Engines & Components - fuel KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Moroso Tri-Lobe Dry Sump Oil Pumps

Moroso aluminum Tri-Lobe dry sump oil pumps have been developed with their decades of oiling system expertise to provide you with a lighter, better performing design that will save weight and make more crankcase vacuum. They feature Tri-lobe aluminum scavenge sections with individual timing gears to ensure proper clearance at the highest rpm. The pumps use a spur gear pressure section based on Moroso's highly successful billet wet sump pump design, and variable spring rates optimize your oil pressure for smooth, reliable oil pressure readings. Moroso Tri-Lobe dry sump oil pumps have multiple -12, or -16 AN scavenge outlet options, weigh about half as much as gerotor pumps, and take up to 40 percent less power to drive.

4.5 out of 5 stars ( 2 )

$2,925.99

—

$2,969.99

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

On Sale

Holley Ford Mid-Mount Accessory Drive Systems

Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance

Not Yet Reviewed

$2,510.95

—

$2,612.95

$2,258.95

—

$2,350.95

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

ATK High Performance Ford 302 375 HP Stage 1 Long Block Crate Engines

Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor

Not Yet Reviewed

$4,765.99

Chevrolet Performance 454 C.I.D. Bare Engine Blocks

Direct from Chevrolet Performance are these 454 c.i.d. bare engine blocks. These are special Gen. VI bare iron blocks with 4.25 in. cylinder bores with 4-bolt main bearing caps. They have machined fuel pump pads, a one-piece rear main seal design, and standard 454 deck height. The maximum cylinder bore on these blocks is 4.25 in. plus .060 in. O.S., and will require the "Gen V/GenVI" design one-piece oil pan.

4.89 out of 5 stars ( 9 )

$2,672.08

ATK High Performance GM 350 Vortec 350 HP Stage 3 Long Block Crate Engines

Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

5.0 out of 5 stars ( 1 )

$4,624.99

Dart Big M Sportsman Big Block Chevy Cast Iron Bare Blocks

The foundation for a better big block build begins with Dart Big M Sportsman Big Block Chevy cast iron bare blocks. Dart engineered the Big M to be the strongest, most reliable, and easiest to build big blocks on the market. The Dart Big M Sportsman blocks feature: * Standard 9.800 in. and tall 10.200 in. deck heights available for Stroker engines * Standard 4.250 in., 4.500 in., or 4.600 in. bore sizes with Siamesed extra thick cylinder walls to resist cracking and improve ring seal (minimum .300 in. thick with 4.625 in. bore) * Uses +.300 in. tall Gen VI style lifters. Modifications for Gen IV style are also available * Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to equalize temperatures * 4-bolt ductile iron main caps have splayed outer bolts for extra strength * True priority main oil system lubricates the main bearings before the lifters * Oil filter pad is drilled and tapped for an external oil pump * Lifter valley head stud bosses prevent blown head gaskets * Rear main cap uses standard oil pump and two-piece seal, no adapter required * Mechanical fuel pump boss, clutch linkage mounts, and side and front motor mounts simplify installation in chassis * Dual oil pan bolt patterns fit standard and notched oil pans * Coated cam bearings, freeze plugs and dowels not included * Small bore 396 version available

5.0 out of 5 stars ( 1 )

$3,599.99

World Products Merlin Gen VI Engine Blocks

World Products has improved virtually every area of the new Merlin Gen VI engine blocks, producing one of the most technologically advanced and best-performing iron BBC engines available today! New features on these big block Chevy engines include thicker main webs for increased strength and thicker cylinder walls (nominally .250 in. @ 4.600 in. bore). They can utilize OE roller lifters or +0.300 in. tall aftermarket tie bar lifters. The World Products Merlin Gen VI engine blocks also include a standard Mark IV fuel pump boss for those wanting to keep a mechanical fuel pump.

5.0 out of 5 stars ( 1 )

$3,842.02

BluePrint High Torque GM 377 C.I.D. Base Stroker Long Block Crate Engines

BluePrint high torque GM 377 c.i.d. base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 9.1:1 compression hypereutectic pistons. The full roller camshaft provides 0.481 intake/0.480 exhaust lift with 187 intake/193 exhaust duration at .050 with a 97 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off. We purchased the last of these new-in-the-box engines from Blueprint. This means we cannot extend a warranty from the manufacturer; however, we do offer our standard 90-day handshake guarantee. This is a last chance opportunity, once they're gone we won't be able to order more--so grab one while you can! Engine specifications: * All new and dyno tested 377 c.i.d. small block Chevy compatible engine * Cast crankshaft with hypereutectic pistons * 4.000 in. bore and 3.750 in. stroke * Aluminum heads with 67cc chamber, 1.500 in. exhaust, and 1.940 in. intake valve * Accommodates 8- or 12-bolt intake manifolds * Requires electric fuel pump (not machined for mechanical fuel pumps) * Harmonic balancer included

4.0 out of 5 stars ( 2 )

$4,799.99

AFR 195cc SBF Renegade Competition Cylinder Heads

Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.

5.0 out of 5 stars ( 1 )

$2,691.00

Brodix Cylinder Heads IK 215 Cylinder Heads for Small Block Chevy

Brodix offers IK 215 Series cylinder heads for small block Chevy 350 and 400 engine applications—focusing on the only two things that matter: performance and price! They include a revolutionary ultra casting, versatile intake ports designed for optimum versatility, and combustion chambers that allow the use of several types of fuel. Standard features are A-356 virgin aluminum alloy, phosphorous bronze valve guides, valve seats for use with unleaded fuel, ends milled and drilled for accessories, and a straight spark plug angle. These are the most affordable high-quality aluminum cylinder heads on the market. The hassle-free top-end combo kits include: * Complete cylinder heads * Intake manifold (4150 Series) * Valve covers * Headbolts and washers * Intake bolts and washers * Valve cover studs and nuts * Head gaskets * Intake gaskets * Exhaust gaskets * Carburetor gaskets * Valve cover gaskets * Spark plugs * Brodix hat IK Series 23-degree cylinder head details: * Standard valve cover pattern * 64 cc / 70 cc combustion chambers * Straight spark plugs * Ends milled and drilled for accessories * Ductile iron valve seats for use with unleaded fuel * CNC-ported combustion chambers available as large as 75 cc

Not Yet Reviewed

$3,330.99

World Products Motown Race Engine Blocks

World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.

4.0 out of 5 stars ( 1 )

$4,549.46

United Engine and Machine Speed of Air Hyperformance Piston and Ring Kits

United Engine and Machine Speed of Air Hyperformance piston and ring kits are offered for a wide range of Chevrolet, GMC, and Ford vehicles. Speed of Air's peerless engine technology enables internal combustion engines to operate with better fuel efficiency, better performance, and with substantially decreased emissions output. These kits are available in a variety of bore, stroke, rod, dish options and include dark bronze/gold Cerakote coating. Increase your ride's available power and torque with a set of Hyperformance pistons and rings.

Not Yet Reviewed

$2,422.37

—

$4,485.01

Edelbrock E-CNC 355 Cylinder Heads

Edelbrock E-CNC 355 cylinder heads afford you the ultimate in performance! E-CNC 355 heads are fully CNC-ported to make more horsepower and torque in your high performance street or entry-level race application. Edelbrock cylinder heads are made in America and come available either bare or assembled. Improved airflow and modified spark plug angles that increase fuel efficiency and maximize power are just part of the overall performance potential you'll experience with Edelbrock E-CNC 355 cylinder heads.

Not Yet Reviewed

$2,725.50

Standard Motor Diesel Injection High-Pressure Oil Pumps

Standard Motor diesel injection high-pressure oil pumps (HPOP) deliver oil to the fuel injectors, which operate hydraulically to ensure superior performance. These oil pumps are the product of an in-depth remanufacturing process that includes inspection, tear down and validation, cleaning, reassembly, and testing. Order the model recommended for your vehicle.

5.0 out of 5 stars ( 1 )

$2,091.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.76 out of 5 stars ( 74 )

$2,023.99

—

$4,904.99

COMP Cams XFI NSR Ford 5.0 Modular 4V Camshafts

COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!

Not Yet Reviewed

$2,013.95

All American Billet Serpentine Kits

All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.

4.0 out of 5 stars ( 16 )

$2,195.00

—

$3,044.95

All American Billet Silverline Series Serpentine Kits

All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.

4.43 out of 5 stars ( 7 )

$2,595.00

—

$3,144.95

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.63 out of 5 stars ( 8 )

$2,988.99

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$2,997.99

VEGE Chevrolet 350 C.I.D. Remanufactured Long Block Crate Engines

If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon

3.72 out of 5 stars ( 25 )

$2,899.99

40 Results Found For "fuel"