Availability
Standard Motor T-Series oil pressure warning light sending units are designed to meet the original equipment form, fit, and function. Don't take chances with old, questionable, or faulty OE parts that can leave you stranded. Replace them with new ones from Standard Motor Products.
( 2 )
$2.99
—
$22.99
Sierra Marine drain plugs are available in magnetic and non-magnetic styles. They provide a direct-fit for missing OE plugs and will keep fluids in and contaminants out. For everything marine, big and small components, Sierra Marine will help you repair and maintain your boat.
Not Yet Reviewed
$4.99
—
$560.99
Sierra Marine drain taps are designed and manufactured for low-pressure applications. Made to the highest quality standards, they provide a leak-proof, metal-to-metal seal with hand tightening.
( 2 )
$16.99
Rein Automotive intake manifold adjusting units are made to factory specifications ensuring proper fit, form, and function. They adjust intake runner length to optimize the vehicle's performance throughout the entire rpm range by adjusting airflow to the engine. Rein Automotive intake manifold adjusting units aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component. Order the unit model designed for fitment on your vehicle.
Not Yet Reviewed
$112.99
—
$229.99
With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, Fram Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard filters are the perfect filter for everyday drivers who perform frequent maintenance on their vehicles Features include: * Engineered for conventional motor oil * Cellulose and glass blended media provides protection for up to 5,000 miles * 95 percent filtration efficiency * Internally lubricated sealing gasket for easier filter removal * Precision-molded nitrile anti-drainback valve for start-up engine protection * Coil spring with glass fiber reinforced nylon poppet relief valve * Sure Grip coating provides a non-slip finish for easier installation and removal
( 132 )
$6.99
—
$49.99
Turbosmart oil pressure regulators provide oil pressure regulation for your ball bearing turbocharger. Oil management is an important part of ensuring the longer life of a turbo. Turbosmart OPR T40 regulators help prevent compressor or turbine stage oil leaking and smoking, as well as taking the guesswork out of oil restrictor sizing for more efficient and effective oil delivery. These patent pending units ensures the oil pressure going to the turbocharger never exceeds the maximum pressure turbocharger manufacturers specify for oil supply, regardless of engine oil pressure. The result is an oil delivery system that is more reliable and easier to setup than a standard restrictor system.
( 8 )
$133.27
—
$157.95
On Sale
Holley offers oil dipstick and tube kits for GM LS engines that are direct-fit assemblies for their LS retrofit oil pans. Each of these kits include the braided steel dipstick and black powdercoated steel tube built from the same high-quality materials as the OEM units. The oil dipstick and tube kits for GM LS engines provide both pieces together for one price to complement their oil pans.
( 35 )
$52.49
$47.25
Moroso PCV air/oil separators will help increase your engine's performance. These air/oil separators will capture excess oil and keep it out of your intake tract so that your engine will breathe cleaner intake air--better air equals better performance. Moroso offers universal and custom fit versions in small and large body sizes. The large bodies, besides having more capacity, feature a bottom drain with an elbow that makes draining the collected oil virtually mess-free. Their polished billet aluminum bodies can be chromed, painted, or powdercoated. The small units offer a 2-piece body that unscrews for draining and are available raw or with polished or anodized finishes.
( 328 )
$201.99
—
$514.99
Peterson Fluid Systems Drag Race dry sump oil tanks add race-proven design and performance to your vehicle. These units have been verified by Kurt and Warren Johnson to provide excellent oil control with absolutely no blowing oil. They are offered with integrated catch can or breather fittings for use with an external breather can. Peterson Fluid Systems Drag Race oil tanks feature: * All-aluminum construction * Lightweight billet aluminum cap and rings * Built using high-quality spinnings * Hand TIG-welded and pressure tested * Fully baffled inside for oil and air control * Heater bung for immersion-style heater * Optional NHRA approved breather can
( 1 )
$934.99
—
$1,496.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 231 )
$20.99
—
$1,798.99
Milodon oil pump driveshafts are CNC-machined from 4130 chromoly and are centerless-ground to avoid stress risers. These race-proven shafts eclipse breakage-prone stock units that frequently fail when used with high-volume oil systems, heavy racing oil, or high-rpm applications. The ends are induction heat-treated to reduce wear.
( 42 )
$24.95
—
$219.95
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
( 1 )
$832.99
—
$2,999.99
Canton Racing Accusump electric pressure control valve kits are available for discharge/refill in different psi ranges to suit your needs. These valves have the convenience of an electric valve for remote-mounted units and the rapid refill rate of a manual valve as required in racing. The electric pressure control valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level, and only refills when the pressure rises above that level. Each kit comes with a regulator, electric valve, wire, toggle switch, pipe nipple, terminals, and instructions.
( 9 )
$324.00
ARP has designed these extra heavy-duty oil pump driveshaft kits to provide you with the reliability you need. Made from heat-treated chromoly steel, they are larger in diameter than the OEM unit. This enables the ARP shafts to handle the added torque requirements of increased oil pump capacity or heavy-viscosity lubricants. Rated at 220,000 psi, ARP oil pump driveshafts are ready to do the job.
( 248 )
$15.99
—
$23.99
K&N offers oil catch cans for a variety of cars and trucks from the early 2000s and up. These air oil separators protect the engine and intake tract from blowby by capturing the oil in K&N's industry-leading high-capacity reservoir. This also helps prevent power loss. The separators are easy to install in about 30 minutes with basic tools and use factory-style hose connections to quickly snap on and off. These units replace the factory line from the crank case, allowing the oil separator to be mounted to a convenient location in your engine bay. No tools are needed to check and empty the oil collector reservoir. Order the model recommended for your vehicle. Product details: * Designed to protect the engine from oil contamination due to blowby * Helps protect against power loss and premature detonation * Engineered to reduce build-up of oil and contaminants in your intake tract * Premium OEM-style connectors and robust hoses * Large 6 oz. capacity reservoir; no tools needed to check and empty * Direct-fit to application (vehicle-specific)
( 18 )
$121.57
—
$157.99
Improved Racing offers performance aluminum windage trays for a variety of LS family engine applications. They are direct bolt-on replacements for the factory trays that clear up to a 4 in. stroke and work with both factory studs and ARP studs. These windage trays are 100 percent bolt-on compatible with factory LS oil pans. No need to grind, modify, or add spacers to your windage tray—and no more oil starvation issues due to misaligned pickup tubes. Just bolt on the new unit and everything will line up like factory! Improved Racing designed these windage trays to maximize oil drainage while optimizing windage control. Made from aluminum, they weigh less than half as much as the steel factory tray for a weight savings of approximately 1.4 lbs. Order the model recommended for your vehicle. Features and benefits: * Clears all factory and aftermarket rods and crankshafts up to a 4 in. stroke * Compatible with many common LS oil pans, no modifications required * Optimized to improve oil scavenging and windage control * Works with factory and ARP studs * More than 50 percent lighter than stock windage tray * Lifetime Warranty Includes: * Aluminum performance windage tray * Locking flange nuts for factory studs (for ARP studs, use nuts provided by ARP) * Reducing bushings for use with factory studs * Installation instructions
( 3 )
$149.00
Bostech high-pressure oil pumps are available for Cummins, Duramax, and Powerstoke diesels to ensure your stock or built engine receives proper lubrication. These remanufactured oil pumps are direct fit bolt-on units that include gaskets, seals, and other hardware for proper installation. Built diesel engines are prone to oil starvation of internal parts and the turbocharger, so you need all the oil you can get to protect your valuable investment. Order the model recommended for your application.
Not Yet Reviewed
$479.95
—
$1,295.95
Peterson Fluid Systems oil tanks are the leader in tank technology. They're manufactured using aircraft-quality components—and internal baffling provides excellent deaeration of the scavenge oil, while maintaining a tall column of oil over the pickup. These oil tanks disassemble easily, and the tank tops can rotate in relation to the bottoms for ease in fitting placement. The units are available in different capacities, with one or two inlets, and male or female threads. (Heater bungs are sold separately.)
Not Yet Reviewed
$672.99
—
$1,289.99
Relocate your oil filter to a more convenient location with a remote oil filter mount with thermostat from Improved Racing. Built-in thermostat allows for quicker warm-up times and prevents the oil cooler from over-cooling the engine during street driving. These units are machined from 6061-T6 billet aluminum and feature a black anodized finish. They are very useful in high performance vehicles where, quick, easy access to the oil filter is desired.
( 1 )
$299.00
Finish your engine dress up the easy way with Ford Performance Parts engine oil dipsticks and tubes. They are made from triple chrome plated steel, and are available with your choice of a standard, curved, or blue anodized knurled handle. Some of these oil dipsticks and tubes are similar in design to OEM units. Either way, they'll not only increase the beauty of your engine, but will add a new dimension to your entire vehicle.
( 48 )
$39.99
—
$47.99
Peterson Fluid Systems adjustable vacuum pump regulators are on the leading edge of engine management. Through extensive testing, they've been proven to regulate crankcase vacuum and hold a steady level. Vacuum can be regulated from as high as 29.7 in./hg. down to 2 in./hg. The units include a -12 AN port and an aluminum weld bung for the valve cover.
( 1 )
$217.99
Don't let your engine suffer from oil starvation. These Chevrolet Performance oil pump pickups are high-quality units and are designed for a variety of applications. Keep your engine correctly lubricated with these Chevrolet Performance oil pump pickups.
( 10 )
$18.99
—
$122.99
On Sale
Holley Gen III Hemi oil dipstick and tube kits are built from the same quality materials as the OEM units and offer a direct fit with specific Holley cast oil pans. The kits include a flexible braided steel dipstick with black powdercoated tube and installation is easy.
( 3 )
$49.95
$44.95
Milodon Vac-U-Pan systems are a highly effective method of achieving optimum power through significantly reducing oil pressures. The breather of the units attaches to the valve cover and the probe is inserted into the header. Exhaust scavenging pulls pressure and blowby out of the motor. These complete kits include breathers, check valves, and weld-in nipples.
( 16 )
$80.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
