Availability
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 74 )
$21.99
—
$29.99
Moroso's universal dipstick kits are designed to work with Moroso and other brands of oil pans with a built-in 1/4 in. NPT dipstick provision. Moroso dipsticks feature a universal mounting tab that can be bent or modified to accommodate a wide variety of engine compartment clearances and mounting locations. The dipstick seals to the tube with an O-ring that secures it in place and prevents crankcase gasses from escaping. Moroso universal dipsticks also feature "full" and "fill" marks which can be used as-is, or new marks can be added to indicate your desired engine oil level.
( 85 )
$31.99
Moroso timing pointers feature up to four degrees of adjustment for the best fit. They are manufactured from billet aluminum and have a black anodized finish applied for maximum corrosion resistance. The pointers have a unique smaller shape to hug the harmonic balancer for better, more accurate readings. Moroso timing pointers also include Allen head, countersunk stainless steel mounting hardware for installation.
( 62 )
$39.99
—
$47.99
Replace a worn out or old rear oil passage plug with Moroso oil galley barbell plugs. Your vehicle's old plug could be allowing dirty engine oil to bypass the oil filter. Moroso's improved design features a secondary O-ring to seal dirty oil from flowing to the engine bearings. These dog bones also have a smaller shaft diameter than the OEM piece to minimize any flow restriction. Moroso's oil galley diverters are machined from billet aluminum, not plastic like the original OE piece, and are supplied with quality, high-temperature rated Viton® O-rings to withstand all types of engine oils and compression cycles. Whether you call them passage plugs, dog bones, or barbells, these Moroso components can be easily removed from the engine block once installed with its 4mm threaded hole.
( 4 )
$22.99
—
$23.99
Professional engine builders are familiar with camshaft walk. Excessive camshaft end play can produce erratic spark timing and the movement of the timing chain/gear can destroy the timing cover. Moroso has solved this problem with a wear resistant cam stop button that mounts in an aluminum holder, which bolts to the cam gear by way of a retaining plate. These button assemblies do not allow the cam to walk forward, stabilizing ignition timing and preventing costly engine damage.
( 18 )
$25.99
Moroso extra long bellhousing dowel pins provide an easy method of properly aligning the transmission input shaft to the crankshaft pilot bearing. They are extra long to simplify the task of placing the bellhousing on the engine block. Proper alignment provides a clean clutch release, maximum pilot bearing and transmission life, and reduces shifter problems.
( 72 )
$20.99
—
$27.99
Help your engine breathe better with Moroso valve cover filtered breathers. They are available in half-hooded styles for extra protection from dirt and debris, and non-hooded designs for when that added shielding isn't necessary. Both styles provide serious protection against dirt and airborne debris without restricting airflow. These breathers also come in either a push-in or clamp-on style; both are cleanable and reusable.
( 20 )
$23.99
—
$39.99
Moroso Performance Products manufactures a complete line of heavy-duty oil pump intermediate shafts. These shafts are made of high-quality steel for extended reliability. The steel sleeve is pinned to maintain correct alignment between the oil pump and the shaft.
( 15 )
$27.02
—
$34.77
Moroso engine oil accumulator mounting brackets will allow you to mount your accumulator anywhere you need to. They are designed to be bolted to any flat surface and include the required T-bolts for NHRA acceptance.
( 3 )
$41.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$20.99
—
$52.99
Moroso drive mandrel spacer kits aid you in pulley alignment for your SBC applications. They maintain the register of the mandrel when using a 1/4 in. thick crank trigger. Spacers are constructed of stress-proof steel with a black oxide finish, and come with a 1/4 in. longer crankshaft bolt.
( 1 )
$26.99
—
$53.99
Moroso replacement check valves are direct replacement parts for the crankcase evacuation system. They will thread onto the weld-in nipple, and allow you to clamp on your rubber hose that's going to the valve cover breather.
( 5 )
$30.99
Moroso offers several different drain plugs to fit their oil and transmission pans, as well as other brands. The plugs come in different thread sizes and are made from quality materials with chrome, zinc, or anodized finishes. Many feature extra-strength rare earth magnetic tips to hold metal particles and some include a copper or nylon washer, or rubber O-ring. When you need a replacement plug for your pan, choose one from the variety available from Moroso.
( 4 )
$20.99
Moroso oil filter pre-screens are designed to fit between the filter and block. The screens are made of 304 stainless steel, and can trap small particles in the mesh before they reach your engine oil.
( 3 )
$27.99
Moroso oil pan stud kits make pan installation easy and prolong gasket life. Locking nuts feature attached washers with serrated faces to provide a positive grip on the pan rail. The studs are made of heat-treated Grade 8 steel with black oxide finish, and cadmium and zinc plated nuts. These are also available in a bullet nose version which are rounded on one end for easier starting of oil pan mounting nuts.
( 19 )
$24.40
—
$45.99
When good looks are important, Moroso chrome oil filters are the way to go. Outside is a triple process, chrome plated steel housing that's hand-polished and then rack-nickled before chroming to ensure the highest luster possible. Inside is a heat-cured, resin-impregnated element that exceeds OEM specifications for filtration efficiency.
( 22 )
$32.72
—
$35.99
Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.
( 9 )
$33.99
These Moroso extra long valve cover wing nuts are available in chrome plated steel or your choice of powdercoated or anodized aluminum colors. They include matching studs to eliminate gaskets alignment problems and to speed installation.
( 18 )
$31.99
—
$52.99
Moroso weld-on filler cap kits are universal to "fill" many needs. They can be used on power steering tanks, radiator overflow tanks, rear-ends, and valve covers—as well as other locations to replenish fluid or to serve as inspection ports. These kits include either a steel or aluminum weld-in bung with O-ring for leak-free sealing, and an aluminum cap with the Moroso logo (plain cap also available).
( 9 )
$51.99
When roller rocker arms are installed, along with a mechanical lifter cam, the amount of oil flow required to the valvetrain is greatly reduced. Installing Moroso oil restrictor kits limits this unnecessary oil flow. These kits reduce the power-robbing windage created from the excess oil draining past the rotating assembly and keeps the oil flowing where it is needed most, the rod and main bearings.
( 21 )
$23.99
—
$41.99
Moroso oil return screen kits trap metal fragments and loose contaminants before they can cause valvetrain failure, saving you considerable money for repairs on vital engine parts. The kits feature stainless steel screens that fit over the oil drain back holes in the lifter valley, and are held in place with the included epoxy. Depending on the kit your select, oil plug returns may also be included. Moroso oil return screens are available for vehicles spanning six decades.
( 5 )
$31.47
—
$42.99
Moroso replacement accumulator O-rings are designed to seal up your accumulator to provide the correct operating pressure. They are manufactured from high-quality rubber and are tough enough to stand up to high oil pressure.
( 4 )
$20.99
Moroso one-piece push-in valve cover breathers are designed to drain oil trapped in their foam filter elements back into the valve covers, rather than allow it to drain out of the air vents or get into the air cleaner. These breathers are available in several colors and finishes. They'll fit all Moroso valve covers, as well as any other covers with a 1.22 in. hole. Some have 90 degree nipples to feed vapor into the air cleaner, and an installation grommet is included.
( 36 )
$25.99
—
$53.99
Moroso breather tanks are great for low vacuum venting. They're offered in a choice of sizes to suit your application needs, and may be modified for additional fitting for dual vent hoses. These high-strength, lightweight aluminum breather tanks feature a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve.
( 108 )
$53.99
Modal Header