Cylinder Heads, Head Bolts & More

AFR 335cc Enforcer BBC Cylinder Heads

AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.

4.13 out of 5 stars ( 8 )

$935.00

Trick Flow® PowerPort® 240 Cylinder Heads for Big Block Mopar

Once you see Trick Flow® PowerPort® 240 heads for big block Mopar in action, you'll agree they are the only aftermarket aluminum heads worth using on your engine! What makes PowerPort® 240 heads so great? For starters, they're made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers then fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. Fully profiled combustion chambers and CNC Street Ported runners guarantee proper dimensional accuracy and balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 240 heads over stock heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10 degree steel valve stem locks. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 240 heads to accomodate all factory-style big block Mopar pistons. They are also manufactured to accept aftermarket roller rocker arms, intake manifolds, and headers. They are available fully assembled or as bare castings. Sold individually.

4.88 out of 5 stars ( 32 )

$1,149.99

—

$1,649.99

Trick Flow® PowerPort® 175 Cylinder Heads for Ford 390-428

Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.

4.89 out of 5 stars ( 9 )

$1,099.99

—

$1,574.99

Trick Flow® DHC™ 175 Cylinder Heads for Small Block Chevrolet

No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.

4.81 out of 5 stars ( 21 )

$924.99

—

$949.99

Trick Flow® PowerPort® 190 Cylinder Heads for Small Block Mopar

Trick Flow® PowerPort® 190 cylinder heads for small block Mopar engines are made from A356-T61 aluminum because it's much lighter but every bit as strong as cast iron. The intake runners have been enhanced to increase airflow, and both intake and exhaust runners feature Trick Flow's® special CNC Street Ported treatment that combines premium-quality CNC machining with a standard resolution finish that's perfect for making more power. That's not all! Newly designed rocker arm shaft mounting bosses are stronger than the OE design, and larger diameter pushrod holes have been incorporated to accommodate 3/8 in. pushrods for use with flat tappet and hydraulic roller camshafts. Bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seats further increase performance and durability. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow by PAC Racing® valve springs, steel valve stem locks—and have chromoly and titanium retainer options. The heads fit all non-emissions 318, 340, and 360 engines found in many Chrysler vehicles from 1967-2003. You read that right: these heads fit both LA and Magnum-series engines, giving builders a truly "best of both worlds" scenario. That means Magnum builders can use readily available LA engine parts such as intake manifolds and valve covers. PowerPort® 190 cylinder heads are available fully assembled or as bare castings; sold separately. Order the model recommended for your year/make and engine application.

4.69 out of 5 stars ( 16 )

$949.99

—

$1,449.99

Trick Flow® PowerPort® Cleveland 195 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Trick Flow PowerPort® Cleveland 195 cylinder heads feature runners based on the OEM Ford 2V design. The heads feature CNC Street Ported runners that are CNC-machined with a standard resolution surface finish—perfect for street and strip machines. The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 195 heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

4.68 out of 5 stars ( 25 )

$1,349.99

—

$1,424.99

Summit Racing™ Precision Cast Cylinder Head

Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!

4.05 out of 5 stars ( 20 )

$624.99

—

$1,999.99

Trick Flow® PowerPort® 270 Cylinder Heads for Big Block Mopar

Trick Flow® PowerPort® 270 Max Wedge-style cylinder heads will significantly improve the power of your big block Mopar right out of the box. How? Well for starters, PowerPort® 270 heads are made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. PowerPort® 270 heads also feature larger, raised Max Wedge-style intake runners that provide a straighter path to the valve for improved airflow. The runners are treated to Trick Flow's® signature high resolution CNC Competition Ported surface finish that guarantees proper dimensional accuracy with balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 270 heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10-degree steel valve stem locks. They are available fully assembled or as bare castings. Sold individually. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 270 heads to use all factory-style big block Mopar pistons. They also are manufactured to accept aftermarket roller rocker arms, and headers. A Max Wedge-style intake manifold is recommended for best performance.

4.92 out of 5 stars ( 12 )

$1,249.99

—

$1,699.99

Trick Flow® DHC™ 200 Cylinder Heads for Small Block Chevrolet

Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.

5.0 out of 5 stars ( 2 )

$949.99

—

$1,299.99

Trick Flow® Twisted Wedge® 170 Cylinder Heads for Small Block Ford

Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.

4.85 out of 5 stars ( 27 )

$949.99

—

$974.99

Trick Flow® Twisted Wedge® Track Heat® 170 Cylinder Heads for Small Block Ford

Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.

4.5 out of 5 stars ( 14 )

$974.99

Trick Flow® Super 23® 215 Cylinder Heads for Small Block Chevrolet

Trick Flow® Super 23® 215 cylinder heads are a mainstay in the high-performance Chevy world. Based on the proven Super 23® head design, they're packed with power-building features like 215cc intake runners for strong mid- and high-RPM power, angled spark plugs, raised valve cover rails, and extra-thick walls for added durability. But progress never sleeps, so Trick Flow® developed an all-new Super 23® 215 cylinder head design that has a new and improved casting with a thicker 3/4" deck. Trick Flow® also added their top-of-the-line, CNC Competition Ported runner treatment with fully CNC-machined combustion chambers. This premium high-resolution surface finish delivers more airflow so that race-ready engines can reach even higher power numbers. You can get Super 23® 215 heads with one of two valve spring packages for different camshaft types and power levels. The standard 1.545" valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 1.550" valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 1 )

$1,054.99

—

$1,374.99

Brodix Cylinder Heads IK 215 Cylinder Heads for Small Block Chevy

Brodix offers IK 215 Series cylinder heads for small block Chevy 350 and 400 engine applications—focusing on the only two things that matter: performance and price! They include a revolutionary ultra casting, versatile intake ports designed for optimum versatility, and combustion chambers that allow the use of several types of fuel. Standard features are A-356 virgin aluminum alloy, phosphorous bronze valve guides, valve seats for use with unleaded fuel, ends milled and drilled for accessories, and a straight spark plug angle. These are the most affordable high-quality aluminum cylinder heads on the market. The hassle-free top-end combo kits include: * Complete cylinder heads * Intake manifold (4150 Series) * Valve covers * Headbolts and washers * Intake bolts and washers * Valve cover studs and nuts * Head gaskets * Intake gaskets * Exhaust gaskets * Carburetor gaskets * Valve cover gaskets * Spark plugs * Brodix hat IK Series 23-degree cylinder head details: * Standard valve cover pattern * 64 cc / 70 cc combustion chambers * Straight spark plugs * Ends milled and drilled for accessories * Ductile iron valve seats for use with unleaded fuel * CNC-ported combustion chambers available as large as 75 cc

Not Yet Reviewed

$3,330.99

Trick Flow® PowerPort® 325 Cylinder Heads for Ford 429/460

Trick Flow® PowerPort® 325 cylinder heads for Ford 429/460 engines deliver significant horsepower and torque gains over other similar-style cylinder heads. Notable features include an extremely efficient chamber design for more complete combustion and exhaust ports raised .270 in. from stock for increased airflow. Trick Flow® PowerPort® 325 heads also feature Trick Flow's® CNC Competition Ported runners and CNC-profiled combustion chambers. These premium high-resolution surface finishes are perfect for building maximum performance. Trick Flow® PowerPort® 325 cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 5 )

$1,849.99

Dart SHP Special High Performance Cylinder Heads

Dart SHP Special High Performance cylinder heads provide an affordable option for those who desire the weight savings of aluminum heads for a performance street engine. These units are manufactured from A356-T6 aluminum and are designed to work with most off-the-shelf components. SHP heads are available with your choice of 64cc or 72cc combustion chambers—and come in both 180cc and 200cc intake runner ports that are precision-cast to offer excellent flow and power without the need for CNC-machined porting. They feature optimized chambers for increased combustion efficiency, as well as multi-angle intake seats. The cylinder heads' radiused exhaust seats dramatically increase their performance, and the manganese bronze valve guides increase their life.

3.18 out of 5 stars ( 11 )

$599.99

Trick Flow® Super 23® 230 Cylinder Heads for Small Block Chevrolet

When it comes to high power 23 degree cylinder heads for small block Chevy engines, you can't do any better than Trick Flow Super 23® 230 heads. They are so good because they are the closest thing you can get to 18 degree cylinder head performance in a 23 degree design! Plus, the Super 23 230 heads use all standard small block valvetrain parts and headers saving you time and money when swapping heads. Super 23 230 heads come standard with Trick Flow's advanced CNC Competition Ported runner design that features fully CNC-profiled combustion chambers and runners with a premium high resolution surface finish for maximum flow and performance. Additional highlights include angled spark plugs, extra-thick decks and walls for porting, and raised valve cover rails. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

$1,474.99

EMPI Cylinder Heads

EMPI's selection of cylinder heads includes dual port GTV-2s and stock units for your air-cooled VW engine. GTV-2 dual port cylinder heads are available with different specs to out-class the competition. Each head offers aluminum alloy construction with beefed-up intake and exhaust ports to allow massive porting without the need for welding, and a 3-angle performance valve job. GTV-2 dual port heads are assembled with 40 x 35.5mm stainless steel Manley valves, single or dual Hi-Rev valve springs, chromoly retainers, hardened keepers, rocker, exhaust and intake studs. They have 12mm 3/4 in. spark plug holes. EMPI stock dual port heads are offered complete or "bare". Both have 14mm 1/2 in. spark plug holes, are SCORE-approved, and include rocker, exhaust, and intake studs. Complete heads also include 85.5mm bores assembled with 35.5 x 32mm OEM OSVAT stock valves, stock valve springs, steel retainers, and hardened keepers. Bare heads hardened seats and silicon bronze valve guides installed. Select the EMPI cylinder head needed for your engine.

Not Yet Reviewed

$281.75

—

$581.15

Edelbrock E-CNC 185 Cylinder Heads

Edelbrock E-CNC 185 cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved performance. Their all-new design delivers optimal airflow for maximum horsepower and torque in high performance street vehicles and small engine racing applications. The heads maintain the stock 23 degree valve angle and the intake flange is drilled to accept 1986 and earlier intake manifold designs. The CNC-machined ports give you a 64cc combustion chamber, a 185cc intake runner, and a 75cc exhaust port.

5.0 out of 5 stars ( 1 )

$1,431.50

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.2 out of 5 stars ( 173 )

$975.50

—

$1,595.50

AFR 210cc LS1 Enforcer Cylinder Heads

AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.

5.0 out of 5 stars ( 2 )

$513.00

—

$713.00

FLOTEK 180cc Small Block Ford Cylinder Heads

FLOTEK 180cc small block Ford cylinder heads feature as-cast ports, up to 0.550 in. lift, and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range. They come fully assembled and ready for a bolt-in installation; bare models are also available. Replace your stock heads with high performance FLOTEK 180cc small block Ford cylinder heads. Order the model recommended for your engine application. Additional notes: * This item is not sold as a pair; this is a single cylinder head * Available for 289, 302, and 351W engines * Will not accept stock pushrods * Thermactor plugs (EGR) not included (Trick Flow® small block Ford thermactor inserts recommended) * PAC, Manley, Comp Cam springs, and custom builds available

4.35 out of 5 stars ( 20 )

$349.00

—

$494.00

AFR 195cc SBC Enforcer Cylinder Heads

AFR 195cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one piece 8mm 21 4N stainless steel valves. The AFR 195cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.

4.95 out of 5 stars ( 22 )

$417.00

—

$643.00

Summit Racing™ 64cc Aluminum Cylinder Heads for Small Chevy

Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.

4.4 out of 5 stars ( 30 )

$1,329.99

Trick Flow® Twisted Wedge 11R® 227 Cylinder Heads for Small Block Ford

Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle

Not Yet Reviewed

$1,239.99

—

$1,549.99

Cylinder Heads, Valve Seats, Head Bolts, Top End Kits & More