Availability
Showing In Stock Items. Show All 81 Items.
Give your Mopar some much needed attention with Proform and their heavy gauge factory replacement timing chain cover. Having your choice of finishes, you're sure to put a smooth look to the front of your engine. It even comes with the factory crankshaft seal pre-installed.
( 19 )
$42.99
—
$52.95
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 136 )
$27.99
—
$54.99
Cloyes heavy-duty timing sets supply everything you need from a timing chain—performance and reliability. The cam sprockets are machined from cast iron with billet steel crank sprockets. Cloyes heavy-duty timing sets are available in single or double roller versions and offer .200 in. (for small blocks) or .222 in. (for big blocks) diameter double roller chains. Cloyes heavy-duty timing sets are considered the industry's most reliable workhorses. They're engine- or model-specific; order the set designed for your application.
( 293 )
$31.99
—
$52.99
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$22.95
—
$45.95
These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.
( 5 )
$22.95
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$20.95
—
$39.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$32.95
—
$44.95
Mahle Original offers a variety of high-quality valve lifters for fitment on vehicle and engine applications spanning several decades. These direct replacements will restore factory-type performance in opening cylinder valves.
Not Yet Reviewed
$23.99
—
$29.99
Cloyes replacement timing chain bushings fit the Cloyes Hex-A-Just timing sets. They are made of steel and use the special hex design manufactured by Cloyes to ensure accurate and reliable timing.
( 2 )
$24.99
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 19 )
$22.95
Summit Racing™ offers standard timing sets in a variety of styles, including link belt, roller and non-roller. Accurate timing and long life are among the many strong points of these timing chain and gear replacement assemblies. They're available for hundreds of model-specific and engine-specific applications. An iron cam gear and steel crank gear are included with each set.
( 64 )
$34.99
Dayco's long tradition of toothed belt power transmission systems and its in-depth knowledge of functional requirements, as well as its know-how in terms of quality, testing and reliability, are also now successfully applied to chain kits. In designing the new Dayco timing chain kits, a system logic was followed to ensure that all of the elements required for replacement—that is: the chain, hydraulic tensioner, sprockets, and guides—are included with every kit. Additionally, Dayco has guaranteed that all elements of each timing chain kit comply with the technical requirements of every single component. This provides maximum functionality, silence in operation, and promotes longer transmission life. The kits are available for countless vehicles; order the replacement timing chain recommended for your application. Advantages of the Dayco timing chain kit range include: * Synergic design of each entire kit (chain, guides, tensioner, gears, and seals) * High robustness and proven reliability on test benches and in-vehicle fleet testing * High-strength steel, precision-machined tensioners to ensure reduced internal clearances for optimum control and management of the timing chain tension * High-strength plastic guides manufactured with glass fibers for additional strength * High-strength molding steel or sintered steel manufactured gears with specific heat treatments applied for the hardening of the toothed area surfaces
( 3 )
$38.99
Add a custom look to your engine without breaking the bank with timing covers from Trans-Dapt. They feature stamped steel construction in a chrome or powdercoated finish to add just the right look to your project. Their durable finish cleans up easily to provide lasting good looks under your hood.
( 41 )
$46.99
Harland Sharp rocker arm shaft bolts are for use with your Harland Sharp rocker arm shaft hold-downs. These bolts are made from strong and durable steel for reliable performance.
( 1 )
$30.99
When it's time to replace or upgrade the valves in your Trick Flow® cylinder heads, don't cut corners—turn to the company that originally made them. These replacement valves are the same high quality units used in Trick Flow® assembled heads. Features include stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). The valves install without any modifications and are available for all Trick Flow® cylinder heads.
( 37 )
$26.99
Cloyes wear plates prevent your cam from walking and provide a good anti-friction surface. Cloyes offers several styles of wear plates for various applications.
( 7 )
$24.99
Milodon offers nearly 20 types of timing gear drive replacement parts for specific year/make and engine applications. Direct-fit components include cam covers, gears, and hubs; crank gears; bushings, bearings, seals, and hardware; main housings; idler axles, gears, and retainers; mounting plates and more. Order the replacement parts recommended for your timing gear drive.
( 9 )
$26.95
—
$57.95
Clearance
Are you putting Brodix cylinder heads on your engine? Or, do you just need high-quality valves for a project engine you're building? Order Brodix quality exhaust valves and be done with it. They're available in several configurations to cover a variety of vehicle and engine applications.
( 3 )
$50.99
Manley Severe Duty series performance valves are a great choice for your high performance or race engine. All valves are made from stainless steel (intakes are NK-844; exhausts are XH-428) with chrome stems and hardened valve tips. Severe Duty series valves are made of superior materials, are fully machined and swirl polished, and are available with either undercut "Pro Flo" stems or straight stems.
( 17 )
$22.45
—
$35.84
COMP Cams High Energy timing sets are a solid choice for many applications. They are designed to meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 27 )
$52.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$24.95
—
$55.95
These Proform extruded aluminum shaft mount roller rocker arms will help rid your engine of internal friction. They not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. These rockers are precision-machined to ensure consistency and ratio accuracy and have a great looking anodized finish.
( 40 )
$26.99
Cloyes engine timing sets meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These sets are available in various timing chain styles, such as link belt, single roller, and single non-roller. The gears are made from high alloy steel, and heat treated for durability; while the chain is pre-stressed, and heat treated for longevity. Order the timing set designed for your specific model application.
( 7 )
$20.99
Manley Race series performance valves are a great choice for your bracket, oval track, or high performance street engine. All valves are made from stainless steel (intakes are NK-842; exhausts are XH-426) with chrome stems and hardened valve tips. In addition to being made from high-quality materials, Race series valves are swirl polished and fully machined.
( 76 )
$22.45
—
$24.11
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
