Truck Exhaust Systems & Mufflers

On Sale

Pypes Race Pro Dual Exhaust Systems

Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required

4.28 out of 5 stars ( 171 )

$609.79

—

$1,400.79

$548.81

—

$1,260.71

Corsa Xtreme Exhaust Systems

Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.

4.78 out of 5 stars ( 132 )

$1,041.99

—

$2,799.99

On Sale

Roush 2021-24 Ford Bronco 2.3L and 2.7L Cold Air Intakes and Exhaust System Combos

Roush 2021-24 Ford Bronco 2.3/2.7L cold air intake and exhaust system combos pair perfectly matched components in one performance package to upgrade your SUV with awesome advantages. Roush Performance axle-back exhaust systems blend performance, convenience, and style for your Bronco. They maximize the power of your SUV with robust, corrosion-resistant T-304 stainless steel construction, high-flow mandrel bent tubing for optimal performance, and a high-quality stainless steel muffler to enhance your driving experience with an aggressive tone. A detachable, black-coated exhaust tip etched with the Roush "R" logo completes each system, and is removable to increase the departure angle for off-road adventures. Designed for effortless installation, they utilize existing exhaust hangers and mounting points. Roush Performance air induction systems enhance your Bronco's performance. Drawing from their extensive off-road racing experience and advanced engineering expertise, these systems expand the air filter's surface area without altering the engine compartment. Roush air induction systems are constructed from robust injection-molded plastic, featuring an easy-to-clean texture that seamlessly matches the underhood panels for a factory-original appearance. An innovative see-through window allows for quick monitoring of the air filter condition during off-road adventures, while the included specially designed pre-filter repels water and blocks larger debris, maintaining the cleanliness and efficiency of the filter. It is adorned with the Roush "R" logo. Experience the thrill of enhanced acoustics and performance provided with a Roush 2021-24 Ford Bronco cold air intake and exhaust system combo. Additional exhaust highlights: * Throaty Roush exhaust tone * Increased turbo sound * Doesn't hang as low as OE muffler (improved clearance and departure angle) * High-flow, less restrictive muffler Additional cold air intake highlights: * 30 percent more filtration area than OE filter * Maintains factory water fording capability (prevents water ingestion into the engine) * Intake gasket included for an airtight seal * Factory mounting locations and hardware are utilized for quick and easy installation * Easy to clean/no oiling required * Increased air intake sound * Roush plaque

Not Yet Reviewed

$999.99

$899.99

Corsa Sport Exhaust Systems

Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.

4.8 out of 5 stars ( 290 )

$823.50

—

$3,140.98

aFe Atlas Exhaust Systems

Engineered to perform in the most extreme environments, aFe Atlas exhaust systems are constructed from mandrel-bent aluminized steel tubing with high-quality band clamps and OE-style bayonet hangers. Where applicable, free-flowing aluminized steel mufflers are used to absorb high-pitch tones producing a powerful sound and unleashing more horsepower and torque out of your rig. Atlas systems use factory mounting locations to provide a quick, hassle-free installation. Also included with some of these diesel exhausts are wrinkle-black powdercoated or polished 304 stainless steel tips with laser-cut stainless steel aFe badges. aFe Atlas exhaust systems are a tremendous combination of performance, fit, and value. Features include: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (some applications) * Available in a variety of configurations (varies by model) * Select systems include dual outlets and exhaust tips * Most do NOT fit cab and chassis models * Some models require tailpipe hanger modifications Notes: * Many of these are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws. * Select aFe Atlas exhaust systems may also require an aftermarket electronic module to work properly.

3.33 out of 5 stars ( 3 )

$420.00

—

$871.00

Corsa Touring Exhaust Systems

Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance Exhaust have created the ideal exhaust systems for you. Corsa Touring exhaust systems employ a straight-through, non-restrictive design. They're coupled with patented reflective sound cancellation science to tune out annoying low frequencies that cause droning—and leave you with a crisp, clean sound. This innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. These refined, distinctive sounding exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on quickly with no cutting or welding. They're bold when you want them to be, and quiet when you need them to be.

5.0 out of 5 stars ( 6 )

$898.50

—

$1,833.99

aFe Large Bore-HD Exhaust Systems

aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.

3.25 out of 5 stars ( 12 )

$349.00

—

$1,153.00

Gibson Muscle Car Exhaust Systems

Gibson Muscle Car exhaust systems deliver a deep powerful exhaust tone that screams performance. Each system is designed to reduce backpressure with mandrel-bent tubing and includes black ceramic coated or polished, intercooled T304 stainless steel tip(s). These exhaust systems include Gibson's Superflow performance mufflers with convergent flow technology (CFT) that tunes your exhaust by using resonance chambers, directional louvered tuning ports, and angular induction to draw exhaust gases into the muffler and expel it at a higher velocity. Adding more power and more sound is easy with Gibson axle-back exhaust systems. If even more performance and better sound are your priorities, look no further than Muscle Car dual cat-back systems. They are the pinnacle of performance and style. Select dual cat-back systems include an equal length X-pipe. Key features of Gibson Muscle Car exhaust systems: * Available in aluminized steel or stainless steel for extended durability (depending on application) * CFT mufflers use a chambered and louvered design with no baffles to become brittle and no packing to deteriorate * Hassle-free, bolt-on installation with professional looking results * Enhanced low and mid-range power * Powerful exhaust tones * Minimal interior sound levels * Maximum horsepower and torque gains * Includes all hardware and OE-style hangers * Select systems available with black ceramic coated mufflers

3.75 out of 5 stars ( 16 )

$570.99

—

$1,204.99

Corsa Variable Sound Exhaust Systems

Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Variable Sound exhaust systems employ a straight-through, non-restrictive design. They're coupled with Corsa's patented reflective sound cancellation science—to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. These exhaust systems also integrate directly to the stock NPP valve actuator and also reuse the NPP module. The Corsa Variable Sound exhaust systems are built from premium stainless steel with mandrel bends—and are available with your choice of polished or black tips. Developed to fit right, Corsa exhausts install quickly with no cutting or welding. They're bold when you want them to be, and quiet when you need them to be.

5.0 out of 5 stars ( 2 )

$1,954.11

On Sale

Dinan Valved Exhaust Systems

Dinan valved exhaust systems are available in cat-back and rear axle back options for a variety of Toyota applications. These exhausts convey the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan; in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, Dinan exhaust systems are a straightforward install with precision fitment, just like you'd expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100 percent T304 stainless steel, TIG-welded and free of hydroformed pipe, each upgraded system is a marked improvement from its predecessor—both in terms of material/construction and overall looks. For weight savings and simplicity, the stock single-to-dual pipe setup has been abandoned in favor of an enlarged, free-flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3mm (4.5 in.) exhaust tips emblazoned with the laser-engraved Dinan logo. The tip branding further cements any lingering doubt that the system visible is something above and beyond stock. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes, making the vehicle a delight to drive and enjoy. However, for those who want options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons), factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open—and emit more subdued resonant vocals when the valve is closed; and exhaust gases are wholly redirected through the muffler. It's the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, Dinan valved exhaust systems are the answer for discerning enthusiasts looking for sound without sacrifice. Additional product features: * Maximum gains of +6 HP and +5 lbs.-ft. of torque * Enjoyably louder, sportier sound * Drone abatement technologies used to reduce cabin resonance * Dual 4.5 in. (114.3mm) double-walled clamp-on tips with laser-engraved Dinan logo * Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) * 100 percent 304 stainless steel construction * Retains factory valve control * Factory-like fitment with included mounting hardware * Tips available with polished or black ceramic coated finish

Not Yet Reviewed

$1,649.95

$1,483.95

—

$2,254.95

Stillen Competition Series Exhaust Systems

Stillen Competition Series exhaust systems deliver the best performance, best flow, and best sound. These cat-back exhausts are intended for owners that want to be heard; with no mufflers, these straight piped systems are aggressive, allowing your engine to be fully experienced. The R&D design started with a stainless steel flange precision TIG welded to 2.5 in. tubes leading into a CNC-bent and CNC-machined X pipe, offering a large cross-sectional area which allowed a merge the left and right banks to improve sound without restricting the exhaust flow. Each system is supported by a Stillen branded cross brace supporting and accentuating the exhaust system, then finished with polished stainless, burnt stainless steel, or carbon fiber exhaust tips. Stillen Competition Series exhaust systems offer all the benefits of an engineered, dyno tested, and performance designed exhaust system at a low cost with a more aggressive tone than a system featuring mufflers. Select the system designed for your vehicle with the tip finish preferred.

Not Yet Reviewed

$1,081.50

—

$1,210.25

aFe Rebel XD Series Exhaust Systems

Designed for diesel pickups, aFe Rebel XD Series exhaust systems perform as well as they look. Made with mandrel-bent stainless steel tubing to improve exhaust flow for more horsepower, torque, and lower EGTs (exhaust gas temperatures), Rebel XDs are MIG-welded for durability and include high-quality hardware to provide a quick, hassle-free installation. Finished with dual polished or black stainless steel tips with intercooling vents, they are the perfect combination of performance, value and style. Key features of aFe Rebel XD Series exhaust systems: * DPF-back (diesel particulate filter) and downpipe-back styles * Stainless steel construction for endurance * Smooth transition bends for low turbulence and lower EGTs * Mufflers use a straight-through perforated core with heat-resistant packing to reduce backpressure and maximize flow * Intercooled tips reduce EGTs at the tailpipe * Tips badged with laser-cut, riveted-on aFe logo plates * OE-style bayonet hangers stabilize pipe location * Bayonet tips hold hanger bushings in place for an OE-style fit * OE mounting locations used for hassle-free installation * High-quality band clamps for leak-free 360 degree sealing * Some cutting may be required on some cab configurations Note: Some aFe Rebel XD Series exhaust systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.

Not Yet Reviewed

$796.00

—

$911.00

Yoshimura Race Series R-77D Exhaust Systems

If you're looking for a competitive edge on the track, the Yoshimura Race Series R-77D exhaust systems may be your ticket to the winner's circle. They're designed with nothing but power in mind. Each system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide. Yoshimura's R-77D full system is a dual-outlet version of the race-proven R-77. The carbon fiber muffler requires no inserts or restrictions, increasing packing life and providing five percent more open exhaust outlet area—with as much as three decibels lower sound output (compared to the standard open R-77). It offers greater gains in low- and mid-range power. Order the system designed for your motorcycle application. Additional features: * Superbike technology and styling * Innovative dual-outlet carbon fiber end-cap * Trapezoidal-shaped sleeve * Large volume of packing material * Straight baffle for ample flow * Stainless steel header and tailpipe (Note: Not intended for street use; for closed-course competition only)

Not Yet Reviewed

$1,449.00

On Sale

Dinan Free Flow Stainless Exhaust Systems

Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.

4.0 out of 5 stars ( 4 )

$2,561.95

$732.50

—

$2,459.95

Skunk2 Racing Mega Power Exhaust Systems

Skunk2 Racing's Mega Power exhaust systems are designed to optimize engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment, as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a polished tip with its own acid etched Mega Power badge and serialized nameplate. A removable silencer and all necessary hardware is also included. The Skunk2 Racing Mega Power exhaust systems offer top-notch performance, better build-quality and the ultimate sound. Order the exhaust system designed for your application needs.

Not Yet Reviewed

$845.45

FMF Racing Fatty Pipes

Broaden your power band with FMF Racing Fatty pipes. These popular Gold Series pipes broaden and smooth out the power curve, while boosting gains throughout the entire power band for more low-end, mid, and overrev. Fatty pipes are built from carbon steel with a nickel plated finish for maximum durability, and their Tru-Flo stamping process ensures a perfect fit and optimum performance. With more tractable power and improved throttle control, FMF Racing Fatty pipes deliver the race-proven performance you're looking for, no matter what type of riding you do.

4.0 out of 5 stars ( 4 )

$260.99

—

$512.99

American Racing Headers Late Model Ford Mustang Headers

American Racing Headers late model Ford Mustang headers are available for a wide variety of Mustang engines and models; every set provides a serious bump in horsepower and torque. Select headers come with an X-pipe standard, if you prefer a more classic muscle-car sound, swap the X-pipe for an optional H-pipe. Either choice provides a low-rasp, drone-free driving experience. ARH Direct Connect kits for Mustangs are designed to work with original equipment cat-back systems without any cutting or welding. For Corsa cat-back exhaust systems, check out ARH's Direct Connect kit specifically made to work with Corsa cat-backs. ARH Mustang headers with Bottleneck Eliminator kits do away with the 2.25 in. restriction at the cat-back connection point of some OE 5.0L systems. They are specially built to fit aftermarket cat-back systems; a simple mark and cut (no welding required) mates the ARH Bottleneck Eliminator to your cat-back. ARH long system headers for 2012-14 Boss Mustangs even allow you to keep the Boss side pipes. Additional features of American Racing Headers late model Ford Mustang headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

Not Yet Reviewed

$2,139.72

On Sale

APR Cat-Back Exhaust Systems

APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty

Not Yet Reviewed

$2,766.95

$1,126.95

—

$3,899.95

Yoshimura Race Series R-77 Exhaust Systems

Yoshimura Race Series R-77 exhaust systems are designed with the needs of the racer in mind! These full systems are constructed from lightweight materials and deliver a significant boost in power. The high-flow trapezoidal shape muffler gives your bike a great sound without being excessively loud. Order the model recommended for your bike application. Race Series exhausts offer the competitive edge you seek en route to the winner's circle. Additional details: * Superbike technology and styling * Large volume of packing material * Straight baffle for ample flow * Innovative end-cap * Removable low-volume insert * Stainless steel header and tailpipe * For closed course competition; not intended for street use

Not Yet Reviewed

$1,279.00

—

$1,449.00

Yoshimura Signature Series RS-5 Exhaust Systems

Yoshimura Signature Series RS-5 exhaust systems offer a trapezoidal shape that appeals to the eye and really captures the spirit of racing. They feature a straight baffle with a removable low-volume insert and are significantly lighter than your stock configuration. Installation is a breeze with everything necessary included! Order the model recommended for your quad or bike application.

Not Yet Reviewed

$819.00

Gibson Elite Black Series Single Exhaust Systems

Gibson Elite Black Series single exhaust systems dominate with performance, sound, and style. These high performing stainless steel cat-back Elite setups offer unique style with their complementing premium black ceramic coated 4 in. tips that provide a fabulous stealth appearance. For performance, Gibson single side-exiting exhausts feature mandrel-bent 3 in. tubing that gives extra low-end power and torque, perfect for improved acceleration, maximum hill climbing, towing, and passing power. And for sound, the systems are fitted with baffled and chambered mufflers with no internal packing for minimal interior drone and an aggressive tone. Gibson Elite Black Series single exhaust systems deliver power, looks, and a quieter cab.

Not Yet Reviewed

$613.99

—

$699.99

Vance & Hines Shortshots Staggered Exhaust Systems

Available in either chrome or black, Vance & Hines Shortshots staggered exhaust systems deliver top- quality full systems for less than you would pay for most slip-ons. With 1 3/4 in. headpipes stepped to 2 1/8 in. muffler bodies and 2 1/2 in. 220 degree coverage heat shields, dollar for dollar, these are unbeatable systems. Plus, the Vance & Hines Shortshots staggered exhaust systems deliver a higher level of performance and sound.

5.0 out of 5 stars ( 1 )

$769.95

—

$1,099.95

Vance & Hines Bigshot Staggered Exhaust Systems

Look and sound as formidable as you can! With Vance & Hines Bigshot staggered exhaust systems, you can maintain the intimidating look of a 2-into-2 system, while achieving the performance advantages that come with a 2-into-1 race system. These apex-predators feature a proprietary power chamber design, which uses the volume of both mufflers to increase horsepower and torque. The Vance & Hines Bigshot staggered exhaust systems also feature an aggressive sound and offer removable baffles. Your mounting hardware and instructions are also included.

Not Yet Reviewed

$1,099.95

Vance & Hines Big Radius Exhaust Systems

Vance & Hines is going to change the way you look at 2-into-1 exhaust systems. Their Big Radius exhaust systems break the mold, delivering white-knuckle performance with a style that has won over the motorcycle aftermarket. Incorporating blue-proof technology across the entire length of the pipe, Big Radius exhaust systems will keep their showroom finish, whether at the drag strip or on the streets. Plus, these systems also include mounts for factory O2 sensors. Designed and produced in the USA, Vance & Hines Big Radius exhaust systems are as beautiful as they are functional.

Not Yet Reviewed

$1,429.95