Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JEEP CJ7 Fittings & Hoses
Showing In Stock Items. Show All 95 Items.
Dayco Standard Heater Hoses
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 43 )
$44.99
—
$52.99
Continental OE Technology Series HY-T Black Heater Hoses
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Edelmann Power Steering Return Hoses
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 61 )
$18.99
—
$69.99
Dayco Molded Heater Hoses
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 107 )
$13.99
—
$17.99
Dorman Brake Hose Locks
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$10.99
Russell Speed Bleeders
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 262 )
$15.99
Classic Tube Pre-Bent Brake Line Kits
Classic Tube manufactures top-quality, pre-bent brake lines from stainless steel or OE steel. Made with state-of-the-art, computer-driven CNC tube benders to factory specifications, these line kits come complete with fittings and are an exact match for your vehicle. Hundreds of Classic Tube kits are available, covering virtually every make, model, and braking system imaginable.
( 248 )
$164.99
—
$236.99
Continental Molded Radiator Hoses
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 451 )
$14.99
—
$25.99
Russell Street Legal Brake Line Kits
Russell street legal brake line kits will improve your braking performance for competition or everyday driving. Replacing spongy or brittle factory rubber brake lines with Russell hoses will reduce hose expansion for firmer, more responsive braking. These kits feature stainless steel braised hose with zinc-plated fittings—and are factory assembled for convenient bolt-on installation. The components meet strict DOT requirements for street-driven vehicles. Russell brake line kits are available for a wide range of specific domestic, import, truck, and SUV applications.
( 490 )
$119.95
Hayden Transmission Cooler Hoses
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$8.99
—
$37.99
Continental OE Technology Series Flexible Radiator Hoses
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 59 )
$14.99
—
$26.99
The Stop Shop Complete Brake Line Sets
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 39 )
$126.99
—
$170.99
Skyjacker Stainless Steel Braided Brake Hoses
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 132 )
$69.39
—
$135.27
Dayco Flexible Radiator Hoses
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 165 )
$13.99
—
$21.99
Dorman Brake Speed Bleeder Screws
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$11.99
Standard Motor Ported Vacuum Switches
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 14 )
$29.99
—
$42.99
OMIX-ADA Power Steering Hoses
From the pump to steering components, OMIX-ADA power steering hoses will carry on! These replacement hoses are direct fit, so the installation is easy, and you can rest assured that their performance is what you expect. OMIX-ADA offers high-pressure supply hoses and lower pressure return hoses to complete your repair and restoration needs.
( 5 )
$37.99
—
$51.99
Fairchild Industries Heater Hoses
For decades, Fairchild Industries has provided top-quality products in extruded rubber, molded rubber, molded plastic, extruded plastic, and elastomer for customers worldwide. Fairchild Industries heater hoses are designed by their in-house automotive engineers who specialize in reverse-engineering products to ensure a specific, high-quality fit, while striving to improve upon the current original equipment manufacturer parts. They feature polyester knit reinforced rubber construction, are offered in several lengths, and are ideal replacements for worn or damaged hoses.
( 9 )
$11.99
—
$20.99
Clearance
Sunsong Power Steering Hose Assemblies
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 60 )
$6.99
—
$45.99
Earl's Performance Solo-Bleed Brake Bleeders
Brake bleeding has always been an inconvenient and messy job--until now. Earl's Solo-Bleed bleeder screws will solve both problems. As direct replacements for the OEM bleeder screws, Solo-Bleeds allow you to safely bleed your brakes by yourself without the mess, and without the chance of air inclusion. They come available in many different sizes to fit virtually any vehicle.
( 23 )
$38.37
—
$47.78
Continental Heater Hose E-Z Coils
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$12.99
Hayden Transmission Line Adapter Fittings
These Hayden Automotive transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable brass, these fittings are corrosion-resistant for a lifetime of good use.
( 26 )
$14.99
Dayco Molded Radiator Hoses
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 173 )
$11.99
—
$18.99
Classic Tube Tank to Pump Lines
Classic Tube offers a wide range of fuel tank to pump lines in OE or stainless steel versions. Their state-of-the-art, computer-driven CNC tube benders create lines that fit your application perfectly. For replacement or classic car restoration, the vast Classic Tube inventory is your primary source for preformed fuel lines.
( 24 )
$93.99
—
$102.99
