Engines & Components - controller KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Summit Racing™ Pro LS 6.0L Rotating Assemblies

Summit Racing™ Pro LS 6.0L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

5.0 out of 5 stars ( 8 )

$2,574.87

—

$2,803.87

Summit Racing™ Pro LS 6.2L Rotating Assemblies

Summit Racing™ Pro LS 6.2L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,574.87

—

$2,809.87

Summit Racing™ Pro LS 5.3L Rotating Assemblies

Summit Racing™ Pro LS 5.3L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

Not Yet Reviewed

$2,599.87

—

$2,802.87

Summit Racing™ Pro LS 5.7L Rotating Assemblies

Summit Racing™ Pro LS 5.7L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,601.87

—

$2,804.87

Dart Iron Eagle Mopar Gen III Cast Iron Bare Blocks

Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings

Not Yet Reviewed

$4,610.99

Dart Pro 1 Aluminum Cylinder Heads

Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.

3.8 out of 5 stars ( 10 )

$2,497.64

Scat Forged Pro Series Lightweight Crankshafts

Scat's Pro Series lightweight crankshafts are forged 4340 steel yet have profiled counterweights to reduce weight for increased power—and that makes them great for achieving faster rpm curve! Scat recognized that a lighter crank that maintains its strength will let the engine rev quicker and make more horsepower and torque. The less weight you're trying to turn the better—and the less weight in the car, the better. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance.

Not Yet Reviewed

$2,286.99

—

$2,837.99

EMPI H.D. Bubble Top Engine Cases

EMPI H.D. Bubble Top engine cases are made of all new construction with numerous design features added in right from the start making them a strong and more reliable base for your next build. Each case features a raised roof, strong radius design that adds strength and allows clearance for up an 86mm stroker crank. Head studs are available in either 8mm or 10mm ensuring your choice of cylinder head is covered. Every EMPI H.D. Bubble Top engine case is fully CNC machined following strict quality control standards ensuring accuracy every step of the way. When starting your next engine, start with confidence with EMPI H.D. Bubble Top engine cases.

Not Yet Reviewed

$2,009.15

—

$2,111.70

Jesel Pro Series Tie-Bar Roller Lifters

Whether you are into drag racing, circle track, road racing, marine, or just running a serious piece on the street, Jesel Pro tie-bar roller lifters are built to go the distance! Manufactured to the highest standards using the strongest materials available, lifter components are machined in-house, allowing Jesel the ability to control the finish and hold critical tolerances which far exceed current industry standards. Choose the proper fit for your application. Features and benefits: * Heat-treated 8620 bodies are DLC coated to reduce friction and body wear * .842 in. up to .937 in. diameters are available covering all popular OE and aftermarket blocks * Heat-treated stainless steel tie-bars keep lifter precisely aligned through the lift cycle * Tie-bars are retained to the bodies using Jesel designed tool steel nuts * Cam rollers with precision sorted needle bearings (standard) * Pressurized oiling to the axle assembly * Heat-treated and polished tool steel roller * Offset or on-center pushrod seats available * Optional bronze bushed cam rollers available

Not Yet Reviewed

$2,125.00

World Products Motown Race Engine Blocks

World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.

4.0 out of 5 stars ( 1 )

$4,549.46

Callies Compstar Sport Series Crankshafts

Callies Compstar Sport Series crankshafts are intended for high-rpm, high-output engines. They are finished with the same care and detail as the entire line of Compstar crankshafts, including Callies' stringent quality control final check. All Sport Series crankshafts by Compstar are balanced and ready for assembly, and they feature the best metallurgy and heat treatment on the market today. Choose the ideal crankshaft designed for your vehicle's engine.

Not Yet Reviewed

$3,140.00

—

$4,612.00

Scat Forged Standard Weight Crankshafts

Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.

4.46 out of 5 stars ( 26 )

$2,705.99

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate

5.0 out of 5 stars ( 4 )

$4,210.99

ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines

Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.69 out of 5 stars ( 16 )

$3,099.99

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.78 out of 5 stars ( 9 )

$2,988.99

ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines

Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.0 out of 5 stars ( 6 )

$3,034.99

ATK High Performance GM 350 345 HP Stage 2 Long Block Crate Engines

Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 2 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 2 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 cylinder heads * ATK dual plane intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly rings * Hydraulic roller camshaft .495in/.502ex 110LSA * Stamped steel 1.5 ratio rocker arms * HEI distributor, plug wires and plugs * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate

5.0 out of 5 stars ( 2 )

$3,635.99

ATK High Performance Ford 302 375 HP Stage 1 Long Block Crate Engines

Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor

Not Yet Reviewed

$4,765.99

ATK High Performance GM 350 330 HP Stage 2 Long Block Crate Engines

Give your ride new life with these ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 2 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. ATK GM 350 330 hp Stage 2 crate engines include the following: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * ATK dual plane intake manifold * OE crankshaft * PowerBond 8 in. balancer * OE 5.7 in. powder metal connecting rods * Hypereutectic flat top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * 168 tooth flexplate

3.4 out of 5 stars ( 10 )

$3,750.99

COMP Cams Thumpr NSR Ford Coyote 5.0 Modular 4V Camshafts

COMP Cams Thumpr NSR Ford Coyote 5.0 modular 4V camshafts present big power gains, along with the distinctive Thumpr idle lope—and you don't need to upgrade the valve springs. Ford 5.0L modular 4-valve V8 engines have become hugely popular, so how do you improve upon already great performance? With a camshaft from the COMP Cams family of Thumpr NSR camshafts! Choose the cam model (Thumpr or Mutha' Thumpr) designed for your vehicle and engine application. Features include: * Brings legendary Thumpr sound to the 5.0 Coyote * Optimized lobe profiles for increased airflow and exhaust efficiency * Big performance gains in mid- to upper-rpm range * Valve spring upgrade not required * One-piece billet steel construction * Compatible with N/A and supercharged applications

Not Yet Reviewed

$2,013.95

—

$2,046.95

COMP Cams Xtreme XE-R Series Modular 4V Camshafts

COMP Cams Xtreme XE-R modular 4-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. They are built to take advantage of the latest cam technology, to provide maximum performance.

5.0 out of 5 stars ( 2 )

$2,134.95

COMP Cams Xtreme RPM Series Modular 4V Camshafts

COMP Cams Xtreme RPM Series modular 4-valve camshafts have been designed to increase horsepower and extend the rpm range of your engine. From stock replacements to ultimate performance, there is an Xtreme RPM cam to meet your performance goals.

Not Yet Reviewed

$2,134.95

36 Results Found For "controller"