Availability
Showing In Stock Items. Show All 117 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$15.99
—
$18.99
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 17 )
$40.99
—
$72.99
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$82.45
$41.99
—
$76.45
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$19.99
ICT oil galley barbells have a "weighty" job to perform. Often overlooked, but very much needed, these oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. Little things may cause a big headache; for your build, replace the plastic barbell with a new one from ICT Billet.
( 1 )
$35.99
Where legally permissible when doing an LS or LT swap, ICT Billet fuel vapor purge solenoid plugs make life easier by blocking off the intake manifold EVAP port. They can be installed in seconds and come packaged and ready to go.
( 25 )
$22.99
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 22 )
$49.95
Earl's Performance clutch adapter fittings convert OEM master cylinders, clutch release bearings, and slave cylinders to accept a better replacement for your less-than-perfect OEM plastic hose. These quick-disconnect fittings work perfectly with Earl's Speed Flex hose (not included). They're made from 304 stainless steel or aluminum and include EPDM O-rings. The adapter fittings are offered in several early and late model vehicle styles, straight and 90 degree angle. Check your OEM hose for the proper fit.
( 27 )
$24.14
ICT Billet has made their name known by making the hard to find items that always slow down your LS swap, and this time it's no different. The ICT Billet camshaft position sensor delete plugs are the answer to your cam swap issues. Made from high-quality materials, and including the hardware needed these kits are designed with ease and reliability in mind.
( 2 )
$58.99
Allstar Performance oil galley plugs are used by the factory to divert oil to the factory oil filter and prevent unfiltered oil from circulating through the engine. The original GM barbells are a nylon material that may become brittle over time and should be replaced when performing a rebuild or upgrades. These replacement galley plugs are offered in multiple materials for a variety of year/make and engine applications.
( 4 )
$13.99
—
$26.39
ICT Billet coolant crossover delete kits are coolant/steam port block-off plate sets for LS-Series engines. Kits include two coolant ports, two O-rings, and two bolts. These kits do not have holes for crossover tube attachment. Made from aerospace-grade billet aluminum with a natural finish, they can be installed on the front or rear of the cylinder heads.
( 12 )
$29.99
ICT Billet remote mount water pump adapters are made from aerospace-grade billet aluminum. Plates, fittings, bolts, and gaskets are included. Remote-mount your water pump with the performance and style of ICT Billet adapter kits.
( 2 )
$85.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
—
$15.99
McLeod offers a variety of small parts, fittings, and connectors needed to finish your hydraulic conversion—including these clutch line clips. The quick-disconnect retaining clips are machined from steel and will provide a secure connection for your lines. They were original equipment on 2005-23 Ford Mustang 2.3L to 5.8L models.
( 2 )
$10.50
Dorman heater hose connector fittings are available for a wide range of cars, trucks, and vans--both application-specific and universal models. These parts can be used as replacements in areas such as the heater core inlet and/or outlet, and the radiator surge tank. The fittings are stocked in various sizes, materials, and shapes (straight, elbow); some are hose barb style, while others are quick-connect. Eliminate aggravating leaks in your cooling system with the help of these Dorman heater hose connector fittings.
( 56 )
$10.99
—
$23.99
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$11.99
Dorman offers a line of brake banjo bolts in a range of thread sizes and lengths for various applications. All of their brake hydraulic hose to caliper bolts are constructed from high-quality materials for long-lasting durability. They're conveniently packaged in a variety of piece counts to assist with both small and large projects. Order the Dorman brake banjo bolts designed to fit your application.
( 29 )
$4.99
—
$8.99
ICT Billet oil level sensor and sending unit plugs are available for a variety of engines. They can be used when deleting or relocating your oil pressure sending unit--or to delete the oil level sensor in your factory oil pan. These quality delete plugs are made of aluminum and include a crush washer or O-ring, depending on the application.
( 11 )
$13.99
—
$17.99
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 5 )
$20.00
GM Genuine Parts engine oil drain plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are true OE parts installed during the production of or validated by General Motors for GM vehicles. They're designed, engineered, and tested to rigorous standards, and are backed by General Motors. Plugs are available for thousands of applications; order the style recommended for your vehicle.
( 3 )
$6.99
ACDelco GM Genuine Parts engine galley plugs are manufactured to be an exact replacement for your GM vehicle. GM original equipment parts give you peace of mind that the fit, form and function is of the highest standards. Order your OE replacement parts from the same source as General Motors--ACDelco.
Not Yet Reviewed
$7.99
Dura-Bond provides quality replacement oil galley plugs for engine block rebuilds and repairs. These oil galley plugs divert the flow of oil in the engine block where needed. They are engineered to OE replacement tolerances.
Not Yet Reviewed
$3.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
