Availability
Showing In Stock Items. Show All 110 Items.
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 799 )
$788.99
—
$1,044.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 21 )
$849.99
—
$874.99
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
Briggs & Stratton Junior 206 crate engines are made tough! Each engine is hand-assembled in-house using tooling and dies specifically made for racing--for unparalleled repeatability. The factory-sealed long blocks include a ground cam and controlled piston pop-up (reducing compression variance). They're a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory carburetor jets. These 206 race engines are powerhouses! Briggs & Stratton Junior 206 race-only crate engine specs and features: * Primary use: for karting, high school/collegiate Supermileage Competitions * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs for seasons of racing * High-grade stainless steel, dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 4,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket * Max Torque clutch, driver, and installation kit * Green premium air filter * Carburetor locking cap
( 1 )
$759.00
Building off the proven success of the Animal engine, Briggs & Stratton M-Series crate engines are the first dedicated racing engine engineered to meet the needs of the Quarter Midget market. Right out of the box, the M-Series is focused on the consistency and simplicity that racers expect. Briggs & Stratton race-only M-Series crate engine specs and features: * Performance and durability: Technology from OHV racing engineered to the specific needs of Quarter Midget racing * Assembled by hand and tested to strict quality standards * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear—and hardened splined output shaft for 6-1 gearbox (555721) * Custom top control plate firewall clearance * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * High-silicon racing engineered valve springs for seasons of racing * High-grade stainless steel dished valves with nitrited exhaust * Three-piece automotive style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket
Not Yet Reviewed
$759.00
Using only state-of-the-art equipment and advanced techniques, Scat is able to offer the automotive aftermarket World Class, race proven forged and billet crankshafts including the Pro Series big block post crankshafts. These Scat crankshafts are machined in-house using premium non-twist single plane 4340 forgings. Each Pro Series big block post crankshaft is skillfully machined, precision finished, ion-nitrided and also heat-treated for superior quality, extreme strength, and durability, and fully customized to your needs. Order the crankshaft designed for your application needs. Product features and details: * Manufactured from non-twist single plane 4340 forgings * Precision ground, heat-treated and Nitrided for superior wear-resistance * Straight shot and chamfered oil holes * Large radius on all journals * Lightening holes in all rod journals * Aero Wing counterweights * All popular engines, strokes, and rod sizes
Not Yet Reviewed
$1,034.99
Do away with those annoying oil leaks and add some style at the same time with Chevrolet Performance cast aluminum valve covers. Their durable die cast construction resists warping and keeps its shape at the rails, for excellent gasket sealing. The covers are available with a number of GM logos, with multiple breather hole configurations. Some covers come without any breather or oil fill holes for custom applications.
( 16 )
$1,093.90
—
$1,154.60
World Products Windsor Jr. heads feature 180cc intake runners that combine high velocity and superior flow to produce excellent torque and throttle response in stock to mildly modified 5.0L engines. The 58cc combustion chambers are sized for true bolt-on compatibility, and have been "tweaked" to optimize efficiency. Windsor Jr. cast iron cylinder heads provide a very cost-effective solution to getting serious power from a Ford 5.0 motor without spending a ton of money. And when it comes to value, you can't beat the assembly packages from World. Top-grade components are used as your assurance of reliability, with World passing bulk buying advantages right through to their customers.
( 7 )
$772.40
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$875.99
—
$1,199.99
$788.39
—
$1,079.99
World Products Windsor Sr. cylinder head models combine high velocity and superior flow to produce excellent torque and throttle response in 5.0L engines. Windsor Sr. heads are perfect for slightly modified or stock engines. They have been designed in collaboration with leading Ford racers. The 64cc combustion chamber is sized for true bolt-on compatibility, and has been "tweaked" to optimize efficiency. Windsor Sr. cast iron cylinder heads provide a very cost-effective solution to getting serious power from a Ford 5.0 motor without spending a ton of money. And when it comes to value, you can't beat the assembly packages from World. Top-grade components are used as your assurance of reliability, with World passing bulk buying advantages right through to their customers.
Not Yet Reviewed
$772.40
OTB Gear LS Vintage valve covers are true old school-style covers that change the look of your modern LS to a retro version that's more in tune with your classic hot rod or custom's attitude. The finned topside design of these OTB LS vintage covers was inspired by early Corvette powerplants and the hardware includes stainless steel acorn nuts, washers, and standoffs to install in the head. Gaskets are also included, and a screw-in oil fill cap has been placed on the upper inside of one valve cover so to not interrupt the flow of the beautiful, distinctive fins. OTB LS vintage covers are cast from premium A-356 aluminum alloy with radiused valleys between the fins for easy cleaning. They are a full 3 1/2 in. tall, and are offered with a beautifully polished or sand blasted finish for a more low-key look. Add a timeless appearance to your LS engine; select the finish preferred for your vehicle's engine bay.
Not Yet Reviewed
$894.99
CP Pistons Honda B-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures. Their state-of-the-art equipment produces superior pistons that will not compromise your expectations. The climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features: * Full radius dome designs * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$885.15
CP Pistons Subaru piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, unique fixtures, and state-of-the-art equipment to produce superior pistons that won't compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry—and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional notes and/or kit features: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$885.15
CP Pistons Mitsubishi piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, unique fixtures, and their state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$885.15
JE Pistons 427/428 FE inverted dome top pistons are specially designed for aftermarket blocks and heads and are for use with the 427 or the 428 crank aftermarket 6.700 in. rod. Be sure that the factory block is sonic-checked for 4.280 in. and 4.310 in. bores. These pistons use 1/16, 1/16, 3/16 rings. The compression ratios are figured for 10.150 block height. Larger bore sizes are available as customs; please contact the manufacturer for details.
Not Yet Reviewed
$1,099.99
JE Pistons 302/351W big bore dome top pistons for small block Ford are available in large bore sizes to accommodate new aftermarket race blocks and most aftermarket and factory heads. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings. Cleveland and TFS twisted wedge heads will require custom pistons.
Not Yet Reviewed
$1,024.99
—
$1,099.99
JE Pistons 460 flat top pistons are compatible with OEM and aftermarket standard valve location heads. They will accommodate oversized valves and long-duration, wide lobe separation cams. The precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and compression height is figured for 10.300 block height. SVO C, E, and Boss aluminum heads will require custom piston applications.
Not Yet Reviewed
$949.99
PRW pedestal-shaft rocker arms are made from 6061-T6 or Series 7000 2024 aircraft quality aluminum alloy extrusions. Each rocker body is relieved for extra valve spring clearance and anodized for added strength. Each rocker body is shot-peened and machined for extra valve spring clearance; then anodized for better cooling and added strength. Each rocker arm incorporates needle roller bearings from the finest manufacturers in the world. CNC-machined billet steel pedestals, center-ground steel alloy rocker shafts, and PRW Custom-4135 alloy steel fasteners, valve lash adjusters and 12-pt. lash nuts comprise the foundation of these rocker arm systems. The kits come with the components and necessary hardware required for a professional installation. Order the rocker arms designed for your application needs. Features and characteristics: * Rated 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * SAE 42100 full complement precision needle and cage roller bearings * Available in 1.5 or 1.6 ratio, and 1.5/1.6 split-ratio assemblies
Not Yet Reviewed
$775.05
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,119.50
$877.95
—
$1,073.50
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$779.24
These Edelbrock Victor Max Wedge big block Chrysler cylinder heads are designed for the serious race enthusiast. They are made of aluminum and feature raised intake and exhaust ports for improved flow characteristics. The raised valve cover rails eliminate any chance of leaking gaskets. Available with or without valves, the Edelbrock Victor Max Wedge big block Chrysler cylinder heads have reamed and semi-finished valve stem guides and no valve job. They require final guide sizing, valve seat finishing before installation, and special offset rocker arms for the intake side.
( 2 )
$1,041.50
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$1,041.50
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,065.50
—
$1,087.50
$958.95
—
$978.75
On Sale
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
$842.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
