Availability
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 344 )
$54.99
—
$190.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$35.99
—
$247.99
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$131.99
—
$450.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$11.99
—
$24.99
If you are serious about building the ultimate wet sump system, then these Melling one-piece billet aluminum oil pumps with their integral screen pickup are the only way to go. These pumps not only eliminate the potential disaster of the oil pump pickup falling off, but they also offer smoother oil flow with less internal drag, resulting in an actual increase of 5 to 6 hp. Melling Select billet aluminum oil pumps will fit in your existing Moroso, Milodon, and Stef's wet sump pans, there is no need to buy a new pan or to modify your old one. Melling Select billet aluminum oil pumps offer the absolute latest in cutting-edge technology. Additional features include: * Billet aluminum housing and cover with anodized hardcoat * Standard or high volume billet spur gears * Multiple pressure settings * Chromoly driveshaft extended into the pump cover for support * Integral pickup screen assembly with stainless steel wire mesh * Robust CNC-manufactured design * Chromoly intermediate shaft, optional pressure relief springs, and instructions
( 2 )
$452.99
—
$666.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 188 )
$95.99
—
$187.99
Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.
( 176 )
$7.99
—
$62.99
Melling oil pump screen assemblies are designed for use with your Melling oil pump. These replacement pickups have a built-in filter screen and are engineered to fit the stock pan and specs—and, in some cases, Street/Strip and Circle Track applications. Various installation methods are available, including bolt-in, press fit, and screw-in. Melling offers nearly 200 models; select the assembly tailored for fitment with your specific vehicle or engine.
( 368 )
$10.99
—
$42.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 163 )
$8.99
—
$30.99
Restore your engine to its true power potential with Melling's stock replacement cam and lifter kits. They're perfect for either replacement or stock rebuilds. Melling cam and liter kits also include a matched set of lifters so you won't have to worry about mismatched parts during installation.
( 20 )
$269.99
—
$572.99
These Melling M-Select Torque cam and lifter kits are designed for the perfect upgrade of your stock camshaft. They will provide a smooth idle, good low-end torque, and excellent pulling power. The Melling M-Select Torque cam and lifter kits include a matched set of Topline lifters to complete the installation. Rebuilding or upgrading your engine? Try one of these Melling M-Select Torque cam and lifter kits for maximum reliability.
( 23 )
$296.99
—
$332.99
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$122.99
—
$372.99
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 73 )
$2.99
—
$16.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$31.99
—
$397.99
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$9.99
—
$19.99
Melling spin-on oil filter adapters convert the oil filter landing on the engine block to an oil passage. They are made for use with a remote cooler and/or a remote filter.
( 21 )
$19.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$7.99
—
$23.99
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$4.99
—
$17.99
Melling M-Select Class 2 camshafts are perfect for any ride. They have good idle quality, low-rpm torque, and mid-range performance. These cams will work with stock or slightly modified engines with manual or automatic transmissions. Order the model designed for fitment on your vehicle.
( 24 )
$121.99
—
$343.99
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$116.99
—
$309.99
Melling oil pump rebuild kits include everything that you need for a quality rebuild to keep your Melling oil pump properly operating. When it comes time to service your oil pump, you can count on Melling having the correct components for a job done right.
( 38 )
$27.99
—
$124.99
Melling is more than pumps. Their timing gears provide strength with less friction. These precision gears are manufactured from quality materials that meet or exceed OE specifications for your vehicle. Stage your timing with a perfect timing gears--Melling timing gears.
( 7 )
$84.99
—
$105.99
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$3.99
—
$18.99
Melling mechanical flat tappet lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit, and they are affordable, too.
( 3 )
$4.99
—
$41.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
