Availability
Showing In Stock Items. Show All 64 Items.
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$229.99
$204.99
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$265.98
$240.98
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$551.82
—
$600.57
$540.97
—
$590.97
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$798.89
—
$901.89
$773.89
—
$876.89
On Sale
Standard Motor engine variable timing sprockets will restore your vehicle's drivability. Designed to match OE performance, these SMP units are precision-machined to ensure accurate variable valve timing and correct rough idle. And, once installed, the cam phasers can help to reduce emissions and improve vehicle efficiency. Choose quality parts to get the job done right the first time; choose Standard Motor engine variable timing sprockets.
( 8 )
$23.99
—
$775.99
$21.59
—
$698.39
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 43 )
$71.99
—
$110.95
$39.59
—
$61.95
On Sale
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 340 )
$297.95
—
$549.95
$238.36
—
$439.96
On Sale
Dress up the front of your engine with one of Mr. Gasket's chrome timing covers. They add the finishing touch under your hood and go great with your other chrome accessories.
( 3 )
$44.06
$28.64
On Sale
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$192.95
$106.95
On Sale
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 46 )
$288.95
$231.16
On Sale
COMP Cams Xtreme 4x4 camshafts are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 48 )
$549.95
$439.96
On Sale
COMP Cams FSL hydraulic roller camshafts offer drop-in convenience—with no valve spring changes or computer tuning required—for the LS3 engine family. The FSL cams provide proven 32 rwhp improvement without the risk of non-compliance with emissions regulations. COMP Cams FSL hydraulic roller camshafts work with stock components and a stock tune to produce an increase in peak power. Order the model designed for your vehicle/engine application.
( 1 )
$649.95
$519.96
On Sale
Standard Motor offers engine variable valve timing (VVT) oil control valves for a variety of applications, including many Chevrolet, GMC, and Cadillac vehicles. These direct-fit OE replacements effectively restore engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Anodized aluminum componentry limits sticking during sludge buildup to outlast any other aftermarket solenoid available. Premium O-rings and gaskets properly prevent premature oil leaks, where applicable. Each bolt-on unit undergoes extensive design process and 100 percent end-of-line testing to meet or exceed OE performance.
( 1 )
$38.99
$35.09
On Sale
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 60 )
$291.95
$233.56
On Sale
COMP Cams Magnum hydraulic roller camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod or show car with power accessories, or a super gas, super competition car on alcohol, one of these cams will fit your engine's needs.
( 17 )
$549.95
$439.96
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
COMP Cams Stage 1 LST Series hydraulic roller camshafts deliver "Low Shock Technology." These LST cams feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. From street durability to track power, COMP Cams Stage 1 LST Series hydraulic roller camshafts are an awesome choice for your build. The cams are available for a variety of engine, piston, and engine applications.
Not Yet Reviewed
$541.95
$433.56
On Sale
COMP Cams Xtreme RPM Series modular 4-valve camshafts have been designed to increase horsepower and extend the rpm range of your engine. From stock replacements to ultimate performance, there is an Xtreme RPM cam to meet your performance goals.
Not Yet Reviewed
$1,905.95
$1,524.76
On Sale
The Mr. Gasket Gold rocker arm nuts are designed to lock the rocker arms for precise valvetrain work. They include the thread locking fasteners and an Allen key to assist with the installation.
( 9 )
$73.79
$47.96
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$474.95
—
$704.95
$379.96
—
$563.96
On Sale
Achieve accurate timing and optimum performance for your vehicle's engine with Professional Products timing pointers. These universal timing pointers will fit all Ford FE V8 engines. They are intended to be used with the larger diameter 7.5 in. dampers, such as Professional Products models or the 427 FE high performance model. They are made of steel with a natural finish.
( 6 )
$9.99
$8.99
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,287.90
$1,237.90
On Sale
COMP Cams Evolution magnum hydraulic roller camshafts are high performance camshafts designed for your Harley-Davidson®. They are constructed from superior-quality materials to bring the best possible performance to your ride. If you're looking to upgrade your Harley®, COMP Cams Evolution magnum hydraulic roller camshafts are must-haves.
( 1 )
$205.95
$164.76
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
