Exhaust
Availability
Your car or truck was originally equipped with a restrictive, small-diameter exhaust system that was designed for one purpose: to be as quiet as possible. Uncork your...
Your car or truck was originally equipped with a restrictive, small-diameter exhaust system that was designed for one purpose: to be as quiet as possible. Uncork your vehicle’s exhaust flow with a performance exhaust system and you’ll restore lost horsepower and torque, and produce that iconic performance sound. We have complete cat-back exhaust systems and power-adding headers made from lightweight aluminized steel, or from rugged stainless steel, with many available polished to a show-ready shine. Or choose from exhaust parts such as the individual pipes, tubes, flanges, and turndowns you need for a custom setup, plus...
Your car or truck was originally equipped with a restrictive, small-diameter exhaust system that was designed for one purpose: to be as quiet as possible. Uncork your vehicle’s exhaust flow with a performance exhaust system and you’ll restore lost horsepower and torque, and produce that iconic performance sound. We have complete cat-back exhaust systems and power-adding headers made from lightweight aluminized steel, or from rugged stainless steel, with many available polished to a show-ready shine. Or choose from exhaust parts such as the individual pipes, tubes, flanges, and turndowns you need for a custom setup, plus replacement or performance mufflers from mellow to aggressive, and even catalytic converters to keep you legal.
Showing In Stock Items. Show All 43 Items.
On Sale
Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.
( 33 )
$299.95
$255.55
—
$299.95
Schoenfeld S-10 forward exit conversion headers fit your small block Chevy engine. These steel headers exit at front mid-fender. They are shipped with a temporary non-high-temperature paint to protect the headers and they are available with standard, spread port, or 18 degree flanges.
( 8 )
$466.99
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$425.45
—
$1,747.95
$382.90
—
$1,573.16
On Sale
Patriot full length street rod headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which result in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing that's available in your choice of bare or ceramic coated finishes, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 13 )
$462.05
—
$679.00
$415.84
—
$611.10
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 322 )
$288.05
—
$774.50
$259.24
—
$697.05
On Sale
Patriot's popular 1955-57 Chevy passenger car headers for small block, big block, and LS1/LS6 swaps offer superior performance and fit. These headers feature durable 18-gauge tubing, accommodate the GM 605 power steering box conversion, and fit most motor mounts. Their extra ground clearance makes "slammed" cars drivable and above-frame rail exhaust system installation easy. Patriot Tri-5 headers come with gaskets, header bolts, and collector reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects the headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection. * Raw steel is available for individual customizing
( 128 )
$299.95
—
$880.60
$269.96
—
$792.54
On Sale
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 252 )
$305.00
—
$848.75
$274.50
—
$763.88
On Sale
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$605.80
—
$1,211.10
$545.22
—
$1,089.99
On Sale
Patriot Roadster/Sprint Car headers are setting standards in style, quality, and performance for "Fad T" and '32 Hi-Boy headers. They offer T-buckets a choice between their classic or high performance Sprint-style headers for small and big block Chevy, as well as small block Ford engines. And if you want, you can match these headers with Patriot turnouts and integral mufflers for a complete exhaust system. Patriot Roadster/Sprint Car headers are available in a choice of finishes, including a show-quality chrome that is applied to headers that have been polished before and after assembly to assure ultimate chrome quality 360 degrees around all pipes. Additional finishes for Patriot Roadster/Sprint Car headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 16 )
$362.95
—
$933.65
$326.66
—
$840.28
On Sale
Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 65 )
$299.95
—
$774.50
$269.96
—
$697.05
On Sale
Patriot cast iron manifolds designed for GM LS engines offer a wide variety of fitment applications maximizing engine bay clearance. They also incorporate a sealing dome and ships with a pair of 304 series stainless steel reducers to help route your exhaust system with more adjustment options than the competition--no more expensive GM gaskets needed to get you on the road. Patriot cast iron manifolds will fit many of their LS engine swaps. Finishes offered for Patriot cast iron manifolds: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw cast is available for individual customizing
( 15 )
$348.50
—
$492.80
$313.65
—
$443.52
On Sale
Patriot Lakester headers adds nostalgia to your hot rod. Their traditional Lakester design captures the look and performance reminiscent of the Bonneville and Dry Lakes racers. They are engineered for use with no other exhaust system providing that open header style and sound you crave. Finishes available for Patriot Lakester headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 4 )
$568.65
—
$833.90
$511.78
—
$750.51
On Sale
Patriot fat-fendered street rod headers are long-tube designs. These full-length "up and over" style headers provide the ultimate performance with longer primary tubes for maximum torque and horsepower that will fit most chassis. Finishes for Patriot fat-fendered street rod headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 7 )
$422.45
—
$870.00
$380.20
—
$783.00
Gibson headers are performance-tuned and engine-matched to unleash your vehicle's full potential. These headers are well-suited for lowered or raised pickups and tow vehicles—because the performance gains are engineered to come in at low and midrange rpm highway speeds. They feature mandrel-bent primary tubing for increased flow, and they bolt on quickly and easily. Installing Gibson headers will give you increased horsepower and response and a cooler-running engine. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Gibson headers are available in a variety of sizes, configurations, materials, and finishes. Order the model recommended for your vehicle.
( 174 )
$682.99
—
$1,040.99
On Sale
Don't give up looking for headers for your vehicle. Patriot offers headers for many applications at prices you can afford. These specific-fit headers are built with surface-machined thick steel flanges for a great seal and mandrel-bent mild steel tubing. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 12 )
$368.45
—
$668.40
$331.60
—
$601.56
On Sale
Patriot offers affordable racing headers for many applications in the popular IMCA Modified, Sprint Car, Late Model Sportsman, Street Stock, Mini-Stock, and Pony Car classes. These headers use precision-machined flanges and lightweight, but strong, 18-gauge tubing. Mandrel-bent primaries and long transition collectors reduce backpressure for increased exhaust velocity. Some applications are available with Patriot's stepped pipe design to help broaden the torque curve for better corner acceleration. Patriot race headers are offered in a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
Not Yet Reviewed
$299.45
—
$369.95
$269.50
—
$332.96
On Sale
Patriot Lakester headers adds nostalgia to your hot rod. Their classic Lakester design allows for hookup to an under chassis exhaust system, but by removing the provided block-off plates you can easily uncork your headers. Finishes available for Patriot Lakester headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 3 )
$656.20
—
$981.40
$590.58
—
$883.26
Heatshield Products battery cable shield sleeves ensure optimal performance and reliability. Designed for serious automotive applications, these durable sleeves shield battery cable wires and essential electrical lines from extreme heat and abrasion, blocking up to 60 percent of radiant heat to keep performance wiring cool. Ideal for performance builds, restomods, and off-road vehicles, each Heatshield kit includes two red and two black heat shrinks for a clean, professional installation. Dealing with extreme underhood heat? Lower the temperature with Heatshield battery cable sleeves. Select the sleeving designed for the gauge of your battery cable. Features and specs: * Withstands 1,100 degrees F (593 degrees C) continuous heat * Withstands 2,000 degrees F (1,093 degrees C) intermittent heat * Flexible weave expands over terminals and tight bends * Shields wiring from abrasion in high-vibration, high-speed environments * Prevents wire failure and melt in turbocharged and track-ready builds
Not Yet Reviewed
$29.99
—
$45.99
Heat from your bike's exhaust system can become uncomfortable, especially riding in slow traffic. This issue really comes into focus for those with shorter legs, as well as the reluctance to disrupt the attractive lines and appearance of your motorcycle's exhaust. DEI heat shield liners insulate the outer heat shield without disturbing the looks of your bike. Each piece is precision cut to fit in-between the exhaust pipe and the heat shield, blocking heat transfer and lowering the surface temperatures of the outer shield. The kits are easy to install with no permanent modifications needed and feature dual-layer aluminum construction along with DEI's proprietary Dura 2000 insulating material that offers over a 60 percent reduction in heat. Choose the heat shield liner kit designed for your motorcycle. Additional features and benefits: * Reduces heat radiating from exhaust system giving the rider and passenger a cooler ride * CNC-cut for a perfect fit * Installs inside factory shield to be completely hidden when installed * Aluminum layer reflects heat from exhaust * Insulating material keeps heat away * Complete head pipe kits
Not Yet Reviewed
$31.99
—
$74.99
Gibson Single exhaust systems are Gibson's most popular exhaust … the systems you can trust when you want reliable performance from your truck. Perfect for towing and general performance applications, Gibson Single exhaust systems use popular Superflow performance mufflers that offer increased power at a cost-effective price. These are Gibson's best performing exhaust systems. Dyno results show that they make maximum torque and horsepower at the lower-end of the power band (1800 to 3000 rpm) with a deep, aggressive exhaust tone. A polished or black ceramic coated T304 stainless steel tip with clamp less connection design is included with each kit. Select systems also include a Xtreme Terrain (XT) tip. These turn-down pipes can be installed in place of the standard tip to provide extra ground clearance for treacherous terrain. Features of Gibson Single exhaust systems include: * Big block sound * Minimal interior sound levels * Heavy-duty aluminized steel or stainless steel tubes for extended durability * Mandrel-bent tubing maintains constant exhaust flow through each bend for outstanding performance * Zinc plated hangers and clamps * Easy, no-drill installation; no welding required
( 255 )
$423.99
—
$894.99
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$899.95
$808.95
AP Exhaust universal catalytic converters will work to make your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering comprehensive coverage, AP Exhaust can provide universal catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust universal catalytic converters offer the quality, fit, and value to meet those concerns.
( 6 )
$59.99
—
$1,626.99
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$179.99
—
$1,427.99
MagnaFlow Off-Road Pro Series turndown systems provide an aggressive exhaust note and allows for use on vehicles with highly modified suspension systems. They provide the versatility to accommodate nearly every configuration, including lifted, lowered, air bagged, and long travel. Additionally, they're engineered for maximum power and minimal weight. These systems also eliminate the need for custom fabrication with true bolt-on fitment. Increase performance and turns heads with MagnaFlow Off-Road Pro Series turndown systems.
( 27 )
$702.00
—
$768.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
