Availability
Showing In Stock Items. Show All 22 Items.
Top off your timing chain installation the right way with a Proform chrome steel timing chain cover. They're made from heavy-gauge steel that's thicker than typical timing covers—greatly reducing the likelihood of leakage around the cover flange area caused by over-torqued fasteners. The steel timing chain covers are chrome plated for long-lasting beauty and include an oil seal. They are available in one- or 2-piece bolt-together models; the 2-piece models allow you to inspect the valvetrain while the engine is running. Order the cover recommended for your vehicle, engine, and water pump application.
( 6 )
$15.99
These precision Proform guideplates are carefully formed for an exact fit. Each guideplate has been heat-treated to increase hardness and minimize wear.
( 1 )
$15.99
Top off your timing chain installation the right way with one of these chrome timing chain covers. Engineered to GM standards, they are made from heavy gauge steel that is 20 percent thicker than typical timing covers, greatly reducing the likelihood of leakage around the timing cover flange area caused by fasteners being overtorqued. These covers bear the Chevrolet and Bowtie logos and are triple chrome plated for long lasting beauty. They will fit all engines with a bolt-on pointer and are supplied with a production GM oil seal already installed.
( 4 )
$20.99
Clearance
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 10 )
$25.04
—
$27.99
$19.50
aFe Pro GUARD HD oil filters deliver the increased flow and efficiency demanded in today's vehicles--gas or diesel. These direct OE replacements utilize a high performance synthetic media for maximum filtration with minimal flow restriction, and are offered in cartridge and canister styles to fit a variety of applications.
Not Yet Reviewed
$15.75
On Sale
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$15.95
—
$16.95
Jesel Valvetrain Innovation offers Pro Series tie-bar lifter link bars for a variety of Chevrolet big block engine applications. The offset hardware kit replacements are machined from factory materials and specs to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$10.22
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$10.99
—
$19.99
Howards Cams' Pro-Alloy is a specially developed low-stress, high-endurance material. Years of development, experience, and testing have gone into creating these Pro-Alloy mechanical roller valve springs. They have a low fatigue rate compared to most other roller springs on the market. These springs exceed H-11 Vasco-Jet specifications and are cycle-tested to 12 million cycles with no breakage.
( 1 )
$20.99
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, LT, and LS-based engine applications from the 1990s and up.
( 89 )
$19.99
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 138 )
$10.95
—
$14.95
These COMP Cams rocker arm shaft spacers are designed to allow the engine to rev higher and reduce the possibility of parts breakage. They are used on engines with adjustable rocker arms to improve valve tip alignment.
( 1 )
$17.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 29 )
$17.99
End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high performance kits and 190,000 psi Pro series kits.
( 277 )
$17.99
—
$20.99
Manley Street Flo valves are excellent-quality valves at an affordable price. All are made from stainless steel (intakes are NK-841; exhausts are XH-424) with chrome stems and hardened valve tips. Street Flo series valves are fully machined and swirl polished, and both the materials used and the heat-treating process are superior to those of the Budget replacement series valves. They're available in a variety of head diameters, with either straight stems or undercut "Pro Flo" stems for increased flow. Order the set that's compatible with your vehicle and engine application.
( 22 )
$16.55
—
$17.66
Manley LocCap valve locks are designed with high-revving track cars in mind. These valve locks are precision-machined using Manley's TensileMax ultra high-strength steel or high-quality titanium and are through-hardened to minimize wear. The internal retention groove is perfectly matched with Manley's LocCaps, giving you a perfect fit without fail. These valve locks are available for a variety of valve stem configurations. Whether you are racing all-out fuel cars, alcohol, or Pro Mods, you can count on these Manley LocCap valve locks to keep everything in place.
( 2 )
$20.07
Why settle for ordinary, when you could rock your ride with S&S Cycle rocker arm bushings! They are perfect for those who crave a risk-taking, bold approach to performance. So, when your engine is down and you're doing the top end, S&S Cycle rocker arm bushings are just what you need. They are far superior than the rest and will hang-in there—even when the going gets tough. Select the rocker arm bushings for your application needs.
Not Yet Reviewed
$13.46
Dart severe-duty stainless steel valves are designed to withstand the pressures of high-lift roller cams and feature a head design that promotes high flow. They are constructed of high-strength stainless steel that is backcut just enough for flow, without sacrificing strength. They feature swirl-polished heads with hard chrome stems.
( 14 )
$18.63
Trick Flow® adjustable pushrod length checker cup-style ends can be used to replace lost or damaged ends—or to convert a Trick Flow® ball end-style pushrod length checker to a measuring tool for engines that use cup-style pushrods. The ends are available to fit 5/16 in. and 3/8 in. diameter pushrods.
( 6 )
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
