Availability
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 57 )
$779.99
—
$1,044.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 20 )
$849.99
—
$874.99
Canton Racing Accusumps are oil reservoirs that connect to the engine's oiling system. They are designed to collect pressurized oil from your engine and store it so that it may be discharged when oil pressure is low. Canton Racing Accusump oil accumulators deliver oil before starting to eliminate dry start scuffing (pre-oiling). They also discharge oil during low oil pressure surges to protect against engine damage during demanding racing conditions.
( 22 )
$796.00
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$899.99
Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.
( 7 )
$987.50
—
$1,046.95
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
( 1 )
$832.99
—
$980.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
Replace your low performance V-belt pulleys and brackets with performance serpentine kits from March. They feature March's all-billet performance pulleys and brackets, which are designed to free up extra horsepower, while eliminating the possibility of belt throwing.
( 16 )
$750.99
—
$1,051.99
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$766.00
—
$1,082.00
Add race-proven Mahle PowerPak pistons to the bolt-on performance of your Twisted Wedge® cylinder heads for a winning combination of power for your Ford. Specifically designed PowerPak piston kits complement the unique chamber and valve angles of your Trick Flow® Twisted Wedge® Ford cylinder heads. These forged aluminum alloy piston kits feature lightweight slipper skirts, machined crowns, CNC-finished pin bores, low drag ultra-flat rings, German steel pins, and race-proven round wire locks. The pistons are deburred and coated with dry phosphate to protect against micro-welding in the ring grooves and pin galling during initial startup. Piston skirts are given Mahle's proprietary Grafal anti-friction coating for additional performance. With specific pocket location and depths to match your Trick Flow® heads, these assemblies enable the use of aggressive cams, allowing you to pull every last bit of horsepower from this high-powered pair. These PowerPaks are available for all of the most popular flat top and inverted dome applications. Give your Ford an edge to victory with Mahle Twisted Wedge® PowerPak piston kits.
Not Yet Reviewed
$762.16
—
$1,094.93
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
COMP Cams LST Series hydraulic roller camshafts deliver "Low Shock Technology." These LST camshafts feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. From street durability to track power, COMP Cams LST Series hydraulic roller camshafts are an awesome choice for your build. The cams are available for a variety of engine, piston, and engine applications.
Not Yet Reviewed
$876.95
With more than 70 years of experience, it's no wonder JE Pistons is the world's leader in high performance pistons. How do they stay in front? Easy—by constantly improving designs, materials, and production processes, using state-of-the-art machining techniques, and incorporating other methods to keep costs low. The result is a line of great, economically priced pistons with features such as radiused valve reliefs (where applicable), forced piston-pin oilers, diamond-turned skirts, gas ports, and more! These forged aluminum pistons are available in various styles and sizes for fitment with specific engine applications.
Not Yet Reviewed
$899.99
—
$1,124.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 315 )
$756.99
March Performance Ultra Series Chevy Small Block serpentine systems bolt to the front of 1969 or later small block Chevy heads. Precision CNC-machined from solid billet 6061-T6 aluminum to fit perfectly and handle high torque and vibration, these bracket kits come complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. Powdercoated to eliminate polishing in those hard to reach places. Matching serpentine pulleys are precision CNC-machined from 6061-T6 aluminum. This is the same material March uses for NASCAR pulleys! These pulleys will not fracture like common cast pulleys. High tensile strength means much longer wear. March hard coats the high-wear areas on the high-water flow ratio pulleys! The street rod ratio increase water flow and fan speed. This helps at critical low speed driving.
( 10 )
$804.99
—
$942.99
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$940.31
COMP Cams LST Series solid roller camshafts deliver "Low Shock Technology." These LST cams feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. For maximum horsepower with either stock or aftermarket pistons (choose the model suited to your application), COMP Cams LST Series solid roller camshafts are an excellent option for your build.
Not Yet Reviewed
$855.95
March Performance Chevy big block serpentine conversion kits simply bolt onto the front of any big block Chevy heads. Depending on the kit you choose, the alternator, A/C, and optional power steering will be either outward or mid-mounted. These pulleys are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. They are then clear powdercoated to eliminate polishing in those hard-to-reach places. These pulleys will not fracture like common cast pulleys, since they have high-tensile strength for much longer wear. The street rod ratio increases water flow and fan speed, which helps during critical low-speed driving. The kits are available with performance pulleys for increased horsepower, high water flow ratios for increased cooling, or mid-performance ratios for a combination of both.
( 51 )
$896.99
—
$975.99
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 22 )
$751.09
—
$1,160.43
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 5 )
$751.09
—
$1,160.43
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$816.95
March Performance Chevy big block serpentine drive kits simply bolt onto the front of any big block Chevy heads. The bracket kits come complete with stainless steel tensioning rods and chromoly rod ends for high performance operation. Matching serpentine pulleys are precision CNC-machined from 6061-T6 aluminum and then clear powdercoated to eliminate polishing in those hard-to-reach places. These pulleys will not fracture like common cast pulleys, since they have high tensile strength for much longer wear. The high-wear areas on these pulleys are hard coated. Their street rod ratio increases water flow and fan speed, which helps at critical low-speed driving. These performance pulleys create approximately 12 hp, depending on the accessories driven.
( 5 )
$752.99
—
$863.99
JE Pistons 350/400 18 degree flat top pistons are compatible with angle milled heads and feature a race-proven, low-friction skirt design. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. These pistons utilize dedicated left and right hand forgings.
Not Yet Reviewed
$1,024.99
March Performance Ford 429-460 serpentine drive kits are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. They are powdercoated to eliminate polishing in those hard-to-reach places, and then hard coated in high-wear areas. These pulleys will not fracture like common cast pulleys, since high-tensile strength means much longer wear. The street rod ratio increases water flow and fan speed, which helps at critical low-speed driving.
( 11 )
$948.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
