Availability
Showing In Stock Items. Show All 51 Items.
Aeroquip replacement brass sleeve fittings are quality fittings for your air conditioning hoses. They are available in several sizes to suit your automotive needs.
( 2 )
$52.99
RapidAir Products Maxline outlet blocks assist in setting up your compressed air system. These outlet assemblies can be strategically placed through your planned layout for convenient usage. They're available in different fitting sizes.
( 4 )
$70.99
—
$79.99
Save yourself time and money with brake line fitting assortment sets from Summit Racing™. Manufactured from quality material, the fittings are available in thread pitches and configurations to suit your specific brake setup. Each kit includes a convenient plastic storage case with separated compartments labeled with the proper sizing of each fitting for quick, easy identification.
Not Yet Reviewed
$90.99
These Allstar Performance brake shut-off valves allow you to easily control brake fluid flow. They feature a 1/8 in. NPT inlet and outlet and are rated at 2,000 psi for racing applications. The valves have an easy to use plastic handle at the top for quick shut-off.
( 11 )
$69.99
Flaming River offers a variety of power steering adapter fittings. They're made from materials such as brass zinc plated steel. Order the sizes needed to connect your power steering hoses.
( 22 )
$58.99
—
$68.99
Direct from Detroit, New Vintage USA LS temperature sender installation kits allow standard 1/8 in.-27 NPT threaded senders to be installed in the standard LS ports. The included M12 bushings are handmade from brass hex stock and enable you to use full-length temperature senders—there is no need for special "short" units. A pre-wired step-up resistor for tachometers reading a tach signal from the PCM is also included. Choose New Vintage USA LS install kits for accuracy, proper fitment, and American craftsmanship.
( 2 )
$65.99
Pete and Jake`s thru-frame fitting kits allow you to pass your brake lines through your frame. These kits include additional brass fittings to assist you with your brake line installation. Pete and Jake`s thru-frame fitting kits are ideal for use on frame widths up to 2 in.
( 3 )
$60.99
The Stop Shop offers brake fitting assortments in a variety of materials, such as aluminum, brass, and steel. They come in sets ranging from 16 to 45 pieces, and are furnished in sizes to fit specific brake line applications. The fittings include tube nuts in styles such as male inverted flare and male bubble flare. Order the kit that best suits your brake project.
( 5 )
$56.99
—
$64.99
VIAIR push-to-connect fittings attach airlines quickly and effortlessly. They are manufactured from nickel plated brass with a working pressure of 0 to 200 psi. They are also DOT approved, and available in several styles and sizes. From straight unions to swivel T-fittings, to 90 degree elbows, and more, VIAIR has the secure connections to make the installation of pneumatic systems as simple as possible.
( 1 )
$52.95
—
$98.95
McLeod quick-disconnect fittings make disconnecting hydraulic lines quick and easy. Their brass construction is naturally tough and corrosion-resistant and precision-machined to create a tight, leak-free fit. McLeod offers these quick-disconnect fittings individually or as a set, so you can choose just what you need.
Not Yet Reviewed
$59.50
The Stop Shop offers CNC-bent front brake lines that are exact factory replacements on specific vehicles, which uses the original proportioning valve and bracket. Simply remove all original rusty lines and put the new tubes in place. The brake lines are available in 304 stainless and Galfan coated steel tubing. Tube nuts are made from steel, plated for corrosion resistance; and the fittings and tube size will match factory tubes. Spring guards to protect the tubing will be in factory positions (if stock tubes had spring guards). Order the front brake lines recommended for your vehicle.
( 6 )
$50.79
—
$107.99
S.U.R.&R. 1/4 in. brake line fitting assortments will assist you with numerous brake job applications. These boxed kits come with a variety of metric and standard fittings organized in a durable storage case for easy selection. The sizes and styles included offer plenty of versatility. Convenience and efficiency—you'll have the connection you need every time with S.U.R.&R. 1/4 in. brake line fitting assortments.
Not Yet Reviewed
$65.99
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 39 )
$66.59
HardDrive replacement petcocks are designed to maximize fuel flow. They are crafted from highly polished steel, and then chrome plated. Whether you need a left spigot, right spigot, or straight down, HardDrive has the selection of replacement petcocks to bring the best out of your gas tank.
( 1 )
$59.36
—
$67.46
The Stop Shop offers a wide range of brake fittings in a variety of materials, finishes, sizes, and configurations to help you facilitate your automotive plumbing. Whether it's inverted or bubble flare fittings, unions, tees, banjo bolts, adapters or other hardware, The Stop Shop has got you covered!
( 23 )
$50.79
—
$54.99
Looking for a cool way to dress up your engine compartment? Check out our vast assortment of Summit Racing™ hose fittings. They're available in chrome plated steel, brass, stainless steel, or anodized aluminum versions. As with all Summit Racing™ parts, the fittings are designed to provide quality and a proper fit. They are available in a wide range of sizes, angles, finishes, styles, and attachment options.
( 387 )
$52.99
High performance street or race applications call for Jiffy-tite quick-connect 5000 Series fittings for safe, secure fluid connections. Offered in different series to allow you to make the best choice for your flow needs, the 5000 Series range in size from -8 AN to -12 AN, as well as 3/8 in., 1/2 in., and 3/4 in. NPT. Crafted from lightweight 6061-T6 aluminum, brass valves, and stainless steel ball bearings, these fittings are corrosion-resistant to last. Unlike with traditional threaded fittings, Jiffy-tite 5000 Series fittings one-two connections happen in seconds—and with no fluid mess! The fittings provide minimal flow for any fuel, water, or oil system and are offered with buna nitrile seals for those who to choose to burn alcohol and methanol. Get on the fast track to safer, more secure, slip-proof connections with Jiffy-tite 5000 Series quick-connect fluid fittings.
( 4 )
$51.50
—
$108.25
RapidAir Products dual port outlets are designed for use with MaxLine semi-flexible rolled compressed-air plastic tubing. The port has an inlet for your tubing (select correct diameter), and two 1/2 in. female NPT outlets which are angled to make adding attachments convenient. The outlet port also features a twist moisture drain on the bottom to help avoid getting excess water build up in the airlines. Features, specs and parts may include: * Molded nylon wall block (front of block is ported with female NPT thread) * Tubing adapter fitting (various sizes, depending on model) * Brass plugs * Drain valve * For use with mounted tubing only * Quick coupler is available, but sold separately
( 1 )
$76.99
On Sale
The chrome plating of these Mr. Gasket gas lines dresses up your engine bay, along with providing an excellent trail for your fuel to travel along. They're made of steel tubing, brass fittings, and silver-brazed connections. The hex fittings provide ample space for tightening to ensure a quick installation.
( 64 )
$99.95
$89.95
Use Jiffy-tite quick-connect 5000 Series hose ends for safe, secure, high performance connections on the street or at the race track. Quick-connect 5000 hose ends are offered in different series to allow you to make the best choice for your flow needs. They range in size from -8 AN to -12 AN, as well as 3/8 in., 1/2 in., and 3/4 in. NPT, and should be used with steel braided rubber hose. Made from lightweight 6061-T6 aluminum, brass valves, and stainless steel ball bearings, Jiffy-tite quick-connect fittings are corrosion-resistant to last. Plus, their fast one-two connection happens in seconds, unlike with traditional threaded fittings--and with no fluid mess! These quick-connect hose ends provide minimal flow for any fuel, water, or oil system and are available with buna nitrile seals for those of you burning alcohol and methanol. You're on the fast track to safer, more secure, slip-proof connections with the right choice--Jiffy-tite 5000 Series quick-connect hose ends.
( 9 )
$64.10
—
$111.91
You'll have an advantage at the track with Jiffy-tite 3000 quick-connect hose ends. Made from anodized 6061-T6 aluminum, brass valves, and stainless steel ball bearings, these fittings offer lightweight and corrosion-resistant connections. They are safer than traditional threaded fittings, protecting against the risk of leaks on a spin-out or crash. Approved for use by the NHRA and IHRA, these unique quick-connect fittings save you time in the pits with their one-two connection and no fluid mess. These fittings are available in -6 AN to -8 AN, as well as 1/4 in. to 3/8 in. NPT with valved or non-valved seals and should be used with steel braided rubber hose. Give your racer the Jiffy-tite advantage with 3000 Series quick-connect hose ends.
( 2 )
$53.38
—
$74.87
A great connection between your fuel pump and carburetor is essential, and now it takes just a couple of easy steps to complete the installation. Stromberg TwoStep 2x2 fuel lines are available to fit with a variety of pumps and intake manifolds. The 1/4 in. stainless steel lines are CAD-designed and CNC-bent for a precise fit. These connectors offer clean, hot rod styling--including furnace-brazed joints for factory looks and quality--and each line includes brass Ford nut fittings. Stromberg TwoStep 2x2 fuel lines are compatible with a number of carbs, such as Holley, Edelbrock, and Stromberg.
( 7 )
$80.00
Flex-A-Lite in-line radiator hose adapters make installing a threaded temperature sending unit easier. Just cut the radiator hose, insert the adapter, clamp it in place (hose clamps sold separately), and you'll be ready to install up to two screw-in temperature senders. Adapters are available for 1 1/2 in. or 1 3/4 in. I.D. hose and include two 1/4 in. threaded NPT ports and a 1/4 in. brass plug.
( 2 )
$71.99
—
$73.99
For an advantage at the track, choose Jiffy-tite 3000 quick-connect fluid fittings. Made from anodized 6061-T6 aluminum, brass valves, and stainless steel ball bearings, these fittings offer lightweight and corrosion-resistant connections. The 3000 Series fittings are available in -6 AN to -8 AN, as well as 1/4 in. to 3/8 in. NPT with valved or non-valved seals, including buna nitrile seals for alcohol and methanol applications. They are safer than traditional threaded fittings, protecting against the risk of leaks on a spin-out or crash and are approved for use by the NHRA and IHRA. In the time it would take to thread or unthread traditional fittings, these Jiffy-tite quick-connect fittings save time in the pits and connect and disconnect with no fluid mess. For safer, more secure, slip-proof connections, use these Jiffy-tite 3000 Series quick-connect fluid fittings.
( 11 )
$55.82
—
$62.32
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
