose ends, and lengths to meet your needs. Select the braided steel lines designed to fit your application needs.
( 110 )
$11.49
—
$73.99
Looking for an easy way to spruce up your engine compartment? Summit Racing™ braided hose sleeving kits are just the ticket. You get 3 ft. of vacuum line sleeving, 4 ft. of fuel line sleeving, 4.5 ft. of radiator hose sleeving, and 12 ft. of heater hose sleeving with matching machined-aluminum clamp covers. The sleeving cuts easily with scissors.
( 11 )
$73.99
—
$79.99
AED makes custom-braided fuel lines for your Holley dual feed carburetor. These fuel line kits are made from the finest quality braided stainless steel with AN aircraft aluminum fittings that are anodized red and blue for durable, long-lasting good looks. AED braided fuel line kits come fully assembled with bowl fittings and a gauge port, plus these fuel line kits are available with or without mounted AED gauges. The AED advantage for you is made-to-order quality carburetor components at a price that you can afford.
( 25 )
$79.99
—
$99.99
Nitrous Outlet stainless steel braided hoses are factory-assembled for the safest and best connections possible. They come with anodized aluminum ends in several colors—and provide for the secure plumbing of your nitrous and fuel line needs. The hoses are available in different lengths, widths, and end fitting sizes to match your fuel or nitrous system plumbing needs.
( 29 )
$16.99
—
$275.99
March power steering hose kits allow you to plumb your system with great style and superb performance! These braided stainless steel hoses feature PTFE inner liners and include fittings. They are available for Saginaw/canister and GM type 2-style pumps. Make the area under your hood shine with performance from March power steering hose kits.
( 13 )
$159.99
—
$284.99
Mr. Gasket's universal stainless steel braided fuel lines feature high-quality construction. These fuel lines can be cut to length and include hose clamps. Mr. Gasket universal stainless steel braided fuel lines are NOT for use in fuel injected applications.
( 6 )
$39.91
ARB high-flow stainless steel braided PTFE hoses are designed to deliver air from your ARB compressor (sold separately) throughout your vehicle. These long reinforced braided PTFE hoses feature JIC-04 37 degree flare fittings on each end. The fittings are zinc nickel alloy electroplated steel for corrosion resistance and strength to provide an easy, secure connection. Available in different hose diameters, order the ARB high-flow stainless steel braided PTFE hose that is best suited to fit your application requirements.
( 5 )
$24.95
—
$64.95
Stock rubber brake hoses are prone to drying, cracking, high-pressure expansion, and damage from road debris. Eliminate those common problems with Steeda stainless steel braided brake hoses. They offer greater durability—as well as improved brake pedal feel and response. The replacement kits are available for fitment on well over a hundred Ford applications from 2013 and up.
( 2 )
$209.95
—
$249.95
On Sale
Mr. Gasket black nylon braided AN hose features a special fluoroelastomer inner liner and are lighter weight than traditional stainless braided hoses. The hose is designed for use with Mr. Gasket swivel, Earl's swivel-seal, or Earl's auto-fit hose ends. Order the hose application suited to fit your needs.
( 1 )
$164.95
$29.01
—
$194.95
Resurrected Classics is a one-stop destination for the Datsun parts you need to revive, repair, and restored your beloved vehicle back to its former glory. With a commitment to excellence, you can trust their genuine Datsun body parts to ensure a perfect fit and provide authentic restoration. Resurrected Classics 240Z OEM-style braided coolant hose sets are available with or without radiator hoses and will include all the coolant hoses that run throughout the engine bay. The hoses are carefully molded with the exact curves and bends, creating accurate replicas of the factory braided-style hoses to fit and perform just like the originals. Select the coolant hose set preferred for your Datsun. Hoses included in both sets: * Heater hoses * Reducer hose * Small hose to the intake * Curved hose from the intake to the thermostat housing
Not Yet Reviewed
$159.99
—
$379.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
