Availability
ACDelco GM Genuine Parts crankshaft main bearing sets for your manual engine are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For optimal performance and fit, choose ACDelco main bearings for your GM vehicle.
( 1 )
$18.99
—
$45.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 76 )
$29.99
—
$40.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 85 )
$20.99
—
$27.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 6 )
$88.99
—
$102.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 42 )
$85.99
ACDelco GM Genuine Parts engine connecting rod bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, meaning they will fit and perform as expected. ACDelco GM Genuine Parts connecting rod bearings are offered individually and in sets. Select the ones designed for your vehicle.
( 1 )
$5.99
—
$40.99
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$63.99
—
$79.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 9 )
$53.99
—
$102.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$121.99
—
$194.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 73 )
$49.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 63 )
$91.99
—
$174.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 176 )
$33.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 97 )
$281.99
Clevite balance shaft bearings are manufactured from application specific materials and specifications based on load and wear characteristics for maximum durability. Clevite balance shaft bearings an essential item to the proper operation of balance shafts during an engine rebuild.
Not Yet Reviewed
$37.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 33 )
$27.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$7.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 32 )
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
