Availability
Showing In Stock Items. Show All 69 Items.
NotcHead hard line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all four sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for Z-bends to adjust for fittings; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead hard line clamp builder kits.
Not Yet Reviewed
$198.40
—
$215.91
NotcHead soft line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all three sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for zip ties to run lines in parallel; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead soft line clamp builder kits.
Not Yet Reviewed
$198.40
Made For You All Plumb T-clamp kits contain everything you need to achieve a professional chassis and under hood look. They are molded from non-conductive 6-6 Dupont Zytel(R) aircraft quality nylon and include a complete selection of T-clamps that make it easy to mount and route fuel lines, brake, and transmission lines, electrical wiring, battery cables, vacuum, and oil lines. They include 10/32 in. hardware for secure mounting and are available in black, blue, red, yellow, gray, and purple.
( 1 )
$105.95
—
$186.95
NotcHead braided line clamp builder kits are a great and simple way to have everything you need to for your project in one box. This kit includes lots of clips, nuts, fasteners, and self-drilling screws that go with them.
( 1 )
$198.40
NotcHead wire and cable builder clamps are the easiest way to secure your wiring and battery cables. This ultimate solution keeps lines off your painted surfaces and enables the running of parallel cables. The clamps are made from heat-resistant copolymer acetal, and NotcHead offers a half-dozen clamps with machine screws, nuts, and self-drilling screws. They also have packs without fasteners to refill your Builder kit. After the cable is installed, the screws are completely hidden, creating a clean, professional look. It's a "snap" to take your project to the next level with NotcHead. Order the outside diameter best suited for your cable application.
Not Yet Reviewed
$198.40
Lowdoller Motorsports back-pressure sensor mounting kits are designed to protect your back-pressure sensor from heat and pulsation, which improves the accuracy of data logging. These kits include all the components needed for a professional installation, including stainless steel tubing, fittings, and the canister. This saves the time and hassle of sourcing individual parts and ensures all components are rated for the high-performance application.
Not Yet Reviewed
$113.50
Peterson Fluid Systems panel mount ball valves are designed to make your next plumbing job easy and safe while maintaining a clean installation. Each ball valve is machined from top quality aluminum and given a durable and hard anodized finish and fluropolymer seals to ensure durability even in harsh environments. Peterson offers these ball valves in a variety of configurations from size to fitting selection, making sure you can find the right one for your project. Best of all, Peterson Fluid System ball valves are completely re-buildable! The panel mount design makes installation clean and sturdy, and is perfect to external or dash mounted shut-offs. Make shutting off fuel or oil easy while maintaining full flow when needed with Peterson Fluid Systems ball valves.
Not Yet Reviewed
$172.99
—
$187.99
On Sale
Summit Racing™ Flex Fuel sensor bypass/GM sensor and pigtail combo kits allow you to use the GM OEM Flex Fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM. The rest of the fuel flows around, or parallel to, the sensor, avoiding a restriction in the feed line. Our combo kits include a GM Flex Fuel sensor and pigtail for GM LS Series engines.
Not Yet Reviewed
$217.11
$200.97
On Sale
The Summit Racing™ Flex Fuel Sensor Bypass lets you use a factory-type flex fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM--and then allows the rest to flow around or parallel to the sensor to avoid a restriction in the feed line. Made from billet aluminum and hard anodized black, the bypass kits come with -6, -8,and -10 AN adapter fittings and also include methanol-resistant O-rings.
( 1 )
$139.99
$109.99
Rhodes Race Cars billet aluminum water tank caps are made specifically to support today's high horsepower turbo/supercharged vehicles with air-to-water intercooled systems. These billet tank caps are available in a variety of configurations and finishes, and come complete with hardware and O-ring for a watertight seal. No need to fight getting ice into your intercooler tank again! With a Rhodes billet aluminum water tank cap it's no longer a problem at all. Features, specs and parts included: * Billet aluminum construction * Natural or black anodized finish, with Rhodes Race Cars logo * Special thread-profile to help prevent cross threading * Ultra-lightweight flush mount design with O-ring seal * Includes necessary mounting hardware for bolt-on installation * Easy turn fill caps are available many sizes and mounting configurations to fit almost any application
( 2 )
$124.95
—
$149.95
Holley offers replacement heater hose adapters for high-mount accessory drive systems. They are designed to fit the Holley 7.3L Godzilla engine, which makes them ideal for engine swaps. Mounting hardware included.
Not Yet Reviewed
$113.05
REKUDO brake lines for the JL8 brake system include hoses, hardlines, mounts, and retaining clips. The 4-wheel disc brake upgrade (Corvette-style, 4-piston calipers for both front and rear) was offered on the 1968 Camaro as a "heavy-duty service" package sold through the parts counter at Chevrolet car dealers. In 1969, the 4-piston disc brakes could be ordered as a Regular Production Option (RPO) JL8 package on production vehicles. These high-end brakes were made available to support racing programs like the Sports Car Club of America (SCCA), and Trans-Am road racing series. This unique brake option is very rare and was only sold on about 200 production vehicles.
Not Yet Reviewed
$149.95
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 37 )
$114.99
—
$248.99
Brothers Trucks disc brake conversion brake lines make converting your classic truck's drum brake master cylinder to a disc brake master cylinder and prop valve or firewall-mount master cylinder and prop valve hassle-free. Available in stainless steel or original material, the kits do not require the use of any tubing benders or flaring tools. Choose the kit designed for your truck.
Not Yet Reviewed
$182.95
—
$213.95
Gotta Show Products transmission hose kits are perfect for upgrading your transmission hose lines. They utilize stainless steel braided hose with aircraft-quality PTFE liner, providing high-temperature reliability and abrasion resistance. Keep your transmission's performance and style cool with Gotta Show hose kits.
( 3 )
$145.99
Earl's steel-braided, PTFE Speed-Flex hose and line take special Speed-Seal hose fittings and adapters like these tee adapters. They are offered in aluminum, steel, and stainless steel. Aluminum adapters are not recommended for use in braking systems.
( 3 )
$119.95
Proform water pump adapters are an affordable way to get an electric water pump for you LS engine. The adapter kits are compatible with Proform and other brand Big-Block Chevy electric water pumps. Simply install the billet aluminum adapters to your LS block, then attach the electric water pump to the adapters. Adapter hardware and adapter-to-block gaskets are included.
Not Yet Reviewed
$134.99
RT Off-Road brake hose kits contain factory replacements designed to improve your Jeep's performance. They offer additional length for modified vehicles—a must for any lifted rig. The lines feature a tough braided stainless steel outer cover to withstand off-road hazards that may have damaged OE hoses. These RT Off-Road brake kits are available with various hose quantities and lengths, and include all hardware and fittings necessary for installation on your particular Jeep model.
( 8 )
$109.99
All Vintage Air hose kits use barrier-type refrigerant hose for use with HFC-134a and R-12 refrigerants. And when you need more length, Vintage Air has those kits, too. Vintage Air reduced barrier beadlock extended length hose kits include adequate hose length to connect to most universal systems. Kits are available with or without drier and mounting clamps. Kits include: * 14 fittings: -- 135-degree compressor fittings with service ports -- Firewall bulkhead fittings * Assorted O-rings, #6, 8, and 10 * 10 ft. of #6 reduced barrier hose * 6 ft. of # 8 reduced barrier hose * 9 ft. of # 10 reduced barrier hose * Refrigerant oil
( 1 )
$172.99
—
$183.99
Vintage Air offers SureFit reduced barrier modified hose kits that are designed for use with a complete Gen IV or Gen 5 SureFit system in vehicles without a stock engine compartment configuration and core support. The kits contains refrigerant hoses with pre-crimped reduced barrier beadlock fittings on one end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.
( 3 )
$130.50
—
$199.99
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$127.95
$115.15
March Performance air conditioning manifold fitting kits will allow you to complete the installation of your vehicle's A/C system. Several different part configurations are available for a precise fit with your particular air conditioning compressor. These aluminum fittings are available in natural and polished finishes, and hardware is included for attachment. March Performance kits typically include: * One #8 male air conditioning style fitting * One #10 male air conditioning style fitting * Two stainless steel Allen head mounting bolts
( 35 )
$107.99
—
$149.99
Summit Racing™ Pro LS heater hose kits are ideal choices for neatly routing heater hoses when LS swapping your ride. These heater hose kits include everything needed to route the heater hoses above the headers and back to the firewall, providing a clean, professional look under the hood. Kit includes: * Hose brackets and mounts * Stainless hardware for brackets * 5 ft. long heater hoses 5/8 in. and 3/4 in. * Heat shrink hose clamps
Not Yet Reviewed
$184.11
Vintage Air offers SureFit reduced barrier standard hose kits that are designed specifically for use with a complete Gen IV or Gen 5 SureFit system and the stock engine compartment configuration and core support for your vehicle. These reduced barrier standard hose kits contain refrigerant hoses with pre-crimped reduced barrier beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.
Not Yet Reviewed
$194.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
