Availability
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$785.99
—
$802.99
CVR mechanical vacuum pumps can be used on wet or dry sump engines and are designed with precision-sealed roller bearings. They are precision-machined from T-6 6061 aluminum and clear hard-anodized for extended wear. CVR pumps achieve greater vacuum sooner and are maintenance-free. They're also available as a kit with a mounting bracket for small block and big block Chevrolet cylinder heads, or any engine using a motor plate.
( 1 )
$552.99
Moroso has done it again with these alternator and vacuum pump mounting bracket kits. They feature two separate mounts incorporated into one billet aluminum frame, with belt adjustment for both the alternator and the vacuum pump. Specifically designed for use with an electric water pump, the Moroso alternator and vacuum pump mounting bracket kits eliminate the need for any other types of bracketry. They come available for Moroso, CSR Performance, and Meziere electric water pumps. All mounting hardware and spacers are included, so they will install with most old and new-style drive mandrel kits.
( 2 )
$520.99
—
$524.99
On Sale
Waterman Racing complete belt drive kits include the bracket assembly, fuel pump pulley, crankshaft mandrel assembly with pulley, belt and hardware for installation. The kits are designed to mount a fuel pump on either the driver or passenger side on a Chevrolet small block or big block engine. Order the belt drive kit recommended to fit your application.
Not Yet Reviewed
$699.99
$629.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 27 )
$178.99
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 386 )
$514.95
—
$816.95
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$503.95
—
$816.95
On Sale
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 340 )
$522.99
—
$742.95
COMP Cams Xtreme Energy retrofit camshafts are built to take advantage of the latest cam technology—and provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these hydraulic roller tappet cams provide better throttle response, engine vacuum, and top-end horsepower than equivalent cams from other manufacturers. Choose the model and options designed for your engine application.
( 58 )
$522.99
—
$579.95
On Sale
COMP Cams Xtreme Marine camshafts take advantage of the newest developments in camshaft engineering. Their aggressive lobe design produces better throttle response and top-end horsepower than other cams with the same duration at .050 in., while delivering increased engine vacuum. These cams are available for everything from pleasure boats to race applications, so you can always enjoy Xtreme performance on the water. From hydraulic and mechanical, to flat and roller tappet, COMP Cams offers camshafts for your watercraft dating as far back as the 1950s.
( 19 )
$531.95
—
$579.95
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$502.99
—
$646.99
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$704.95
$505.56
—
$730.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 42 )
$506.95
—
$514.95
COMP Cams Xtreme 4x4 camshafts are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 1 )
$549.95
COMP Cams Xtreme marine cam and lifter kits take advantage of the newest developments in camshaft design. Their aggressive lobe design produces better throttle response and top-end horsepower than other systems with the same duration at .050 in., while delivering increased engine vacuum. These kits are available for everything from pleasure boats to race applications, so you can always have Xtreme performance on the water.
( 20 )
$500.95
—
$817.95
Moroso dry sump breather tanks allow a place for air to escape to the atmosphere. They're designed to be used as a remote breather and oil separator on dry sump tanks and rear axle housings. They have -12AN fittings to simplify plumbing, can be mounted to any panel with included mounting straps, and come complete with a filtered breather and draincock. A perfect companion for Moroso's Racing vacuum pumps or dry sumps, these tanks are all-aluminum and lightweight.
( 3 )
$505.99
LS Classic Series big block Chevy style valve covers are designed to give the appearance of a big block Chevy while fitting the LS family of engines. Like all our cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 2 in. tall. The valve covers include a billet aluminum filler cap on one cover for easy oil filling, and come with all the necessary mounting hardware, including factory look load spreaders. They also have a ported PCV fitting/vacuum port and oil splash baffle in one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Covers are available with a natural cast finish, chrome plated, or painted Chevrolet orange and include vintage Chevrolet Tonawanda factory stickers. Order the LS valve cover in your preference of finish.
Not Yet Reviewed
$710.95
LS Classic Series 409 Chevy style valve covers are designed to give the appearance of an early 1960's 348 or 409 Chevy, while fitting the LS family of engines. Like all LS Classic cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 2.750 in. tall. The covers come with all the necessary mounting hardware, including factory look load spreaders, and have a ported PCV fitting/vacuum port and oil splash baffle in one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Covers are available with a natural cast finish, chrome plated, painted Chevrolet orange or 409 champagne, all with vintage 409 Turbo-Fire factory stickers. The covers have no provision for oil fillers and can be used with LS Classic Series valley plate with an oil fill tube. Order the valve cover in the finish you prefer.
( 2 )
$724.95
LS Classic Series small block Chevy style valve covers are the perfect fit for your retro LS package. Like all LS Classic Series cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 1.625 in. tall. The covers are available with a natural cast finish and the LS Classic script is removable and can be replaced with your custom logo. The covers include a ported PCV fitting/vacuum port and oil splash baffle on one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Note: The covers have no provision for oil fillers and can be used with a LS Classic Series valley plate with an oil fill tube.
Not Yet Reviewed
$578.95
Moroso billet aluminum valve covers are CNC-machined from a billet aluminum bar to make them lightweight without sacrificing strength. Their airtight sealing allows the engine to pull greater vacuum for improved ring seal and power. The covers are available plain or with the Moroso logo, natural or black anodized—and mount with either a centerbolt or perimeter bolts. Order the pair designed for fitment with your vehicle and engine application.
( 2 )
$564.99
—
$761.99
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 83 )
$586.99
—
$899.99
Eagle now offers their CRS lightweight H-beam connecting rods in their Featherweight series. The lighter design provides less rotating mass for flawless high-rpm performance. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides superb strength at a fraction of the weight of most other rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. The rods have a stout cap screw attachment with precision cap alignment sleeves to positively locate each rod cap. They come with 220,000 psi rated ARP 2000 cap screw rod bolts, instructions, and rod bolt lubrication.
( 3 )
$642.99
—
$847.99
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$799.99
—
$824.99
Crower performance Level 1 cams are designed to enhance throttle response and low-end torque in vans, trucks, passenger cars, and mild marine applications, while delivering fuel-efficient monitoring. High vacuum, smooth idle, and maximum efficiency are characteristics of these cams. They are intended for stock or near-stock engines and drivetrains.
( 1 )
$504.99
—
$800.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
