Availability
Showing In Stock Items. Show All 36 Items.
Improved Racing's engine block oil galley barbell plugs feature a second O-ring that completely seals off the dirty oil from the clean oil, forcing 100 percent of the flow through the filter. Sharp corners were avoided and machined as smooth fillets to improve oil flow, while the bull nose tip helps smooth oil flow to the oil filter. The shaft diameter is smaller than the OEM plastic barbell to minimize flow restriction, and the threaded hole allows for easy removal with any 4mm x 0.7 threaded screw. Please refer to the Applications tab when ordering to confirm the fitment. Features of Improved Racing's barbell plugs include: * Direct replacement for plastic OEM barbell plug * Precision CNC-machined from billet 6061-T6 aluminum * Viton® rubber O-rings offer high-temperature resistance and excellent chemical compatibility with engine oils
( 17 )
$26.90
Summit Racing™ LS Rear main seal housings are the correct housings for all LS models. These aluminum housings are ideal for replacing damaged housings and building a new project from scratch. Summit Racing™ LS rear main seal housings are designed for a correct fit and quality performance.
( 17 )
$50.99
DOD delete blind sealing plugs are used in GM Gen IV and V V8 engine blocks that will not be using Active Fuel Management (AFM), Displacement On Demand (DOD), or the AFM/DOD lifters. To close the oil flow passages in the block and prevent a significant internal oil leak causing low oil pressure, Lingenfelter Performance Engineering DOD delete blind sealing plugs are essential. Made from high-quality M8 alloy aluminum they are built to be reliable and last.
( 17 )
$22.75
Need to cover up your oil cooler outlet? ICT Billet offers an ideal solution with their oil cooler port delete plates. These aerospace-grade billet aluminum delete plates come complete with a reusable O-ring seal and stainless bolts.
( 40 )
$23.99
Replace a worn out or old rear oil passage plug with Moroso oil galley barbell plugs. Your vehicle's old plug could be allowing dirty engine oil to bypass the oil filter. Moroso's improved design features a secondary O-ring to seal dirty oil from flowing to the engine bearings. These dog bones also have a smaller shaft diameter than the OEM piece to minimize any flow restriction. Moroso's oil galley diverters are machined from billet aluminum, not plastic like the original OE piece, and are supplied with quality, high-temperature rated Viton® O-rings to withstand all types of engine oils and compression cycles. Whether you call them passage plugs, dog bones, or barbells, these Moroso components can be easily removed from the engine block once installed with its 4mm threaded hole.
( 4 )
$23.99
From the leader in performance cooling, Derale oil galley bypass plugs for Gen III and IV LS engines helps improve flow, oil pressure, and completely block dirty engine oil from bypassing the filter with a triple O-ring design. A direct replacement for the plastic OEM barbell plug, they are made from 6061 T-6 billet aluminum and black anodized. Derale plugs have three preinstalled Viton® O-rings and threaded #6-32 holes for easy installation.
( 4 )
$21.49
Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.
( 6 )
$24.99
—
$25.99
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 15 )
$41.99
ICT Billet bellhousing dowel pins are steel alignment pins offered in two lengths—factory and longer than factory. Made from mild steel, ICT pins fit between engine and transmission.
( 6 )
$22.99
ICT Billet camshaft thrust retainer plate bolts are high-quality replacements for your stock fasteners. If you're doing an engine rebuild, cam swap project, or maybe misplaced your stock bolts—why not upgrade with a premium set of camshaft thrust retainer plate fasteners from ICT Billet?
( 3 )
$25.99
ARP rear motor cover fasteners are designed to attach the rear motor cover on your Chevrolet LS series engines. They are available in your choice of steel or stainless steel, and with either hex or 12-point fastener head styles.
( 3 )
$20.99
—
$39.99
These Pioneer performance freeze plugs are designed by engine rebuilders, for engine rebuilders. Several types of freeze plugs are offered in a choice of materials and sizes for a large variety of applications.
( 41 )
$21.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 163 )
$23.99
When rebuilding your Ford engine, you'll want to use the proper plugs and dowels for the job. These Ford Performance Parts Plug and Dowel kits include the necessary dowels, cup plugs, and pipe plugs for your rebuild.
( 8 )
$39.99
—
$47.99
Melling engine expansion plug kits come with everything needed to replace the leaky "freeze" plugs on your current engine. When you have the motor out of the chassis, it's the ideal time to update the plugs before they start leaking. Order the kit recommended for your application—and stay ahead of the game with Melling!
( 12 )
$23.99
—
$31.99
COMP Cams have put together their engine plug kits because they understand it's easy to forget the little things. Ordering this one part number will supply you with all the plugs needed to seal the water and oil chambers in your LS engine. The plugs are made from brass and galvanized steel to resist corrosion, and will last for years without rusting or becoming stuck in your engine block. When building an LS engine, your primary focus is the major components—camshafts, cylinder heads, and like power makers. You don't want to overlooked the smaller, but also important, parts to complete your build. COMP Cams hasn't; pick up one of these engine plug kits and be ready to finish what you've started.
( 2 )
$49.95
Cummins by Mopar bellhousing dowel pins make perfect alignment possible. These pins will provide the right fit and function, so the install of your bellhousing will go easier. When working with your diesel build, Mopar offers all the parts—even the small ones—to make your job a success.
Not Yet Reviewed
$56.99
PRW Main Cap Side Bolts uses premium grade Custom 4135 Steel rated at "aircraft" quality. Their side bolts are then specially heat-treated to 180,000 psi. This heat-treating procedure allows for total heat penetration which results in a stronger, more superior stud compared to lesser quality studs from other manufacturers. PRW main cap side bolts are then centerless ground after being heat treated and then thread rolled which assures better fatigue strength than having this process done before heat treatment. This manufacturing process may cost more to do but the results are well worth the extra effort.
Not Yet Reviewed
$25.98
Chevrolet Performance oil cooler delete plates are designed to cover the oil cooler outlet. They're made from aluminum and are available for a variety of specific vehicle and/or engine applications.
( 11 )
$25.99
Philadelphia Racing Products oil diverter barbells are simple but effective. They replicate stock galley barbells, however the PRP components are made from solid 6061 aircraft-grade billet aluminum, precision machined, and fitted with an O-ring seal for leak-free performance.
( 4 )
$22.79
Whether you're looking for more power or simply trying to refresh the motor, there will come a time when you'll need Summit Racing Equipment® LS engine hardware kits. These kits include brass freeze plugs and main cap side bolts for your LS engines. Your rebuilt engine will not be complete without Summit Racing Equipment® LS engine hardware kits.
( 2 )
$57.78
Mr. Gasket brass freeze plug kits eliminate any chance of rusted-out engine expansion plugs. Though they're designed for marine applications, these kits are ideal for long-term stored vehicles, as well as for everyday street use. The plugs guard your engine against freeze damage and cracks when there is insufficient antifreeze protection. Each kit includes all of the plugs needed for a complete (and specific) engine block—for applications from 1955 and up.
Not Yet Reviewed
$31.46
The engine tear down and cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Dura-Bond offers many of the hard-to-find OEM service parts you need. All hardware is manufactured to precise OEM dimensions for exact fit.
( 73 )
$38.99
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$44.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
