Availability
Showing In Stock Items. Show All 19 Items.
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 8 )
$587.95
Manley lightweight dual drag race valve springs offer exceptional strength and performance, while reducing weight and promoting higher revs. These springs are manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. Manley valve springs are smaller in diameter with a lightweight dual design, allowing engines to rev higher faster, and with better valvetrain control. An extended tip thickness is designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading. It's amazing to think that a tenth of a second can make any difference, but racers win or lose sometimes by thousandths. Manley lightweight dual drag race valve springs will add strength, while reducing weight and times.
Not Yet Reviewed
$781.46
On Sale
COMP Cams FSL hydraulic roller camshafts offer drop-in convenience—with no valve spring changes or computer tuning required—for the LS3 engine family. The FSL cams provide proven 32 rwhp improvement without the risk of non-compliance with emissions regulations. COMP Cams FSL hydraulic roller camshafts work with stock components and a stock tune to produce an increase in peak power. Order the model designed for your vehicle/engine application.
( 1 )
$649.95
Revolutionary COMP Cams XFI AFM GM Gen V camshafts are designed to work with the direct-injection, VVT (variable valve timing), and AFM (active fuel management) lifters featured in GM's Gen V (LT1/L83/L86) V8 engine. They feature four different lobe profiles to both create AFM compatibility and optimize intake and exhaust valve opening/closing events. The camshafts increase torque and horsepower throughout the entire rpm range, while providing excellent responsiveness and midrange power over stock for across-the-board gains. The COMP Cams XFI AFM GM Gen V camshafts require the COMP Cams phaser limiter kit (sold separately), which limits the range of camshaft movement from 62 to 22 crank degrees, thus requiring PCM tuning.
( 3 )
$574.95
On Sale
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
$545.36
COMP Cams Godzilla hydraulic roller camshaft upgrades are designed to provide amazing drivability and throttle response, while producing increased torque across the entire RPM range with a significant horsepower bump with minimal effort. They're available in three distinct models: * Stage 1 NSR/NTR model: Utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. They requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter. However, minimal ECU tuning may be required to meet the maximum potential. Testing with an optimized tune resulted in over 60 hp and 15 lbs.-ft. over stock with a much broader torque curve—impressive gains with minimal effort and zero compromise. * Stage 2 NSR model: Maintaining use of the phaser with a limiter kit allows these camshafts to also produce incredible horsepower. They offer maximum torque in the low- to mid-range for heavy vehicles and towing. Stage 2 cams deliver an increase of over 75 lbs.-ft. of torque at 3,000 rpm! They require a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of more than 75 hp over stock. One look at the torque curve produced by this camshaft will have your tires crying for mercy. * Stage 3 model: Godzilla Stage 3 camshafts are made for crate engines and engine swaps into lighter vehicles and those seeking maximum horsepower while still utilizing the phaser with a limiter kit. These cams bring the exhaust note that is worthy of the Godzilla name. They will produce well over 600 hp on pump gas! Awesome power can be expected, from 5,000 to 6,700 rpm with the valve spring kit (P/N 7230GCS-KIT) and a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of nearly 100 hp and 25 lbs.-ft. over stock. This much horsepower will make even Godzilla fly.
Not Yet Reviewed
$677.95
These Summit Racing™ camshaft and lifter kit Pro Packs have been put together to cut down on costs and save you precious time. They include a new camshaft, matching lifters(except where noted), and assembly lube. The Summit Racing™ camshaft and lifter kit Pro Packs are available with a variety of different camshaft profiles, so you can choose which one is best for your engine combination.
( 5 )
$782.48
COMP Cams XFI AFM GM Gen IV camshafts are designed to work with the VVT (variable valve timing) and AFM (active fuel management) components of GM V8 engines. They deliver outstanding top-end power in modified L99-style applications without sacrificing low-end power when properly programmed. Get an increase in performance with the lobe profile of COMP Cams XFI AFM GM Gen IV camshafts.
( 1 )
$649.95
On Sale
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$579.95
$521.96
These COMP Cams Xtreme 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 kit for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 14 )
$559.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$570.95
—
$589.95
On Sale
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
