Automotive Exterior Parts & Accessories at Summit Racing

Dorman Wheel Hub and Bearing Assembly Repair Kits

Dorman wheel hub and bearing assembly repair kits come with the hub and critical bearing replacement components for a complete repair on specific vehicle applications. This assembly saves time by eliminating the work required to remove individual corroded components. Dorman wheel hub and bearing assembly repair kits are precision-engineered to match the dimensions of original equipment for a reliable fit.

Not Yet Reviewed

$130.99

Clearance

Dorman Pre-Pressed Wheel Hub Assemblies

Dorman pre-pressed wheel hub assemblies are time-saving and cost-efficient solutions for complete hub assembly repairs. Dorman OE FIX offers one pre-assembled unit, consolidating all four components and ready for installation right out of the box—significantly cutting labor time. The dealer repair option is to purchase components separately, requiring a specialized shop press and/or labor-intensive assembly prior to installation. Dorman OE FIX is the better option. Order the model designed for your vehicle application. Dorman pre-pressed wheel hub assemblies feature: * No special shop press tool required during installation, saving one to two hours of labor * Component pieces are factory manufactured and assembled under rigorous quality control measures, delivering higher consistency to meet or exceed the application needs * Cost-savings advantage to purchasing components separately * Constructed from quality materials for high performance and durability

4.68 out of 5 stars ( 37 )

$167.99

$91.99

—

$309.99

AutoLoc Bear Claw Latch Sets

AutoLoc Bear Claw latch sets feature dual claws and striker bolts that provide awesome gripping strength and rugged good looks. They include an all-steel mechanism and are the strongest latches on the market. These sets are perfect for doors with shaved handles because of their lever-action triggers, 3-stage locking system, and 5-coil steel springs, which allow the Bear Claw latches to generate over an inch more throw than many types of doors. Available in small or large sizes, Autoloc Bear Claw latch sets are designed to ensure your vehicle's doors operate more efficiently.

2.64 out of 5 stars ( 11 )

$69.95

—

$139.95

AutoLoc Bear Claw Door Prop Kits

AutoLoc Bear Claw door prop kits are designed to hold your doors open at car shows to display your awesome interior--without worries of the wind blowing your door closed or people opening the doors and stepping into your car. One end slips over the striker bolt and locks into position, while the other end locks over your latch jaws. The props feature a high-grade polished steel rod with billet aluminum ends and protective nylon cap on the end. They're designed for use with rotary-type latches only.

4.91 out of 5 stars ( 11 )

$89.80

AutoLoc Bear Claw Trunk Latches

Are you tired of dealing with a faulty trunk latch on your vehicle? AutoLoc has the solution with their Bear Claw trunk latches, high-quality replacements for your vehicle's factory unit. They're ideal for custom jobs or restoration projects. Each latch has solid steel construction and is CAD-engineered for an excellent fit and flawless performance. They also feature a rotary claw latch, high-tension springs, and an effective safety arm. Some models include a striker bolt. Detailed instructions are included—so you'll save time and money with an easy swap!

5.0 out of 5 stars ( 3 )

$39.95

AutoLoc Bear Claw Latch Installation Kits

AutoLoc's bear claw latch install kits make installation a snap! Autoloc uses state-of-the-art CAD construction techniques to ensure ultra-accurate dimensions, resulting in easy alignment even for the "weekend mechanic." Heavy-duty all-steel components facilitate a long life of smooth operation. Kits include door section mounting plates with die-stamped screw holes to avoid scraping your door sill paint when closing—plus floating sticker bolt plates to assist with easy alignment and installation. Order the kit needed for small bear or large bear claw applications.

3.67 out of 5 stars ( 3 )

$49.95

Trail-Gear Swing-Out Spare Tire Spindles

If you have been dreaming of building your own burly rear bumper with a swing-out to carry all your favorite overland accessories, these heavy-duty swing-out spare tire spindles from Trail-Gear will make that dream a reality! These 1.75 in. O.D. spindles are crafted from 1018 steel and will offer endless possibilities for your fabrication needs. Simply weld the swiveling hinge to your bumper to provide a pivot point that can support a carrier for your spare tire, fuel can, bike rack, or cooler. Be sure to support the floating side of your swing-out with a sturdy latch to maximize the life of your carrier. Trail-Gear swing-out spare tire carrier spindles are available with or without rotation locking hardware that allows the swing-out to be locked into place while loading and unloading cargo. Both spindle kits include bearings, seals, and bearing cap. Select the kit you prefer.

3.5 out of 5 stars ( 2 )

$139.99

—

$149.99

DV8 Offroad Jeep JK Bumper Add-On Tire Carriers

DV8 Offroad Jeep JK Bumper Add-On Tire Carriers extend from the bumper (RS-10 and RS-11) to the Jeep's rear tailgate. Much like the DV8 RS-2 Tire Carrier, it opens along with the tailgate in one step, rather than the 2-step process of opening a standard swing-away tire carrier. This carrier is designed to bolt onto your existing RS-10 or RS-11 bumper, so that if you're on a budget you can purchase the bumper and then the tire carrier when ready. It's precision CNC laser-cut with a multitude of mounting points so you can get creative with your hi-lift jack, gas and water cans, or whatever else you like to bring with you. After being laser-cut, the pieces are sent to be expertly welded, and then finished with a black powdercoat. The final product is a solid tire carrier that can handle the load of any Jeep adventure. Additional notes: * Latches to tailgate * Bolts onto RS-10 and/or RS-11 rear bumpers * Simple installation

Not Yet Reviewed

$699.99

Eddie Motorsports Billet Hood Hinges

Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.

4.24 out of 5 stars ( 135 )

$525.95

—

$998.95

Trique Manufacturing Altman Easy Latch Kits

Trique Manufacturing Altman Easy Latch kits make your door operation as smooth as your classic's looks. Over the years, door latch mechanisms take a real beating. These kits restore safe, secure action with their vehicle-specific, bear jaw-style latch system. And, you get to keep your existing inside and outside door handles, as well as your outside lock cylinder. Altman kits require no welding and include everything you need for both doors. So, if you find yourself slamming your doors to shut them, yanking on them to open them, or, even worse, they're flying open while you're going down the road, it's time for Trique Manufacturing Altman Easy Latch kits. They're built just like your classic ... to last! Features include: * Case-hardened steel latch paws * Stainless steel striker pins and internal springs * 2-position catch system * Latch body and levers are zinc plated to provide corrosion protection * Internal paws are black oxide coated to resist abrasion

4.4 out of 5 stars ( 88 )

$324.99

—

$414.99

CarCapsule Indoor Vehicle Enclosures

Give your treasured vehicle the protection it deserves from dust, dirt, dings, corrosion, mildew, musty odors, pests, and insects with a CarCapsule indoor vehicle enclosure. They're great for maintaining that showroom shine all year-round! The CarCapsule—or bubble, as it's also known—provides an easy-to-use, debris-free enclosure for cars or trucks. And, they're easy as 1-2-3 to set up in less than 15 minutes! Once your car is positioned on the base mat, attach the fan, zip it up, and plug it in. No assembly is required. The washable charcoal filter and high-cfm fan will keep contaminants out, maintaining a pristine environment inside! Order the size needed for your particular vehicle. Additional features of CarCapsule indoor vehicle enclosures: * Durable, clear PVC top cover * Base mat is mildew, abrasion and flame-resistant * Heavy-duty base mat is impervious to oil, gas, and antifreeze * Rust-free: 100 percent nylon self-healing coil zippers * No metal parts inside, no metal frame, and no bare metal * Fan: 190 cfm at 4200 rpm, dual ball bearing for continuously filtered airflow * 12 V, 1.5 amp power transformer * Includes fan, power supply, and washable charcoal filter * CarCapsule comes in 12, 14, 16, 18, 20, and 22 ft. lengths

5.0 out of 5 stars ( 5 )

$649.00

All American Billet Silverline Series Hood Hinges

All American Billet Silverline Series hood hinges are machined from 6061-T6 aluminum, black anodized with silver accents on the edges of the arms and cutouts, where applicable. Stainless steel gas springs and hardware prevent rust, and larger bearings make operation a breeze. The hood hinges are available in classic, holed, or slotted styles. Order the pair recommended for your vehicle application.

5.0 out of 5 stars ( 2 )

$934.94

All American Billet Hood Hinges

Showing off a wicked engine is great, unless everyone's attention is on the old, standard hinges holding up the hood. All American Billet hood hinges are machined from 6061-T6 aluminum and engineered to operate smoothly. Their stainless steel gas springs and hardware prevent rust, and the larger bearings make operation a breeze. All American Billet hood hinges are available numerous styles—in natural, polished, and black anodized finishes. Order the pair recommended for your vehicle application.

4.13 out of 5 stars ( 8 )

$522.95

—

$949.95

Retrax One MX Tonneau Covers

Matte black has become a popular finish on automotive parts like fender flares, wheels, grilles, bumpers, and trim. Now you can carry that look onto the top of your truck bed with Retrax One MX tonneau covers! They feature a durable and scratch-resistant matte black powdercoat designed to look great for years. Excellent seals and weatherstripping keep your cargo dry, while the retractable cover can be locked in any position for full, partial, or zero coverage. These one-piece Lexan polycarbonate covers have strong impact resistance, and are engineered without hinges for better performance in the sizzling summer, leafy fall, heavy winter, and rainy spring. Sealed ball bearing rollers on aluminum support beams allow your tonneau cover to easily close or open into its 11 in. squared spiral track container—which prevents the cover from contacting itself, keeping wear and tear to a minimum. For a low-profile, clamp-on cover that looks great and offers strong protection, choose the Retrax One MX tonneau cover designed for your truck bed.

4.89 out of 5 stars ( 9 )

$1,499.99

—

$1,699.99

Scott Drake Billet Hood Hinges

Scott Drake billet hood hinges will replace your worn out flimsy stock hood hinges in just minutes for a custom look. Built from T6 hardened 6061 billet aluminum, these hinges are assembled with stainless steel hardware and struts, plus sealed bearings at all the joints means your hood will open smoothly and with ease. Stainless steel hardware and sealed ball bearings provide years of worry-free service. The hinges are then polished and clear anodized for a show worthy but tough finish and are a perfect addition under any hood. For all of your classic Mustang needs, look no further than Scott Drake.

Not Yet Reviewed

$614.95

Westin WJ2 Rear Bumpers with Tire Carrier

Westin's WJ2 rear bumper with tire carrier is constructed with 3/16 in. plate steel with an 8-gauge tire carrier. The tire carrier is designed to work with or without factory or Westin hitches and opens and closes with the tailgate. Tapered roller bearings and two turnbuckle heim links improve carrier rigidity, while a bolt-on spindle allows adjustment of the carrier separate from the bumper. These rear bumpers with tire carrier feature integrated recovery shackle mount points, as well as additional mount points for auxiliary lights and Rock lights. They also include two off-road jack points and a bottom frame mount that prevents the bumper from rotating. Installation instructions and mounting hardware included. Select the WJ2 rear bumper with tire carrier to fit your application needs.

5.0 out of 5 stars ( 1 )

$1,097.98

—

$1,287.98

ANCO 97-Series Wiper Blades

ANCO 97-Series wiper blades offer the clearest choice! These premium conventional blades feature the Redi-Fit simplified wiper blade connection system making the blade ready to install right out of the package. They come equipped with DuraKlear Plus--an exclusive, advanced rubber compound that provides a consistent streak-free wipe. They also have a patented link with a polymer bearing surface that eliminates metal-to-metal abrasion and improves rotational performance as well as blade flexibility. ANCO 97-Series wiper blades are corrosion-resistant and available in a range of sizes.

Not Yet Reviewed

$3.50

—

$5.99

Eddie Motorsports Billet Lightning Hood Hinges

Eddie Motorsports Billet Lightning hood hinges feature a custom windowed design. These high strength hinges utilize sealed bearings and stainless steel nitrogen gas struts for smooth operation. The Billet Lightning hinges are available for steel, fiberglass, and carbon fiber hoods. The hinges are also available in multiple colors and finishes to suit your style.

Not Yet Reviewed

$676.95

—

$799.95

Seizmik Photon Side View Sport Mirrors

Seizmik Photon side view sport mirrors feature a sleek, horizontal design and new ball joint mounting system created to complement most any UTV, particularly sport Side x Sides. The ball joint and low-profile clamp allow for a wide range of motion and a breakaway feature, plus they accommodate the various A-pillar angles created by OEM or custom cages. Seizmik Photon side view mirrors include replaceable, convex mirror glass and, as always, are backed by Seizmik's Unlimited Lifetime Warranty. Choose the set that fits your off-road machine. Features: * Solid aluminum mirror guard * Convex mirror surface * Shatter-resistant safety glass * Stainless steel ball joint with nylon bearing * Low-profile round tube bracket * Reinforced solid aluminum housing * Aluminum accent badge * Solid aluminum lock block * 304 stainless steel hardware

Not Yet Reviewed

$197.59

Clearance

Retrax PowerTrax One MX Tonneau Covers

Remote controls make it easy to change channels, start a vehicle—and now open or close your truck bed cover. Retrax PowerTrax One MX tonneau covers combine a scratch-resistant matte black cover with a key fob remote for easy control. Excellent seals and weatherstripping keep contents in the bed dry, while the retractable cover uses an electromagnetic brake to lock it into any position along the rail. These one-piece Lexan polycarbonate covers have strong impact resistance and are engineered without hinges for better performance in the sizzling summer, leafy fall, heavy winter, and rainy spring. Sealed ball bearing rollers on aluminum support beams allow your cover to easily close or open into its 11 in. squared spiral track canister—which prevents the cover from contacting itself, keeping wear and tear to a minimum. The remote also has an on/off button for a cargo light attached to the canister. A Retrax PowerTrax One MX tonneau cover will complement the looks of your truck and keep your cargo safe with the touch of a button.

Not Yet Reviewed

$2,449.99

$1,197.50

Rough Country Trail Bumpers with Tire Carriers

You and your friends can beef up the rear-ends on your vehicles with bolt-on Rough Country trail bumpers with tire carriers. These stylishly rugged rear bumpers feature durable steel construction and a swing-out motion that won't buckle under the weight of an oversized (up to 37 in.) wheel and tire, thanks to the smooth-operating Heim bearing. You will also be able to retain factory options like a third brake light, backup camera, and more thanks to simple relocation systems. Transform your vehicle into a legend with an assist from the Rough Country trail bumpers with tire carriers best suited for your application. More product features and items may include (application dependent): * Several tire mounting points to dial in the exact height and depth for a precise fit * Tire carrier swings effortlessly out of the way along with the factory tailgate * Designed to re-position the third brake light above the spare tire * License plate kit re-positions and illuminates rear plates * Matching black D-ring set (optional colors and designs available separately) * Corrosion-resistant black finish * Hardware kit with detailed instructions that include a list of components and torque specifications

Not Yet Reviewed

$999.95

All-Pro Off-Road High-Clearance Dual Swing-Out Rear Bumpers

All-Pro's high-clearance dual swing-out rear bumpers feature aggressive style with space-saving storage for your spare tire and extra gear. All-Pro's dual arm design dramatically decreases the clearance radius required, virtually eliminating chances of interfering with anything you may have in tow. Each arm has two open locking positions at 90-degrees and 135-degrees—and the modular bolt-together system means no welding required. The right-side arm can accommodate an oversized spare up to 37 in., while the left- side arm offers numerous storage options like All-Pro's fully compatible swing-out bumper ice chest holder (sold separately). The bumpers are available in bare (raw steel) or black powdercoat versions. Free-up valuable storage space without sacrificing bed accessibility with All-Pro's high-clearance dual swing-out bumper! Features and specs: * Constructed From 3/16 in. ASTM A36 structural steel, 3/8 in. and 1/2-in. thick gussets, and DOM Tubing * Available in bare or black powdercoat finishes * High-clearance design with improved departure angles * 100 percent bolt-on installation * Dual swing-out arms fully sealed greaseable tapered roller bearing hinges * Spare tire arm DOM tubing is .188 wall to reduce vibration and accommodates up to 37 in. tire * Accessory arm DOM tubing is .120 wall and accommodates optional, interchangeable aluminum accessory carriers * Swing-out arm design includes automatically locking slam latches with stainless steel wear plates—each arm locks open at either 90-degrees or 135-degrees * Bumper includes integrated rear-facing LED lights and built-in mounting bracket to relocate the backup camera * If a tow hitch is required, order optional 2005-2015 Tacoma Receiver Hitch—the factory hitch will not work with this bumper! * Includes flip-up license plate holder

Not Yet Reviewed

$2,199.99

—

$2,449.99

All-Pro Off-Road Dual Swing-Out Bumpers

All-Pro's 2016-current Tacoma dual swing-out bumpers combine an aggressively styled high-clearance bumper with space-saving storage for your spare tire and extra gear, and free-up valuable storage space, without sacrificing bed accessibility. All-Pro's dual arm design dramatically decreases the clearance radius required, virtually eliminating the chance of interfering with anything you may have in tow. Each arm has two open locking-positions at 90-degrees and 135-degrees. The modular bolt-together system requires no welding for installation. The right-side arm can accommodate an oversized spare up to 37 inches, while the left-side arm offers numerous storage options, like All-Pro's fully compatible swing-out bumper ice chest holder (sold separately). More features and specs: * Bumper constructed from 3/16 in. ASTM A36 structural steel, 3/8 in. and 1/2 in. thick gussets, and 1020 DOM tubing * Available in bare (raw steel) or black powdercoat finish * High-clearance design with improved departure angles * 100 percent bolt-on installation * Dual swing-out arms with fully-sealed greaseable tapered roller bearing hinges * Spare tire arm DOM tubing is .188 wall to reduce vibration and accommodates up to 37 in. tire * Accessory arm DOM tubing is .120 wall and accommodates optional, interchangeable aluminum accessory carriers * Swing-out arm design includes automatically locking slam latches with stainless steel wear plates—each arm locks open at either 90-degrees or 135-degrees * Bumper includes integrated rear-facing LED lights and a built-in mounting bracket to relocate the backup camera * If a tow hitch is required, order an optional 2016-Current Tacoma Receiver Hitch—the factory hitch will not work with this bumper! * Includes flip-up license plate holder Note: Although the bare bumper comes fully sanded and ready for paint, please be advised that the mill scale will vary depending on the lot.

Not Yet Reviewed

$2,199.99

—

$2,449.99

UWS Drawer Slide Series Toolboxes

Add more tool access and get more organization with UWS Drawer Slide Series toolboxes! These slim, upright boxes are perfect additions to your work vehicle to stow the tools you use most often. UWS Drawer Slide boxes offer five precision-injected, commercial-grade drawers with corrosion-resistant, zinc plated metal slides and stainless steel ball bearings for super-smooth operation. These aluminum toolboxes have stainless steel T-handle locks and MicroSeal stripping for rust-free security that seals out moisture, dust, and dirt. Mounting hardware is included, too, making your install a done deal! Be efficient--keep your most-used tools at hand with UWS Drawer Slide Series toolboxes.

Not Yet Reviewed

$666.95