Availability
Showing In Stock Items. Show All 15 Items.
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 387 )
$109.99
—
$253.99
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 15 )
$149.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$109.99
Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.
( 2 )
$102.36
—
$204.74
Make sure your crankshaft is secured properly using a set of these Summit Racing™ main bolt kits. They include high-tensile strength bolts that deliver maximum reliability where you need it the most. The bolt kits are designed for use with stock or aftermarket main caps, and can be installed without any modifications.
( 10 )
$179.70
Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.
Not Yet Reviewed
$172.88
—
$185.86
Billet Specialties LS valley covers are engineered to fit LS2, LS3, LS7, and LSX blocks when using a carbureted intake manifold. They feature a ribbed design and are precision-machined from 6061 T6 aluminum and polished to a mirror finish to match other ribbed accessories. The covers include high-quality ARP 12-point hardware for the perfect finishing detail. The valley covers feature a provision machined into the back for the factory breather box and two 1/8 in. NPT ports for use with external breathers, oil separators, or catch cans. Designed for use with an OEM factory gasket (not included).
Not Yet Reviewed
$218.95
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$210.84
—
$265.34
Why use ARP main cap studs for your motorcycle or UTV? They're machined from 8740 chromoly steel, heat-treated to 190,000 psi tensile strength, and precision J-form thread-rolled to create fasteners with the strongest threads available. The studs eliminate main cap walk and fretting—and offer the ability to obtain more accurate torque readings, easier engine assembly, and the proper alignment of caps. Order the set recommended for your powersports machine!
Not Yet Reviewed
$183.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$250.95
Top Street Performance trussed-style engine valley covers will add some flair in an unlikely place under your hood. These billet aluminum valley pan covers are lightweight—and available in a choice of black or chrome finish. Hardware is included for an easy installation. Order the trussed-style engine valley cover that's designed to fit your year/make and engine application.
Not Yet Reviewed
$165.42
—
$204.94
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$224.99
HardDrive cylinders are offered as a stock replacement as well as increased displacement (depends upon application) for applications as early as Panhead all the way up to Evolution and Sportster. All cylinders must be finish honed and matched to pistons (sold separately).
Not Yet Reviewed
$221.36
These Wiseco cylinder sleeves are designed to re-sleeve your worn or seized cylinders. They are an economical solution available for riders, racers, and engine builders everywhere. The centrifugal castings used in these sleeves are manufactured from the highest quality materials ensuring ease of installation, trouble-free boring, and a dependable, long-lasting engine. The CNC machining holds exacting tolerances and are precision ground diameters greatly reduce installation time.
Not Yet Reviewed
$134.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
