Availability
Showing In Stock Items. Show All 32 Items.
Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!
( 638 )
$370.99
—
$577.99
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$1,000.00
—
$1,413.00
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$1,049.95
$700.95
—
$1,049.95
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 29 )
$619.79
—
$913.79
$579.79
—
$873.79
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 303 )
$899.95
—
$1,229.95
$808.95
—
$1,105.95
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,149.95
$1,033.95
—
$1,199.95
Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors
( 5 )
$1,379.00
—
$2,849.00
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$315.95
$232.95
—
$284.35
On Sale
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 23 )
$514.79
—
$827.79
$474.79
—
$787.79
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$972.90
—
$1,325.70
Complete your dual exhaust system and gain horsepower at the same time with these Pypes downpipes. They are designed to connect to your factory manifolds and terminate at the transmission crossmember (some applications will require trimming for length). These downpipes are made from mandrel-bent stainless steel tubing for unrestricted flow and long-lasting performance. They include hardware and flanges, unless otherwise noted.
( 238 )
$163.79
—
$186.79
On Sale
Flowmaster pipe kits are just like the Flowmaster exhaust systems except they don't include mufflers. This allows more flexibility in choosing the right sound for your vehicle while still providing the convenience of a pre-bent exhaust system.
( 20 )
$549.95
$493.95
On Sale
Pypes High Tuck header/crossmember-back exhaust systems allow for the most ground clearance of any A-body system on the market. The X-pipe pushes the mufflers up into their installation pockets and the tailpipe sits higher coming out of the muffler. No more bottoming out! Pypes High Tuck header/crossmember-back exhaust systems are designed to boost your car's performance to the next level—you will get more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions. Their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
Not Yet Reviewed
$753.79
—
$806.79
$713.79
—
$766.79
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$727.30
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 933 )
$1,410.99
MagnaFlow Competition Series exhaust systems are designed for those seeking maximum performance, reduced mass, and an aggressive exhaust note that demands attention. They feature all mandrel-bent tubing and 409 stainless steel construction. These kits are available in numerous configurations, including cat-back and rear axle-back styles; single or dual mufflers; and one, two, or four outlets. Many tip options are offered, as well. MagnaFlow Competition Series exhausts increase your horsepower and torque for better results on the track, and they carry a lifetime construction warranty. (The systems may not comply with all local or federal noise requirements.) Order the sizes and setup tailored for fitment on your specific make and model.
( 28 )
$1,346.10
On Sale
These intermediate pipe kits from Flowmaster include a combination of S-bend pipes in pairs of different sized outlets. They allow the skilled do-it-yourselfer to fabricate the intermediate pipes of a dual exhaust system.
Not Yet Reviewed
$549.95
$493.95
JBA Performance Exhaust Evol exhaust systems are tuned and precision-built for each application, so you get a perfect fit and optimized performance every time. They are offered in both bright 409 stainless steel with 304 stainless steel tips and high-quality aluminized steel. The mufflers feature an efficient high-flow design and fully welded cases for long-lasting performance. These Evol exhaust systems increase horsepower and torque throughout the rpm range, improve fuel economy and throttle response, and produce a powerful exhaust tone and enhanced vehicle appearance. Get the power and the sound that you're looking for with the JBA Performance Exhaust Evol exhaust systems!
( 36 )
$817.65
—
$1,004.20
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$940.55
—
$1,100.25
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$445.99
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 64 )
$1,785.27
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,458.25
—
$1,860.10
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$1,536.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
