Availability
Showing In Stock Items. Show All 26 Items.
On Sale
JET fuel filter ORB fittings contribute to a leak-free plumb job. Engineered to attach your fuel line to their Powr-Flo inline 10 and 100 micron fuel filters, these aluminum fittings feature a durable black anodized finish with O-ring. Whether you've chosen an AN -10 or -8 fuel line for your Powr-Flo project, JET offers the correct ORB fittings to complete the job.
( 2 )
$16.46
$14.81
On Sale
JET Performance offers AN to straight cut O-ring fittings to allow you to plumb an AN line to a fitting that uses an O-ring seal. These fittings are manufactured from high-quality aluminum and are black anodized for protection against corrosion. Plumb with precision with AN to straight O-ring fittings by JET Performance.
Not Yet Reviewed
$16.46
$14.81
MagnaFuel jet adapter fittings are recommended for use with your MagnaFuel air bleed systems. These high-quality fittings are made from billet aluminum and are designed for AN and NPT fittings.
Not Yet Reviewed
$31.79
DeatschWerks offers a wide range of fuel pump components, including Venturi siphon jet kits. These T-6061 aluminum fittings are anodized in a variety of colors. The fittings feature a 5/16 in. hose barb on one end and -6 AN ORB threads on the other. Plumb your fuel system with the right parts from DeatschWerks.
Not Yet Reviewed
$99.00
Motion Pro replacement resistor jets are available for their SyncPro carb synchronize tuner. Ok, so do you remember when trying to synchro your carb's with vacuum gauges and the needles used to shake really bad? With Motion Pro's resistor jets, these little jewels will stabilize the vacuum 'pull', eliminating the shake, surge, and flutter you'd get. Put the resistor jets in the hookup line to the carb's—and voila! You'll get calm vacuum 'pull', allowing you to accurately adjust all the carburetors to each other. You may want to keep a spare set on hand, because your buddies are sure to want a set too!
Not Yet Reviewed
$9.89
These fittings are used to plumb nitrous and fuel jets into NOS' plate systems. They are ideal for replacing damaged fittings, or for plumbing a custom plate system.
( 1 )
$9.74
—
$23.78
Nitrous Express plate jet fittings will assist in plumbing nitrous and fuel jets into your NX plate system. The straight adapters are manufactured from aluminum and available in various sizes. For your nitrous needs, choose Nitrous Express to build and service your nitrous oxide systems successfully.
( 3 )
$9.55
Do you remember why the S-Jets were so sought-after way back when? According to the patent, the S-jets were able to cope with higher inlet pressures, eject dirt particles, improve high-speed running, and didn't stick or dribble. And unlike many so-called Viton®-tipped needles, they won't melt in today's corrosive new gas formulas. Well, Stromberg decided to go back to the original patents to get these famous old twin-ball inlet valves right, because they're one trick piece that every Stromberg should own!
( 8 )
$19.75
—
$24.95
Nitrous Outlet offers a variety of AN fittings and adapters for your plumbing applications. The fittings are machined from high-strength aluminum, anodized to prevent corrosion—and are available in popular sizes and configurations for most nitrous oxide connections.
( 3 )
$4.99
Nitrous Outlet AN to NPT adapter fittings are available in anodized aluminum and zinc plated steel finishes. They are precision-machined to exacting tolerances for trouble-free performance, and they allow you to connect AN and NPT fittings together quickly and easily.
( 9 )
$4.99
—
$5.99
Edelbrock's adapter fittings are offered in a variety of applications and materials. From lightweight aluminum to brass and stainless steel, these fittings allow you to easily connect Russell nitrous hose ends to almost any component. Simply choose the AN size that matches your hose and the NPT thread size that matches the component that you're plumbing. Edelbrock also offers filter fittings to prevent debris from clogging the nitrous and fuel jets that are designed to be used inline with your nitrous system in place of standard fittings. Make your custom nitrous plumbing easier with Edelbrock adapter fittings.
( 6 )
$12.95
—
$19.95
Nitrous Outlet offers a variety of fittings and adapters for use in nitrous oxide (NOS) systems to connect various parts, such as hoses, solenoids, and jets—allowing for the controlled delivery of nitrous to an engine. These specialized fittings typically include AN and NPT (National Pipe Taper) threads, with AN sizes referring to the hose or tubing diameter and NPT being a standard thread size for plumbing connections. Nitrout Outlet NPT fittings are machined from aluminum, and are available in multiple sizes and angles (45 and 90 degree).
Not Yet Reviewed
$3.99
—
$95.99
Stromberg Superseat brass hose fittings boast many small, but important design features aimed to ensure superior style and high performance for your vehicle. After all, you wouldn't settle for anything less! These 5/16 in. hose fittings have the correct 18 degree seat. Their hex part is kept short for good looks, and so is their thread length. They work well with other aftermarket inlet fittings, as well as with the genuine Stromberg S-jets.
( 1 )
$9.50
—
$15.95
Stromberg Ford nut compression fittings are available in a handy pack of three, complete with the brass ferrules. They fit the new Stromberg S-jet and the original needle and seat. Installation is easy and there is no need to flare the hard line end. Just slip the Ford nut over the end, add the ferrule, and then push the pipe firmly into the 97 inlet fitting and tighten the nut, while compressing the ferrule to form a good fuel-tight joint. Ford nuts also fit most Ford flathead fuel pumps, except the 1951-53 1BA glass bowl pump, which uses 1/8 in. NPT fittings.
( 3 )
$7.95
Scott Drake offers transmission oil cooler fittings for a variety of vehicle and engine applications. These replacements are machined from brass and screw into the radiator oil cooler, connecting it to the transmission oil cooler lines. Scott Drake redefines quality reproduction and aftermarket parts for early to late model Mustangs. Check your application for proper fitment.
( 5 )
$13.01
Walker weld-in oxygen sensor fittings work with most OEM and aftermarket sensors. They are ideal for custom or do-it-yourself fabricators building headers for computer-controlled cars or trucks using an oxygen sensor.
( 1 )
$13.99
Transmission oil cooler fittings are used in the transmission cooler circuit to connect components and lines. All products from Four Seasons are engineered and tested to provide years of trouble free operation. Backed by over 50 years of car parts experience, fix it once and fix it right with Four Seasons.
( 4 )
$4.99
Universal Air Conditioner is a leading supplier of top-quality air conditioning system replacement components for automotive, truck and off-road heavy duty applications. All UAC products are made of high-quality materials to ensure reliable performance and long service life. From compressors to evaporators, thermostatic switches to hose, valve caps, and more, whatever your air conditioning parts and component needs, UAC has got you covered.
( 3 )
$5.99
Dorman pipe plugs include a huge assortment of styles, sizes, and materials to fit most any project. They offer many different pipe plugs that match the original equipment plug for diameter, thread pitch, and head type to ensure a reliable repair. Dorman also offers engine oil drain plugs and cylinder head plugs designed to match the fit and function of the original part on specified vehicles. All plugs are engineered for reliable performance and a long service life.
( 15 )
$4.99
—
$9.99
Sierra Marine fuel tank connectors are available in multiple shapes and sizes for watercraft fuel applications. They help complete your fuel line assembly and keep it leak-free. Order the Sierra Marine fuel and tank connectors designed to fit your application.
Not Yet Reviewed
$13.99
Fragola Performance Systems offers a variety of turbocharger components—including these turbo oil restrictor fittings. The aluminum adapters are available in numerous AN and NPT sizes. They enable you to set the correct oil flow to your turbo to minimize potential damage to the oil seals. Order the size needed for your application.
Not Yet Reviewed
$16.99
These fittings are ideal for plumbing your nitrous system or vehicle fuel system. They're made from nickel plated brass for good looks and durability.
( 6 )
$6.83
Plumb your nitrous oxide the easy way with NOS specialty Y-fittings. They enable you to run two lines into one—saving space and money at the same time. The aluminum fittings are available in numerous sizes and attachment options. Choose from a red, blue, or black anodized finish, all with the NOS logo printed on top.
Not Yet Reviewed
$53.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
