Availability
Showing In Stock Items. Show All 144 Items.
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 30 )
$71.99
Installing a new camshaft is a sure way to improve horsepower—just remember that the rest of the valvetrain must be upgraded for proper operation. These Summit Racing™ valve spring and retainer kits include everything you need to keep your engine running in top shape after a cam swap. Each set features high-quality valve springs, steel retainers and locks, and Viton® seals. They're available in multiple size options.
( 71 )
$104.99
Performance cam designs require performance valve springs to keep everything under control and running smoothly. And modern springs with non-stock diameters require new retainers to handle the recommended higher pressures and installed heights. Summit's® steel valve spring retainers are an affordable solution. Precision-machined from 4140 chromoly and finished in black oxide, these retainers are specifically designed for positive retention and location when combined with performance valve springs. They're available for single, double, and beehive-style spring applications.
( 11 )
$50.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$50.95
—
$114.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
BTR Beehive valve springs, with their conical shape, can deliver enhanced performance. They may also provide lower seat pressures, so your valvetrain components are less stressed. BTR springs are produced from quality materials, and their beehive design will support more RPMs than stock cylindrical springs. Valve springs are the fastest moving components in your engine. Choose BTR Beehive valve springs for better durability, higher RPM potential, and performance. They're available in a variety of size, pressure, and lift options for countless applications from 2001 and up.
( 9 )
$89.99
—
$99.99
Chevrolet Performance offers these valve springs for a variety of applications, and because they come from Chevrolet Performance, you can be assured that you're getting the right valve springs for your needs.
( 7 )
$80.00
—
$99.76
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing dual valve springs are specifically designed for cams with aggressive profiles, and are available with damper coils for extra spring surge prevention. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 28 )
$111.99
Trick Flow® steel valve spring retainers are made from hardened 4140 chromoly steel for great performance characteristics and reliability. On top of that, they're black-oxide coated for corrosion protection and good looks. They install at standard height and there are versions available for single or double springs and 7 or 10 degree valve stem locks.
( 13 )
$50.99
—
$107.99
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$65.95
—
$83.95
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing single valve springs feature flat internal damping coils to prevent spring surge at high revs, maintaining proper spring pressure at critical load levels. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 23 )
$56.99
—
$112.99
Expected motor life has increased greatly through the years, but anything with moving parts is susceptible to wear and will eventually need rebuilt. PAC Racing 300 Series valve spring retainers are made from 4140 aerospace grade chromoly steel, making them an excellent choice for stock to slightly modified rebuilds. PAC does their own in-house manufacturing, allowing them to build strength into these units. They are heat-treated for solid wear characteristics and to raise the tensile strength, and for a rust-free finish, they apply black oxide coatings. Into every engine a little work must go; make certain you use the right parts for your stock to slightly modified build with PAC Racing 300 Series valve spring retainers.
( 10 )
$86.94
PAC Racing valve spring seats and cups are a great way to prevent dancing springs, which would tear up your aluminum heads. High performance racing engines place extreme pressure on the springs. These retainers are essential for use on aluminum heads. They fit the inside or outside diameter of the springs, preventing spring seat movement.
( 8 )
$85.00
—
$88.02
Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.
( 42 )
$56.95
—
$117.95
Howards Cams street/strip valve springs are coiled and heat-treated in the finest facilities available. Howards research and development teams are constantly updating materials and manufacturing techniques to provide the best possible valve springs. You can count on Howards Cams Performance street/strip valve springs to be on the cutting edge of valve spring technology.
( 31 )
$55.99
—
$105.99
Edelbrock's valve spring retainers are made of superior-quality steel, and are machined and heat-treated for strength. They have a black oxide finish for rust and corrosion protection. And when matched with Edelbrock's valve stem lock kits and valve springs, Edelbrock valve spring retainers will give you the reliable valvetrain performance you need for your street rod, daily driver, or competition vehicle.
( 9 )
$92.95
—
$113.95
Have you broken a valve spring, or are your old ones just worn out? Ford Performance Parts valve spring sets will have your valvetrain working just like new. They make both single and double springs that will fit a variety of cylinder heads. You can choose from many different spring and seat pressures, and they will work on everything from stock street vehicles to full-out race cars.
( 2 )
$64.99
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow by PAC Racing beehive valve springs allow you to drop in a more aggressive cam without machining your spring seats (most applications). PAC springs are CNC-coiled from high-tensile-strength, extra-durable Pacaloy™ chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 18 )
$57.99
—
$76.99
Keep your valve springs in place with these AFR hardened spring cups. These spring cups are designed to give your valve spring a hardened surface to mate to so that the cylinder head is protected from damage and excessive movement is limited. AFR offers these hardened spring cups in a variety of diameters to help you find the right one to match your valve spring.
Not Yet Reviewed
$82.95
Trick Flow® valve springs are the perfect choice to use with your Trick Flow® or other brand camshaft. Made to work with higher lift cams, the strong and durable springs are made of the highest quality spring wire and are precision-wound to exact specifications. They're perfect for use in head rebuilds or in street performance, drag racing, and circle track engines.
( 6 )
$53.99
Manley valve spring cups and locators protect your expensive aluminum heads from being galled by your high-pressure valve springs. They are quality-machined to a .062 in. or .035 in. thickness from heat-treated steel with a corrosion-resistant black oxide finish. Manley valve spring cups and locators are available in inside diameter (spring locator) or outside diameter (spring cup) styles.
( 17 )
$95.28
—
$108.13
Wear and tear on valve springs from today's aggressive camshafts can cause you to lose height and tension, equaling loss of power. Crower copper plated and case-hardened valve spring shims will take a pounding while achieving proper spring install height to keep you moving. Crower valve spring shims are available in single or assorted thickness sets.
( 2 )
$106.99
—
$107.99
Howards Cams stock diameter performance valve springs deliver increased valvetrain stability and performance over your OEM springs. Made from premium chrome silicone, these springs are coiled and heat-treated in the finest facilities available. They're available for most performance hydraulic and mild mechanical flat tappet applications.
( 3 )
$76.99
Trick Flow® valve spring I.D. locators are perfect for upgrades and rebuilds. They are made from hardened 4140 chromoly steel for long life and are black oxide coated for a high-quality appearance. These I.D. locators are available in many popular sizes and work with all cast iron and aluminum cylinder heads.
( 2 )
$54.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
