Engine Rotating Assemblies & Rebuild Kits

Namura Technologies Top-End Repair Kits

Top-end rebuilds can help to improve the performance of your ride, and Namura Technologies top-end repair kits will keep your ATV, UTV, or off-road motorcycle running in peak condition! They include everything you need: pistons, top-end gasket kit, and wrist pin bearings (where applicable) in one convenient, time-saving package. Namura kits are available for a wide variety of makes and models, with specific bore and compression ratio parts to service your specific vehicle. Choose to do your rebuild with repair kits from Namura Technologies—the people who make pistons with attitude!

5.0 out of 5 stars ( 2 )

$37.50

—

$286.99

Cylinder Works Standard Bore Cylinder Kits

Eliminate the wait with Cylinder Works standard bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These cylinders look virtually identical to your OEM parts. Cylinder Works standard bore cylinder kits come in model-specific kits, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required

4.5 out of 5 stars ( 2 )

$438.72

—

$705.46

Cylinder Works Big Bore Cylinder Kits

Eliminate the wait with Cylinder Works big bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These Cylinder Works cylinders look virtually identical to your OEM parts and are conveniently available in "stealthy" big bore sizes. Cylinder Works big bore cylinder kits come in a variety of sizes, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required

Not Yet Reviewed

$512.66

—

$767.69

Summit Bucks

S&S Cycle 124 in. Big Bore Kits

Inspired by S&S Pro Stock drag race engines, S&S Cycle 124 in. big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 124 in. big bore kits are available in wrinkle black or wrinkle black with highlighted finned cylinders. Transform your stock engine into a 124 in. monster with the installation of a 124 in. big bore kit from S&S Cycle! S&S Cycle 124 in. big bore kit features: * Available for 107 M8 models * 107 to 124 in. big bore kit * Bolt-on kit * Includes gaskets and hardware required for installation * 4.250 in. bore * Forged Pistons * 11:1 compression ratio

Not Yet Reviewed

$1,561.95

—

$1,643.95

Summit Bucks

S&S Cycle 128 in. Power Packages with Gear Drive Cam

S&S Cycle offers 128 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Gear drive kits provide improved cam timing accuracy and eliminate stock chain tensioner * Gear drive kits include outer drive gears VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars

Not Yet Reviewed

$3,427.95

—

$3,460.95

Summit Bucks

S&S Cycle 128 in. Big Bore Kits

The S&S Cycle 128 in. big bore kits are for Harley-Davidson® Milwaukee Eight engines to allow you to upgrade your M8 motor to the largest bore size possible—and without required machining of your cases. So ... go big or go home! These upgrade kits are as simple as big power gets! S&S Cycle 128 in. big bore kit features: * 114 in. to 128 in. big bore kit * Bolt-on kit, the largest cylinder bore possible without requiring machining of the crankcases * Cylinders are constructed from premium aluminum castings wit cast-in iron liners * Wrinkle black finish in highlighted and non-highlighted fin versions * Easy installation; no need to bore or split existing cases—just swap the cylinders! * 4.250 in. bore, 4.500 in. stroke * Forged pistons * 11:1 compression ratio * All necessary gaskets and hardware required for installation included

Not Yet Reviewed

$1,403.96

—

$1,643.95

Summit Bucks

S&S Cycle 124 in. Big Bore/Stroker Hot Set-Up Kits

The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.

Not Yet Reviewed

$7,104.95

Summit Bucks

S&S Cycle 128 in. Power Packages with Chain Drive Cam

S&S Cycle offers 128 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Available in both chain drive and gear drive variations VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars CAM CHAIN TENSIONER: * Precision-machined from billet aluminum * Thicker shoe for longer wear * Direct chain oiling * Larger piston for more consistent pressure * Tighter tolerances improve stability

Not Yet Reviewed

$3,265.95

Summit Bucks

S&S Cycle 106 in. Big Bore Kits

S&S Cycle 106 in. big bore kits will increase the displacement of 95 in. engines to 106 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 106 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 106 in. in. Big Bore kits: * The 106 in. big bore kits yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 3/8 in. stroke, 106 in. displacement, and 10:1 compression ratio with stock heads (9.7:1 compression ratio with S&S 89cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Even though stock cylinders can be bored to fit the 3.927 in. pistons, the included S&S cylinders feature a much stronger liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders * Kits include cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,282.95

—

$1,313.95

Summit Bucks

S&S Cycle 106 in. Big Bore Hot Set-Up Kits

S&S Cycle 106 in. Big Bore Hot Set-Up cylinder kits are easy to install. No machining or rebalancing is required, and the engine does not need to be removed from the chassis. With these kits, the resulting 106 in. engine has a compression ratio of 10:1, is stock height (no frame clearance problems), and a stock EFI throttle body will fit. Kits include: * 3.927 in. bore pistons, rings, wrist pins * Big bore cylinders finished in wrinkle black powder coat * 585C chain drive Easy Start camshafts * Chromoly steel adjustable pushrods * High performance tappets * Gaskets

Not Yet Reviewed

$2,143.95

Summit Bucks

S&S Cycle 80 in. Shovelhead Top End Kits

Replace that worn out top end with S&S Cycle complete 80 in. top-end replacement kits for Big Twins with band-style heads. They include everything needed to totally replace the top end of your tired Shovelhead engine. The cylinder heads feature high-flowing ports and .590 in. lift capacity for improved performance and easy high-lift camshaft installation, while a moderate 8:1 compression ratio will allow your engine to run well on readily available premium pump gas. S&S Cycle 80 in. top-end kits contain S&S 3 1/2 in. bore high-tensile cast iron cylinders, 3 1/2 in. bore forged pistons, Super Stock cylinder heads, and all the gaskets and hardware necessary.

Not Yet Reviewed

$3,659.95

Summit Bucks

S&S Cycle 865cc Big Bore Kits

S&S Cycle 865cc Big Bore kits are ideal for Royal Enfield 650 Twins. Designed for closed course racing competition, the kits include pistons, rings, pins, and sleeves. The high compression pistons feature a 7cc raised dome to achieve a compression ratio of 11:1 (from 9.5:1). Higher compression is a key factor in increasing performance.

Not Yet Reviewed

$849.95

Summit Bucks

S&S Cycle 74 in. Stock Bore Cylinder Kits

The S&S Cycle 74 inch stock bore cylinder kits are intended to replace worn cylinders and pistons of a 74 in. Shovelhead engine for a Harley-Davidson® motorcycle and keep stock compression ratio of 8:1. The primary purpose of these S&S Cycle stock bore cylinder kits is to maintain the original "74 cubic inch" displacement of older Harley-Davidson® engines, essentially allowing for a rebuild, while also keeping the engine size the same without increasing the bore size beyond the standard dimensions for a 74 cubic inch engine.

Not Yet Reviewed

$1,995.95

Vertex Race Piston Kits

Vertex Race piston kits consist of piston, rings, wrist pin, and circlips. These pistons are made from the highest quality 2618 aluminum alloy and are perfectly suited to handle the rigors and high pressures of today's modern four-stroke engines. Plus, to aid in the break-in process and reduce wear, every Vertex piston utilizes a unique Molybdenum Disulphide (MOS2) coating on the piston skirt. What truly sets Vertex pistons apart from the competition are the unique piston profiles and compression ratios that are offered in A, B, C, and D sizes. This variation in sizing allows the piston to be perfectly sized to the cylinder for maximizing power and performance, while reducing blow-by and oil consumption. Order the piston kit designed to fit your application needs.

Not Yet Reviewed

$156.70

Federal Mogul Premium Engine Rebuild Kits

These Summit/Federal Mogul Premium engine rebuild kits will make your performance rebuild easy and inexpensive. Everything you need is in one affordable package. They're available with or without pistons (cast, hypereutectic, or forged, depending on the application), chromoly faced compression rings, and exclusive SS-50 oil control rings, as well as main, cam, and rod bearings. Various oil pump configurations are available, depending on the applications, along with top-quality gaskets and freeze plugs.

4.2 out of 5 stars ( 5 )

$522.84