Filters
On Sale
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 122 )
$7.60
$6.84
On Sale
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter trays—or buckets—will register your lifters to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 39 )
$9.99
$8.99
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 41 )
$10.30
$9.27
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 17 )
$9.82
$8.84
On Sale
Our precision timing tape is designed to allow you to accurately time street or high performance engines and properly set the valve lash.
( 228 )
$4.99
$4.49
On Sale
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$8.23
$7.41
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 48 )
$7.18
—
$10.82
$6.46
—
$9.74
On Sale
Summit Racing™ race valves for Chevrolets are lightweight, one-piece valves forged from premium 21-4N stainless steel. They will improve power and withstand both the stresses and the high temperatures of performance engines. What's more, to save weight we gave them undercut stems and a swirl-polished finish.
( 64 )
$10.99
—
$12.99
$9.89
—
$11.69
On Sale
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 95 )
$7.99
—
$9.99
$7.19
—
$8.99
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$10.55
—
$11.95
$8.96
—
$9.50
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$6.95
—
$9.61
$6.26
—
$8.65
On Sale
Mr. Gasket crank pulley bolts are made from top-grade steel for strength and durability. Mr. Gasket crank pulley bolts also provide a clean appearance and are zinc plated to resist corrosion.
( 7 )
$10.82
$9.74
On Sale
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$6.52
$5.87
On Sale
Holley LS coil offset brackets were designed to help clear high-mounted alternators when ignition coils are mounted onto Holley LS/Tall LS valve covers. These service part replacements/add-ons are for Holley LS valve covers with 72mm-spaced coil mounting provisions and 5th generation LS coil bodies only. Each assembly consists of an LS coil offset bracket and two coil mounting bolts (standard M6 x 1.0 threads, 14mm long). Gain that critical one inch (roughly) of clearance space with Holley LS coil offset brackets.
( 3 )
$6.06
$5.45
On Sale
Replace your old oil filler cap with a chrome plated cap from Mr. Gasket. They are available in a variety of attachment styles to suit your needs, and they add a fresh look under the hood.
( 18 )
$9.95
—
$11.95
$7.77
—
$8.96
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 2 )
$12.93
$8.40
On Sale
Holley LS valve cover bolt kits are hardware assemblies developed specifically for Holley tall LS valve covers. Available as a single service component or a full set of eight, each bolt assembly features a polished valve cover bolt (M6 x 1.0 threads), aluminum spacer, and OE-style grommet. If you're dealing with lost or damaged fasteners for your tall LS valve covers, don't fret—order Holley LS valve cover bolt kits.
( 1 )
$9.73
$8.76
On Sale
Mr. Gasket's embossed logo sets off these chrome plated twist-on breather/oil filler caps. They have a high porosity filter plus an internal baffle, and are ideal for high performance use.
( 6 )
$9.81
$8.83
On Sale
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 96 )
$9.07
$8.16
On Sale
Scott Drake oil pan drain plugs are just what you need, because they're just like the originals. These replacement seals come with a nylon washer, as well. The plugs are offered in multiple styles, including a magnetic version for your classic that will fit perfectly and catch metal shavings in the engine oil.
( 1 )
$10.91
$9.82
On Sale
These steel valve cover clamps from Mr. Gasket help distribute bolt pressure more evenly, for better sealing. They're available in several styles, and some come with bolts.
( 3 )
$8.95
$8.06
On Sale
Summit Racing™ offers the best pushrods you can find for the price. Made from cold-forged 4130 chromoly, they feature a one-piece, heat-treated design for durability. These assembled replacements have a minimum wall thickness of .080 in. to handle higher rpm, plus a black oxide finish for protection. They're also machine-dressed and drilled to ensure radius and oil hole diameter. Order the size needed for your application.
( 100 )
$8.99
—
$10.99
$8.09
—
$9.89
On Sale
Replace your old plugs with Longacre Racing magnetic drain plugs. They may help to extend the life of your engine and tranny. Their magnetic tip traps the ferrous particles that your filter misses. Longacre Racing magnetic drain plugs provide an inexpensive way to rid your equipment of damaging grit. Check them during each oil change to spot developing problems and simply wipe them clean with a rag.
( 2 )
$11.99
$10.79
On Sale
Sierra Marine offers a wide selection of parts, including thrust bearings to maintain, tuneup, or overhaul your boat. Thrust bearings support the axial thrust of both horizontal and vertical shafts. The functions are to prevent the shaft from drifting in the axial direction and to transfer thrust loads applied on the shaft. A boat's thrust bearings transfer the propeller's thrust from the shafting to the hull structure, which allows the propeller to be partially decoupled from the engine, while still allowing the engine to drive the propeller. Select the bearings in the best application option for your needs.
Not Yet Reviewed
$11.99
$10.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
