Availability
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$249.95
—
$368.95
$224.95
—
$332.05
Holley offers replacement heater hose adapters for high-mount accessory drive systems. They are designed to fit the Holley 7.3L Godzilla engine, which makes them ideal for engine swaps. Mounting hardware included.
Not Yet Reviewed
$113.05
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$127.95
$70.85
—
$119.95
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
$943.95
On Sale
Holley EFI Stealth 4150 fuel logs provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. For use with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems, these fuel crossovers are easy to install, with their -6 AN male inlet that connects to your existing fuel system. They come pre-assembled by Holley to ensure a leak-free installation.
( 7 )
$75.05
$67.55
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$127.95
—
$319.95
$115.15
—
$287.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Holley offers air conditioner compressor manifolds in a variety of styles and finishes. These replacement line adapters are machined from aluminum or copper and will facilitate your A/C compressor hookup. Mounting hardware is included. Applications include vehicles with a GM LS engine.
( 8 )
$42.44
$21.73
—
$38.67
The Holley EFI vacuum manifold kit is designed for as a simple and clean solution for plumbing either vacuum or boost referenced sources. This manifold block features 12 1/8th NPT ports that can be plumbed with most common EFI transducers, such as the Holley 554-102 0-100 psi transducer. It also features two -6 O-ring boss AN ports, ensuring your manifold block has an excellent vacuum or boost reference source. Improve your engine bay organization by mounting all of your common pressure sources in one easy-to-access location! Product features: * Compatible with all transducers that utilize 1/8 NPT male threads and 7/8 in. or smaller body/hex diameter * 12 independent 1/8 NPT ports * Two -6 ORB ports * Improve engine bay organization by mounting transducers and/or vacuum lines all in one easy-to-reach location * Ideal for engines that require multiple vacuum/boost reference sources * 4 mounting holes designed for the use of 5/16 in. socket head cap hardware for secure and robust mounting * Crafted from 6061 aluminum * Anodized black for durability and laser-etched with the Holley EFI logo
Not Yet Reviewed
$73.19
Monitor your fuel pressure while you're driving with the use of Holley fuel pressure gauge fittings. They are dash mounted and eliminate the guesswork that fuel pressure can cause. They plumb near the carburetor fuel inlet and include the sending unit.
( 8 )
$8.36
On Sale
Holley manifold plug and fitting kits allow two different styles of connections within one unit. They are offered to service your mid-mount accessory drive LT/LS, BBC, and SBC cooling manifolds. These genuine Holley fittings are constructed from aluminum and feature a chrome finish for longevity.
( 2 )
$43.69
$18.18
—
$39.32
On Sale
Holley MAP sensor port plugs are milled from billet aluminum for strength, powdercoated for corrosion resistance, and include an O-ring for a tight seal. They're designed to eliminate LS3-style MAP sensors and work with most intake manifolds.
( 5 )
$36.14
$32.53
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
