Availability
Showing In Stock Items. Show All 27 Items.
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 388 )
$102.99
—
$253.99
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 15 )
$149.99
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.
( 2 )
$102.36
—
$204.74
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$214.99
Make sure your crankshaft is secured properly using a set of these Summit Racing™ main bolt kits. They include high-tensile strength bolts that deliver maximum reliability where you need it the most. The bolt kits are designed for use with stock or aftermarket main caps, and can be installed without any modifications.
( 10 )
$209.70
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$210.84
—
$221.09
ARP Pro Series main bolts are application-specific and rated at 190,000 psi. Designed for use in competition engines, as well as to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 14 )
$126.99
Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.
( 8 )
$126.99
Stef's rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, one-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation.
( 2 )
$128.99
Why use ARP main cap studs for your motorcycle or UTV? They're machined from 8740 chromoly steel, heat-treated to 190,000 psi tensile strength, and precision J-form thread-rolled to create fasteners with the strongest threads available. The studs eliminate main cap walk and fretting—and offer the ability to obtain more accurate torque readings, easier engine assembly, and the proper alignment of caps. Order the set recommended for your powersports machine!
Not Yet Reviewed
$183.99
Moroso rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, 1-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation. The adapter kits include all mounting fasteners and required hardware.
( 8 )
$249.99
Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.
Not Yet Reviewed
$185.86
PRW billet steel main girdles help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main stud girdles are manufactured from premium quality 1045 billet steel, and include high-quality PRW fasteners and hardware. Select the girdle designed for your vehicle's engine.
( 2 )
$240.17
—
$252.72
Canton Racing SBC rear main seal adapters convert your 1986 and later blocks with one-piece rear main seals to accept an older style 2-piece seal crankshaft. These adapters are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. When using these adapters, an oil pan for a 1985 and earlier block with a right side dipstick must be used. They are made from billet aluminum and hardware is included.
Not Yet Reviewed
$225.00
World Products main caps are precision CNC-machined from superior-quality 1050 billet steel or ductile iron and are proudly 100 percent manufactured in the USA. The main caps are designed to provide maximum stability, strength, and balance. Front and rear caps are also available. Use these caps together for the ultimate in bottom-end stress and flex management.
Not Yet Reviewed
$112.98
Summit Bucks
Top Street Performance trussed-style engine valley covers will add some flair in an unlikely place under your hood. These billet aluminum valley pan covers are lightweight—and available in a choice of black or chrome finish. Hardware is included for an easy installation. Order the trussed-style engine valley cover that's designed to fit your year/make and engine application.
Not Yet Reviewed
$204.94
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$109.95
—
$182.95
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$224.99
Milodon premium-grade bolts are forged from 8740 chromoly steel. They are ground and thread-rolled after heat-treatment to ensure exacting tolerances. These bolts feature a 1/2 in. hex head for greater socket clearance, a wide flange area under the head for greater load spread, and a black oxide finish.
Not Yet Reviewed
$204.95
HardDrive cylinders are offered as a stock replacement as well as increased displacement (depends upon application) for applications as early as Panhead all the way up to Evolution and Sportster. All cylinders must be finish honed and matched to pistons (sold separately).
Not Yet Reviewed
$221.36
These Wiseco cylinder sleeves are designed to re-sleeve your worn or seized cylinders. They are an economical solution available for riders, racers, and engine builders everywhere. The centrifugal castings used in these sleeves are manufactured from the highest quality materials ensuring ease of installation, trouble-free boring, and a dependable, long-lasting engine. The CNC machining holds exacting tolerances and are precision ground diameters greatly reduce installation time.
Not Yet Reviewed
$134.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
