Availability
Showing In Stock Items. Show All 119 Items.
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 68 )
$96.99
—
$649.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$32.99
—
$255.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$20.99
—
$240.99
Wiseco pulled out all of the stops with their Professional Series piston kits. These pistons accommodate the reluctor ring on stroker cranks without having to notch the pin bosses. Offset pins like OE and skirt shapes are specifically designed for street applications, making these the best piston kits available. Successfully tested in the highest horsepower applications, the Professional Series kits also utilize ArmorGlide skirt coating—which is the result of testing, development, and benchmarking through Wiseco's in-house dyno program. The outcome is minimized friction, maximized horsepower, and improved wear resistance. Not only is ArmorGlide a high-tech lubricant that reduces friction, but it also allows the piston to be fitted tighter within the bore than a non-coated piston. Anti-detonation and pressure seal grooves give you a better ring seal, reducing noise from the piston rock and delivering better performance. Order the pistons tailored for your application.
( 15 )
$150.99
—
$1,098.99
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 331 )
$218.99
—
$389.99
Diamond Pistons Competition Series pistons are for those looking to take their engine to a whole new level of power. These forged aluminum pistons are superior in strength and provide extra protection during the high-stresses of high-compression, forced induction, or nitrous. Diamond Pistons Competition Series features: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
( 1 )
$78.00
—
$1,109.94
D.S.S. Racing SX-Series forged pistons are the perfect find in your hunt for horsepower! Why? They're American-made, high-quality, lighter than stock, and value-priced! D.S.S. SX forged pistons offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons are more than capable of getting your engine blower, turbo, and nitrous ready! Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons.
( 7 )
$559.95
—
$599.95
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 67 )
$186.99
—
$341.99
D.S.S. Racing SX-Series forged pistons and rings are the perfect find in your hunt for horsepower! Why? They're high-quality, lighter than stock, and value-priced! D.S.S. SX forged piston and ring kits offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons and rings are more than capable of getting your engine blower, turbo, and nitrous ready! Kit includes a DSS DM piston ring set featuring ductile moly steel top rings and flex vent oil rings. Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons and rings.
( 4 )
$714.95
—
$754.95
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 20 )
$638.68
—
$1,036.84
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 4 )
$744.73
—
$1,022.15
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$23.99
—
$211.99
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$1,589.70
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$834.95
—
$904.95
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$1,279.94
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$864.95
—
$934.95
JE Pistons sport compact pistons are specifically engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Their dome/dish requires no deburring or preparation and features smooth-flowing radii for excellent flame travel. A pin fitting, wire locks, and rings are included.
Not Yet Reviewed
$299.99
—
$1,349.99
D.S.S. E Series forged pistons are fully forged and machined from a 4032 alloy material with precision-honed piston pin bores and include heavy-duty piston pins. The pistons are full-floating or press-fit compatible and use double true arc pin locks, forged oil drainbacks, double valve notches, and diamond turned piston skirts. Get high-quality pistons at a great price--try a set of D.S.S. E Series forged pistons today!
( 59 )
$449.95
You don't need a king's ransom to rule the track. ICON premium forged piston and ring kits deliver high performance racing pistons crafted from high-strength 2618 primary aluminum alloy and matched with performance rings, creating remarkable value-packed kits. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple wound spiral lock rings, and their proprietary diamond-finished skirts. Heavy-duty ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! ICON premium forged pistons and ring kits will help you reign victorious without spending a lot of cash.
( 18 )
$531.99
—
$1,109.99
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
—
$1,114.95
ICON Premium forged pistons are designed to be application specific and are made from either 4032 or 2618 aluminum. 2618 aluminum has a lower silicon content and is better suited for engine combinations with high compression or a power adder, they also offer an increased rate of thermal expansion. ICON Premium forged anodized piston and ring kits include all the features of an FHR piston, with the addition of an anodized top ring groove and crown, precision CNC-machined valve reliefs and crown features, pressure fed pin bore oiling, and skirt and pin boss struts for increased strength and durability. ICON Premium forged piston and ring kits include pistons and ring stack. Select the kit designed for your build. Additional features: * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons
Not Yet Reviewed
$504.99
—
$872.99
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$545.99
—
$1,009.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$669.95
—
$719.95
ICON pistons have introduced a new forging line: the FHR (Forged Head Relief) Series. This new line features VMS 75 alloy, true arc-style lock rings, broached pinholes, breakthrough oil returns, and 5/64 in. ring packs—all designed to be easy on your wallet! In addition, most flat-top and dish applications are available in an offset pin design, which will help to quiet those street motors. The included piston rings will seal mild to high-compression engines, help to protect against oil blowby, and feature standard ring end gap for an easy installation.
( 3 )
$490.99
—
$517.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
