Availability
Showing In Stock Items. Show All 153 Items.
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 315 )
$35.99
—
$54.99
Our Summit Racing™ oil filter adapters include a oil bypass valve and come complete with mounting bolts. The oil filter adapters fit Chevrolet V8 engines from 1968-86.
( 141 )
$39.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 54 )
$20.99
—
$22.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$23.99
Holley offers oil dipstick and tube kits for GM LS engines that are direct-fit assemblies for their LS retrofit oil pans. Each of these kits include the braided steel dipstick and black powdercoated steel tube built from the same high-quality materials as the OEM units. The oil dipstick and tube kits for GM LS engines provide both pieces together for one price to complement their oil pans.
( 35 )
$52.49
Don't waste time installing a generic oil pump when you can get a high-quality Summit Racing™ pump that's ready to go. The high volume pumps deliver 20-25 percent more oil than the standard volume pumps, and are pressure-tested and hand-turned to guarantee performance. Available in iron and nodular iron for most applications.
( 184 )
$42.99
—
$51.99
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 968 )
$50.99
These spin-on oil filter mounts come without the high-pressure bypass valve found on stock filter mounts, ensuring that all oil travels through your filter before entering your engine. These black anodized mounts come complete with an O-ring seal and self-locking hardware.
( 29 )
$45.99
If your original spin-on filter adapter mounts are made out of cheap alloy, replace them with Summit Racing™ mounts. Get the benefits of a solid piece of aluminum holding your filter. They have a durable, hard-anodized finish and are designed to eliminate the filter bypass port, allowing for 100 percent complete filtration. These filter mounts include hardware and an O-ring seal for ease of installation.
( 19 )
$39.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable Chrome or Black Powdercoated finish for good corrosion protection and long life. Get yours today.
( 183 )
$41.99
—
$44.99
ARP performance oil pan bolt kits are just what the doctor ordered to cure leakage. They are available in black-oxide finished chromoly or polished stainless steel. Take your pick from conventional hex or compact 12-point style heads and give your oil pan a great seal.
( 171 )
$23.99
—
$59.99
Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. For high performance bolt-on oil pump screen applications, Melling offers additional oil pump screen support with these engine oil pump pickup tube support brackets. The lightweight billet aluminum brackets provide added support for holding the oil pump screen in place during extreme high performance engine operation. Order the replacement model recommended for your vehicle.
( 14 )
$22.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$27.99
—
$32.99
Chevrolet Performance factory replacement dipstick tubes are designed for use with your production GM engine block and aftermarket Chevrolet Performance Parts oil pan. They're manufactured from durable materials and install easily with no modifications. The dipstick tubes are available in more than a dozen configurations for vehicles from the 1960s and up. Order the model recommended for your application.
( 95 )
$27.99
—
$39.99
Summit Bucks
ACDelco GM Genuine Parts engine oil sump windage trays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. These crankshaft oil deflectors are available for a variety of vehicles, including many Chevrolet and Pontiac applications. Order the replacement model recommended for your ride.
( 1 )
$41.99
Chevrolet Performance factory replacement dipsticks offer an easy upgrade when your original becomes loose, bent, or otherwise dysfunctional. These steel engine oil dipsticks are available in a variety of finishes—and for countless application-specific vehicles.
( 51 )
$23.99
—
$31.99
Finish your engine dress up the easy way with Ford Performance Parts engine oil dipsticks and tubes. They are made from triple chrome plated steel, and are available with your choice of a standard, curved, or blue anodized knurled handle. Some of these oil dipsticks and tubes are similar in design to OEM units. Either way, they'll not only increase the beauty of your engine, but will add a new dimension to your entire vehicle.
( 48 )
$40.99
—
$50.99
Our oil pump pickups are specially matched to our Summit Racing™ oil pans. Welded from high quality steel with performance screens, these pickups help keep your motor bathed with a healthy supply of oil. Keep your engine well-oiled for optimal performance with our oil pan pickups.
( 123 )
$21.99
—
$51.99
CVR billet aluminum spin-on filter mounts are designed to eliminate the filter bypass port, allowing for 100 percent complete filtration. These filter mounts have a durable, hard-anodized finish and include an O-ring seal and hardware for ease of installation.
( 11 )
$52.99
Canton Racing oil pan stud kits will make the installation of your oil pan easier. These stainless steel kits hold the gasket in place while you're installing the pan, and will also help with pan alignment.
( 82 )
$22.00
Summit Bucks
ACDelco GM Genuine Parts oil pump pickups are designed, engineered, and tested to rigorous standards and backed by General Motors. These replacement pickups are true OE parts, delivering the correct fit along with predictable performance. They're available in different styles for hundreds of applications from the 1990s and up. Maintain your GM vehicle with genuine factory parts from ACDelco.
( 5 )
$50.99
—
$54.99
Oil pan bolts are frequently stripped when removing and replacing the oil pan; or they become corroded by the elements weakening the bolts. ICT Billet oil pan bolt sets are available for a variety of applications. Designed to be used with factory equipment, they are direct OEM replacements.
( 4 )
$25.99
ICT Billet LS oil pump and oil pickup bolt kits will fit GM LS Series engines. These heavy-duty bolts are clear zinc coated steel (Grade 10.9) with JIS-style heads. The zinc coating provides long-lasting corrosion protection and helps prevent the threads from seizing. Finish off your LS oil pump installation with billet flange bolts for pump and pickup tube pipe screen mount from ICT Billet.
( 4 )
$25.99
Canton Racing provides oil pump pickup studs for those early-style engines that were not equipped with a main cap stud to support the pickup. These steel studs with a black oxide finish will meet your early-style engine application needs or replace your existing application.
( 18 )
$38.00
—
$45.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
