Availability
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 95 )
$4.50
—
$276.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
—
$25.99
Jesel camshaft bearings incorporate a lead-based alloy Babbitt material that's applied to a precision centerless ground seamless steel back. This Babbitt material, in conjunction with a dry-film polymer lubricant, protects the bearing surface from damage due to instances such as cold starts, low oil flow, and catastrophic loss of oil pressure. In an effort to reduce oil windage and oil aeration from the camshaft, Jesel offers encapsulated needle-bearing camshaft bearings for a 50 to 70mm cam core. The low friction rollers are designed to operate with a minimal supply of oil. If you will be running a belt drive with this bearing, provisions need to be made to supplement the oil supply to the thrust washers of the belt drive. Order the bearing size needed for your application.
Not Yet Reviewed
$54.00
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$8.99
—
$399.99
Clevite engine bearings have helped power every single NASCAR champion since 1948 to Victory Lane, setting the pace for quality and reliability in the most demanding of settings. Their V-Series main bearings typically have low to medium eccentricity and a hardened steel back with a high crush for better seating and retention. They also do not have flash plating on the steel back to provide better dimensional accuracy and bore contact, using a lead-indium overlay which offers better conformability than lead-tin copper overlay with slightly reduced wear resistance. For daily drivers, and racers on tracks around the country, Clevite continues to be the brand of choice for engine builders with the coated V-Series main bearings best suited to match their application.
Not Yet Reviewed
$212.99
—
$289.99
Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. These H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. Clevite H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They come with 180 degree oil grooves, and can be ordered with an extra 0.001 in. of clearance if needed.
( 4 )
$115.99
—
$212.99
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 2 )
$31.99
—
$163.99
If you liked the results you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series main bearings. Built on unplated steel backings, for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. Unlike Vandervell main bearings, Clevite V-Series main-bearing sets use a single-piece thrust bearing, so you don't need separate, assembled thrust bearings. Extra-clearance variations are available to provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$87.99
—
$419.99
Ford Performance Parts cam bearings are available as common outer and inner diameter replacement cam bearings for use with standard camshafts or custom ground O.D. camshafts. They are also offered as low-friction, roller camshaft bearings that only require oil "splash" lubrication. Roller camshaft bearings allow oil feed holes to be totally blocked off, to reduce oil aeration and windage losses. Engine blocks must be machined to accept roller camshaft bearings and require an SAE 8620 steel camshaft.
( 1 )
$114.99
—
$251.99
Looking for a really trick way to drop a bunch of friction in your Ford engine? Naturally, Ford has the answer. These Ford Performance Parts roller cam bearings will do the trick. They're ultra-low-friction needle roller types, and they require so little lubrication that you can actually block off the stock cam oiling holes. Normal "splash" in the crankcase will get the bearings all the oil they require. This reduces both oil aeration and windage losses. Block machining and an SAE 8620 steel camshaft are required.
( 1 )
$58.99
—
$98.99
All Balls Racing wheel and carrier bearing seal kits are hands-down the most complete line of bearing seal kits on the market! They are available in a wide variety of powersports applications, from ATV and off-road to street bikes. These All Balls Racing wheel and carrier bearing seal kits have premium high-speed bearings that feature low-drag, double-lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention. High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC nitrile elastomer wheel seals are specifically designed to keep out water and dirt. Their rubber coated outside diameter helps to create an optimum seal at the hub.
( 20 )
$63.61
King TFC-Series engine main bearings feature a special factory applied nano-composite polymer coating—with no added thickness! The Top Fuel Line represents the culmination of the innovative and goal oriented research and production from King Engine bearings House. These bearings are available for a wide range of vehicles, especially year/make and engine applications from the 1960s and '70s. Additional details: TOP FUEL BEARINGS with K-40 POLYMER COATING: This coating composition was specially designed for engines experiencing continuous metal-to-metal contact, which is characteristic of the extreme loading and conditions found in various categories of drag racing. K-40 is used for Top Fuel, Funny Car, Pro Mod and similar applications—where bearings are required to resist metal-to-metal contact and deformation. Extreme loads cause the oil film to break down, allowing contact between the bearing and crankshaft surfaces. Maintaining low friction, even during the conditions of metal-to-metal contact, is crucial to the life of any engine bearing. King TFC bearings are designed to withstand the loading generated from 10,000 hp Top Fuel engines. TFC winning attributes: * HIGH STREGTH STEEL: able to withstand extreme loads * SPECIAL DUCTILE BRONZE LINING: will not crack under significant plastic deformation caused by high power engine (10,000 hp) * EXTRA THICK BABBIT LINING: strengthened by copper, excellent conformability * K-40 POLYMER LAYER: provides excellent anti-friction and anti-seizure properties during metal-to-metal contact
Not Yet Reviewed
$208.99
—
$382.99
S&S Cycle offers gear cover camshaft bushings for a wide range of applications, including many Harley-Davidson© street bikes from the 1930s thru 2000. These small cylindrical components sit within the camshaft gear cover on an engine, providing a smooth, low-friction surface for the camshaft to rotate against. They essentially act as a wear-resistant guide and support for the camshaft where it exits the engine block and connects to the timing gear. These bronze replacements for Big Twin bikes provide the proper fit and performance of the original parts.
Not Yet Reviewed
$15.26
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$8.99
—
$10.99
The internals are always important to replace or service when doing an engine rebuild. S&S Cycle pinion shaft bearings let you get that power plant back to prime performance, by replacing your worn bearings. They are an important part to keep your iron pony running well, and keep it fit for those long-haul road trips.
Not Yet Reviewed
$88.16
When you need performance motorcycle parts, S&S Cycle will keep your bike in top form. These camshaft needle bearing assemblies are top-quality OE replacements and they offer a perfect fit for your American V-Twin.
Not Yet Reviewed
$15.26
—
$19.76
S&S Cycle drive sprocket spacers are fatigue-proof OEM replacements for your Big Twin. They will ensure proper sprocket fitment and help with chain clearance, just like the originals they are replacing.
Not Yet Reviewed
$36.86
S&S Cycle chain driven installation kits provide you with bearings, a gear cover gasket, and instructions. Complete your cam install correctly with the correct performance motorcycle parts for your American V-Twin from S&S Cycle.
Not Yet Reviewed
$148.46
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$8.99
Those internals are always important to replace or service when doing an engine rebuild. S&S Cycle crankpin bearing assemblies let you get that power plant back to prime performance, by replacing your worn bearings. They are an important part to keep your iron pony running well, and keep it fit for those long haul road trips.
Not Yet Reviewed
$92.66
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
