Availability
Showing In Stock Items. Show All 33 Items.
Reposition and secure components with ICT Billet alternator/power steering bracket kits. They are crafted from aerospace-grade billet aluminum to provide the strength for a confident move.
( 129 )
$144.99
—
$303.99
ICT Billet alternator brackets are made from aerospace-grade billet aluminum. They come packaged in kits that include alternator brackets, bolts, spacers, and all the necessary mounting hardware. They bolt to the face of the block and can only be used on blocks with at least two mounting holes on the front of the block.
( 279 )
$58.99
—
$289.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$603.95
$87.95
—
$499.95
Summit Racing™ offers LS Serpentine bracket kits for a wide range of Chevrolet vehicles from 1997 and up. The kits include power steering, alternator, and idler brackets—all CNC laser-cut from 6061 aircraft grade billet aluminum and protected with an anodized finish. These engine accessory kits must be used with a GM LS truck-style balancer, alternator, water pump, and power steering pump. Summit Racing™ recommends using an 84 in., 6-rib serpentine belt.
( 3 )
$99.99
—
$100.99
On Sale
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$181.95
$100.95
—
$381.95
If you're looking to swap an LSA or LS engine into your vehicle, but your engine didn't come with a power steering pump or the factory setup is too wide to fit properly in your bay, Holley has the answer. These new Mid LSA/LS Accessory Drive Bracket Kits offer clean, economical mounting of all LS engine accessories. The Power Steering Bracket pulls the pump in closer toward the engine when compared to the original LSA accessories, giving more clearance in swap applications. Also, Power Steering Hard Line Adapter 197-207 is not required, but makes a potentially daunting plumbing task quick and painless. There is no doubt this bracket kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come from factory this way. Product features: * Compatible with the original LSA damper/pulley and similar aftermarket versions * Compatible with Holley's Integral Reservoir and Type II Power Steering Pump (198-101) * P/S hard line adapters available (197-207) * Compatible with Holley P/N 20-160 compact SD7 A/C kit * Compatible with LSA and 2010-15 LS Camaro water pumps * Notably more clearance to swap applications than other options * OE pulley ratios for optimal accessory performance, allows for larger SC crank pulley * Original Equipment look—available in natural and black finishes
Not Yet Reviewed
$158.95
—
$181.95
Lisle manifold drill templates help to make a really tough job easier. Lisle offers several template kits that will allow you to remove broken exhaust manifold studs/bolts without damaging the cylinder head. The kits typically include drill plate and bits, along with other needed components that will assist in completing the job for your application.
( 14 )
$110.99
—
$165.99
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$299.95
$194.95
—
$292.95
Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
( 9 )
$21.00
All of the moving parts under your hood needs hardware to hold them securely in place. That's where ICT Billet steps in. Their line of power steering brackets allow you to mount various types of pumps, working with both serpentine and V-belt pulleys. Crafted from aerospace-grade aluminum, the bracket kits also come with spacers and bolts for proper installation. ICT Billet power steering brackets are available for fitment on a wide range of car and truck makes/models.
( 122 )
$72.99
—
$289.99
ICT Billet idler pulley relocation brackets move the idler pulley down to allow LS1 intake manifolds to be used with truck accessory brackets. Factory brackets will require modification for intake manifold clearance; trim as needed for your intake. Also requires ICT Billet belt #K060980 for 105-amp alternators and #K060988 for high-output alternators. They are made from aerospace-grade aluminum with a natural finish.
( 7 )
$29.99
—
$160.99
ICT Billet engine block drill templates are made from aerospace-grade billet aluminum. To use, you simply attach the template with your factory hardware, mark the hole, and then drill the hole using an "R" drill bit and an M10-1.5 tap. Got an LS truck block that needs the second mounting hole for low-mount alternators or other accessories? ICT Billet makes it simple with their easy-to-use templates.
( 2 )
$18.99
ICT Billet freeze plug retainer plates keep your cylinder head freeze plugs from blowing out when running turbochargers with high amounts of boost—potentially causing high internal cooling system pressures. Order the model recommended for your year/make and engine application. Product details: * Made aerospace-grade billet aluminum * Compatible with all GM Gen III and IV cylinder heads * Includes four freeze plugs and mounting bolts (enough for both cylinder heads, front and rear) * Install the retainer plates over the top of the existing freeze plugs in your heads. These can be mounted on the front and rear of each cylinder head.
Not Yet Reviewed
$87.99
On Sale
Holley power steering mounting plates provide the perfect solution for the factory power steering pumps on late-model engines that have too much pressure for the steering box on most older muscle cars and trucks. These billet aluminum mounting brackets bolt to existing tapped holes on the left side of the cylinder head of Gen III Hemi style engines. Keep your power steering pump securely in place with Holley power steering mounting plates.
Not Yet Reviewed
$79.95
ICT Billet alternator/power steering bracket bolt kits include all necessary bolts to mount the alternator and/or power steering brackets. ICT Billet offers a wide array of high-quality aftermarket automotive products.
Not Yet Reviewed
$25.99
Chevrolet Performance accessory drive components help you easily and conveniently finish your performance engine build, rebuild, or upgrade. They include accessories, brackets, drive belts, necessary hardware, and more—anything your engine needs. Escape the hassle of trying to use knock-offs that may cause more trouble than their worth, order Chevrolet Performance accessory drive components.
Not Yet Reviewed
$2.99
Holley short spacer power steering brackets are offered to secure your pump. They feature aluminum construction with a natural or black finish. You can count on these Genuine Holley Quality Parts to fit and perform properly. Choose your preferred finish.
Not Yet Reviewed
$194.95
—
$238.95
All American Billet power steering bracket kits offer a simple solution for adding your GM Type II or KRC steering pump to your engine swap. These L83/L86 kits are crafted from 6061-T6 aluminum, include stainless steel hardware, and are available machined or polished.
Not Yet Reviewed
$252.95
On Sale
Holley long spacer power steering brackets are available for GM LT4 and LT5 systems. These accessory drive brackets feature aluminum construction and are available with a black or natural finish. Select the one designed for your drive system in the finish preferred.
Not Yet Reviewed
$228.95
$125.95
—
$280.95
Moroso has done it again with these alternator and vacuum pump mounting bracket kits. They feature two separate mounts incorporated into one billet aluminum frame, with belt adjustment for both the alternator and the vacuum pump. Specifically designed for use with an electric water pump, the Moroso alternator and vacuum pump mounting bracket kits eliminate the need for any other types of bracketry. They come available for Moroso, CSR Performance, and Meziere electric water pumps. All mounting hardware and spacers are included, so they will install with most old and new-style drive mandrel kits.
( 2 )
$489.99
Set your P/S pump and bracket with the proper clearance using Holley power steering bracket add-on spacer kits. Machined from aluminum, they are available in a natural or black finish, and will work with wet or dry sump. Select the kit for your setup with the preferred finish.
Not Yet Reviewed
$55.35
PSC power steering brackets are used primarily to adapt or mount various model pumps. These brackets are available in a variety of styles, materials, and finishes--and they include hardware for installation. Maintaining an effective power steering system is essential for control and easy handling. Order the Performance Steering Components bracket designed for fitment with the pump on your make/model vehicle.
( 4 )
$79.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 101 )
$4,599.95
World Products Motown LS cylinder head adapter kits are a necessity if you're using a Motown LS iron block. These adapters enable you to use small block Chevy accessories and accessory brackets on a set of high-flowing LS cylinder heads. The brackets are manufactured from lightweight aluminum and precision-machined for easy installation. Order the kit recommended for your application.
Not Yet Reviewed
$282.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
