Cylinder Heads, Head Bolts & More

Summit Racing™ 64cc Aluminum Cylinder Heads for Small Chevy

Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.

4.4 out of 5 stars ( 30 )

$1,329.99

Trick Flow® DHC™ 175 Cylinder Heads for Small Block Chevrolet

No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.

4.81 out of 5 stars ( 21 )

$649.99

—

$874.99

Trick Flow® DHC™ 200 Cylinder Heads for Small Block Chevrolet

Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.

5.0 out of 5 stars ( 1 )

$949.99

—

$1,274.99

Trick Flow® Super 23® 175 Cylinder Heads for Small Block Chevrolet

Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 1 )

$899.99

Edelbrock Performer RPM Pontiac CNC Cylinder Heads

Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.

5.0 out of 5 stars ( 2 )

$1,521.50

—

$1,560.50

AFR 230cc LSX Mongoose Strip Cylinder Heads

Recommended for aggressive street/strip builds with displacements up to 427 c.i. operating at or below 7200 rpm. Capable of flowing 328 cfm at 0.650 in. lift with a 4.000 in. bore size. AFR street legal 230cc LS1 Mongoose strip cylinder heads are specifically designed for Gen III Chevy Corvettes, Camaros, and trucks. LSX cylinder heads offer unmatched flow performance and feature 2.080 in. intake and 1.600 in. exhaust valves with their ductile iron interlocking valve seats. Mongoose strip heads are available with 62cc, 65cc, and 72cc combustion chambers. Structural features like AFR's trademark 3/4 in. thick head deck, a must for blown and nitrous applications, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. An exclusive new modern combination chamber design with a double quench pad area helps the LSX generate huge low and mid-lift airflow numbers.

4.71 out of 5 stars ( 7 )

$3,043.00

Edelbrock Ford Flathead Cylinder Heads

Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.

4.86 out of 5 stars ( 7 )

$987.50

—

$1,046.95

AFR 238cc LS3 Enforcer Cylinder Heads

AFR's 238 LS3 Enforcer cylinder heads feature its Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. They are the first Enforcer castings with 100 percent AFR design. With a smaller valve and port, these heads outflow your OE LS3 casting by up to 20 cfm at low lifts, offering greater performance potential. The budget-friendly heads are perfect for your OEM engine operating below 6300 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21-4N/21-8N stainless steel valves. They're available without any parts for DIY gearheads. Sold as a single piece; two are required per engine.

Not Yet Reviewed

$763.00

World Products Merlin Cylinder Heads

World Products Merlin cylinder heads for big Chevys combine large intake runners with open combustion chambers to produce good torque and low-end power. The heads are available assembled or bare; rectangular or oval; with or without intake/exhaust valves; and other options. Order the model that best suits your application.

2.71 out of 5 stars ( 7 )

$1,123.15

—

$2,624.42

Chevrolet Performance Bowtie Aluminum Cylinder Heads

Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates

Not Yet Reviewed

$1,685.52

Dart Iron Eagle S/S Cylinder Heads

These Dart Iron Eagle S/S cylinder heads are the perfect way to squeeze a little bit more performance out of your street engine. They are designed to offer many of the features of other high-end cylinder heads at a more affordable price. Dart produces these heads from premium, high-density cast iron with extra-thick decks for durability and power potential. These heads feature precision-cast 165cc intake ports and heart-shaped combustion chambers that are designed to produce great airflow without expensive or time-consuming porting. The hardened exhaust valve seats are fully compatible with unleaded fuels, and the multi-angle intake and radiused exhaust seats further improve flow, maximizing power. Dart utilizes screw-in rocker studs that won't pull out, even under heavy use, and the machined valve cover rails eliminate possible oil leaks. All you have to do is choose which combination of combustion chamber volume and valve size will best complement your engine, and whether you want fully assembled, bolt-on heads or bare, ready-to-build castings. Dart Iron Eagle S/S cylinder heads produce great throttle response and gains in low-to-midrange torque, just where you need it, for your street hot rod, musclecar, or pickup.

4.29 out of 5 stars ( 7 )

$426.46

—

$629.28

Engine Works Torque-to-Yield Head Bolts

Engine Works torque-to-yield (TTY) headbolts are specialized, single-use fasteners designed to stretch permanently beyond their elastic limit during installation, ensuring precise, consistent clamping force for modern engines. Unlike conventional bolts, they're tightened to a specific angle, not just torque, preventing head gasket failure. Kits are available for a variety of applications, including many Chevrolet engines from 1999 and up. Key details: * TTY bolts are designed to stretch plastically (permanently) into their "yield zone" to achieve optimal clamping force, meaning they cannot be reused * They're installed by tightening to a low torque value, followed by one or more 90-degree angle turns * Commonly used in modern aluminum engines with cast iron blocks (i.e. LS, Hemi, Coyote) to manage different thermal expansion rates * Advantages: Provide superior, consistent clamping load across the entire engine block, reducing the risk of head gasket failure in high performance or high-heat applications * Using specialized tools like a torque angle gauge is required for proper installation of these fasteners

Not Yet Reviewed

$57.46

—

$61.29

Edelbrock Victor Big Block Chrysler Cylinder Heads

These Edelbrock Victor big block Chrysler cylinder heads are designed for the serious race enthusiast. They are made of aluminum and feature raised intake and exhaust ports for improved flow characteristics. The heads will fit both tall and low-deck engine blocks using Victor intake manifolds. The raised valve cover rails get rid of any chance of leaking gaskets. Available with or without valves, these heads have reamed and semi-finished valve stem guides and no valve job. They require final guide sizing, valve seat finishing before installation, and special offset rocker arms for the intake side.

4.33 out of 5 stars ( 3 )

$1,041.50

Summit Bucks

S&S Cycle Head Bolt Kits

With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.

5.0 out of 5 stars ( 1 )

$142.95

—

$224.95

Summit Bucks

S&S Cycle Cylinder Studs

S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.

5.0 out of 5 stars ( 1 )

$99.95

HardDrive Rocker Cover Kits

Add some shine to your Harley®. Replace your tarnished or peeling rocker covers with HardDrive rocker cover kits. These chrome plated rocker covers for your Big Twins and Sportsters will put some bling on your bike.

Not Yet Reviewed

$321.26

Summit Bucks

S&S Cycle Super Stock Cylinder Head Kits

S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.

Not Yet Reviewed

$1,995.95

Kibblewhite Valve Guides

Refresh your ride with these Kibblewhite valve guides. These valve guides are designed to meet or exceed manufacturer's specifications for quality and are constructed from only the finest materials available for the job. Their tight tolerances and superior material mean that these valve guides will outperform and outlast their stock equivalents, making them perfect for stock or performance rebuilds. Don't trust your engine's health to lesser components--upgrade to these Kibblewhite valve guides for peace of mind after your next build.

5.0 out of 5 stars ( 4 )

$8.83

—

$34.40

Biker's Choice Rocker Boxes

Biker's Choice rocker boxes top your cylinders with the right fit, function, and value. They're made from quality materials and beautifully finished to add a bit of "curb appeal" to your motorcycle application.

Not Yet Reviewed

$738.16

Summit Bucks

S&S Cycle Cylinder Dowel Pins

S&S Cycle cylinder dowel pins help ensure proper alignment, which will ensure proper gasket sealing and leak-free performance. These steel pins are available in different sizes. Select the one(s) needed for your motorcycle.

Not Yet Reviewed

$16.95

Brodix Cylinder Heads IK 200 Cylinder Heads for Small Block Chevy

Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks

4.42 out of 5 stars ( 38 )

$1,387.99

—

$1,493.99

PROMAXX Performance Maxx Series Small Block Chevy Cylinder Heads

Maximum quality, maximum performance, and minimum pricing--PROMAXX Maxx Series SBC cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision CNC-machined, these small block Chevy heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you need for the street or strip. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. Get out-of-the-box performance that kicks up the power without emptying your wallet--PROMAXX Maxx Series SBC cylinder heads.

4.35 out of 5 stars ( 23 )

$1,193.00

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.23 out of 5 stars ( 169 )

$1,076.50

—

$1,119.50

VEGE Remanufactured Cylinder Heads

VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.

3.77 out of 5 stars ( 43 )

$1,101.99

Cylinder Heads, Valve Seats, Head Bolts, Top End Kits & More