Availability
Showing In Stock Items. Show All 60 Items.
MBRP intermediate exhaust pipes will keep the flow movin'! These pipes are constructed from heavy-duty aluminized steel, with smooth bends for the best flow and lasting service. Plus, you'll gain extra power and EGT reduction. Increase the power and efficiency of your diesel with MBRP intermediate exhaust pipes.
( 11 )
$104.99
—
$239.99
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 321 )
$232.95
—
$267.95
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$199.95
Summit Racing™ offers header bolts for a variety of engine applications, from 1955 and up. These stainless steel fasteners have small 3/8 in. hex heads for use with a box end wrench and a 9/16 in. head flange that eliminates the need for washers. For rebuild, restoration, or swap, replacement bolts from Summit Racing™ will properly secure your header.
( 14 )
$12.99
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$224.99
—
$269.99
On Sale
Summit Racing offers exhaust flanges in a variety of 2- and 3-bolt pattern sizes and shapes. The 3/8 in. thick flanges are available in steel or stainless steel—and are designed to ensure an accurate, leak-proof seal for your exhaust components. Order the model that fits your pipe diameter and other fitment specs.
( 94 )
$28.99
$26.09
Custom exhaust has never been easier than with Walker universal tailpipes. These tailpipes feature smooth bends and are available in a variety of shapes, lengths, and diameters to fit your needs. It doesn't matter if your car or truck is a custom build, or you just want the exhaust to exit in a different place, Walker has you covered with their universal tailpipes.
( 8 )
$61.99
—
$71.99
Summit Bucks
Dynomax tailpipes are mandrel bent and perfect as replacement pieces. They are also ideal if you are putting together a custom exhaust system for your vehicle. Offered in universal and application-specific versions. When it comes to your exhaust, there is no better choice than these Dynomax tailpipes!
( 33 )
$49.99
—
$224.99
Apollo GT Series muffler delete pipes are constructed of mandrel-bent 409 stainless steel tubing for maximum strength and durability. Utilizing state-of-the-art computer-aided design technology, these muffler deletes are designed for custom, high-tolerance factory fitment. The free-flowing tubing replaces the stock muffler producing a deeper, more powerful sound.
( 45 )
$143.85
—
$152.25
On Sale
MBRP XP Series muffler bypass pipes are built with rugged 16-gauge T409 stainless steel, so you can count on them to withstand anything and everything from salt and tar to rocks. Available for universal and vehicle-specific applications, the pipes are easy to install. MBRP XP Series muffler bypass pipes are rugged, unrestricting, and are ready to enhance your vehicle's horsepower and sound with long-lasting performance.
( 15 )
$124.99
$99.99
—
$104.99
Better than stock, Pacific Performance Engineering exhaust downpipes increase flow and performance on your Duramax. PPE crafts them with smooth bends from long-lasting 304 stainless steel. They include titanium exhaust wrap and clamps for a secure installation. Remove your crushed oval-shaped stock downpipe and replace it with a Pacific Performance exhaust downpipe for unrestricted power! Order the model recommended for your application.
( 26 )
$134.99
—
$170.99
MBRP offers exhaust tailpipes in a variety of configurations, materials, and finishes. They are designed to maximize exhaust flow, sound, and performance. The tailpipes are built for fitment on specific applications. Order the model recommended for your vehicle.
( 6 )
$104.99
OER exhaust manifold heat riser valves warm up your cold engine. These original equipment reproductions hasten the warming of your engine to prevent the loss of power and exhaust manifold damage. Replace malfunctioning or frozen valves--fit OER exhaust manifold heat riser valves between your exhaust manifold and headpipe for quicker engine warmups.
( 13 )
$74.99
On Sale
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$199.95
—
$376.95
These intermediate pipe kits from Flowmaster include a combination of S-bend pipes in pairs of different sized outlets. They allow the skilled do-it-yourselfer to fabricate the intermediate pipes of a dual exhaust system.
( 40 )
$231.95
Complete your dual exhaust system and gain horsepower at the same time with these Pypes downpipes. They are designed to connect to your factory manifolds and terminate at the transmission crossmember (some applications will require trimming for length). These downpipes are made from mandrel-bent stainless steel tubing for unrestricted flow and long-lasting performance. They include hardware and flanges, unless otherwise noted.
( 235 )
$201.79
—
$202.79
Walker exhaust pipe connectors are designed to connect two exhaust pipes of the same inside or outside diameter to make exhaust installation easier. These pipe connectors are available in a range of different styles and sizes to accommodate your exhaust system needs. They are manufactured from premium material to provide greater durability, and an optimal OE-style fit. If you are looking for premium exhaust system hardware and accessories manufactured with great attention to detail, make Walker is your #1 choice.
( 120 )
$6.99
—
$16.99
Let MBRP Black Series downpipes assist you with your quest for power! Every enthusiast is looking for more power, and during your search, you've possibly overlooked the restrictive factory downpipe on your rig. Mount MBRP downpipes between your factory turbo and exhaust system for a deeper sound, lower EGTs, and quicker throttle response. These Black Series pipes are crafted from 16-gauge, mandrel-bent steel for maximum flow; and they're coated with an extremely durable, high-temperature black ceramic finish for the hottest looks and performance in town. Your search is over—MBRP can make your desire for power a reality with their Black Series turbo downpipes.
( 16 )
$224.99
—
$494.99
BRExhaust direct-fit Y-pipes are engineered to meet OE specs, ensuring performance, reliability, and a precise factory-like fit. Their direct-fit design also allows for easy installation. BRExhaust exhaust pipes feature durable, corrosion-resistant aluminized steel construction and are mandrel-bent to enhance overall exhaust flow performance. Choose the Y-pipe designed for your vehicle.
( 2 )
$119.99
—
$282.99
Walker pre-bent intermediate pipes are manufactured and designed for durability with precision benders. The then fixture checked to ensure a precise fit for quick and easy installation. Hundreds of configurations are available for most domestic and import applications from the 1950s and up. Select the size, material, and other options recommended for your vehicle.
( 319 )
$14.99
—
$164.99
Heavy-duty downpipes for your heavy-duty truck! Flowmaster Chevy/GMC 6.5L truck turbo diesel downpipe kits feature thick-walled aluminized pipes, clamps/hangers, brackets, instructions, decals, and a warranty card all in one box.
( 14 )
$249.95
Upgrade your factory exhaust feed system with BD Diesel turbo up pipes. These durable replacements are manufactured from stainless steel and they can maximize your turbo response time, as well as eliminate leaks. Smooth mandrel bends and less restrictive, internally shielded expansion bellows (which reduce the chance of burnout) also maximize exhaust energy to drive the turbocharger. Increase exhaust performance with the more efficient, longer lasting BD Diesel turbo up pipes.
( 3 )
$592.95
JBA Performance Exhaust downpipes offer mandrel-bent, stainless steel construction for maximum flow and performance. They will increase your torque and horsepower significantly over your stock downpipes.
( 1 )
$335.25
These Walker exhaust flanges are just what you need to fix that leaking OEM exhaust. They are made from steel and come in a variety of pipe sizes.
( 64 )
$7.99
—
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
