Engine Works Engines & Components - In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Engine Works High-Tensile Strength Head Bolt Kits

High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.

Not Yet Reviewed

$44.96

—

$49.96

Engine Works Camshaft Retainer Plates

Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.

Not Yet Reviewed

$21.86

Engine Works Timing Covers

Engine Works offers timing covers in a variety of styles for many Chevy and Ford engine applications. The one- or two-piece covers are available in stamped steel or diecast aluminum—in multiple finishes. These replacements are essential in protecting the timing belt, timing chain, or cam belt of your vehicle from road debris, grime, and gravel. Order the model recommended for your ride.

Not Yet Reviewed

$23.71

—

$36.21

Engine Works Rocker Arm Studs

Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.

Not Yet Reviewed

$31.24

—

$43.71

Engine Works Camshaft Locking Plates

Engine Works offers camshaft locking plates to keep your cam and timing gear locked securely together. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. Each plate is stamped from cold steel, features bendable tabs to lock the cam bolts in place and is finished in black oxide. Kit comes with zinc alloy 150,000 psi bolts to lock the cam plate into place after they're torqued to spec. Order the cam locking plate recommended for your make/model.

Not Yet Reviewed

$28.71

Engine Works Engine Finishing Kits

Save time and money with Engine Works engine finishing kits. During an engine tear down and the cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Engine Works offers many of the hard-to-find OEM service parts you need in each engine hardware finishing kit. Available for small and big block Chevrolet and small block Ford engines, all hardware in each engine finishing kit is manufactured to precise OEM dimensions to make engine assembly easy.

Not Yet Reviewed

$38.71

Engine Works Billet Timing Pointers

Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible

5.0 out of 5 stars ( 1 )

$33.71

Engine Works Polylocks

Engine Works rocker arm and stud girdle polylocks are manufactured from high-grade alloy steel, finished in black oxide, and feature cold-formed 12-point reduced heads for quick R and R. The bottom of each one incorporates a .550 in. step that centers the polylock on the trunnion of the rocker arm, and they are available in both 7/16 in. and 3/8 in. sizes. The stud girdle polylocks have a .950 in. long shank. Choose the size you need.

5.0 out of 5 stars ( 1 )

$42.46

Engine Works Claimer Series Pushrods

Engine Works offers Claimer Series pushrods for a wide range of Chevy, Ford, and GM LS applications from the 1950s and up. The .060 in. wall rods are machined from 1010 heat-treated steel with welded ball tips. Designed for street/strip use, these replacements are 30 percent stronger than OE and are guideplate compatible. They're available in a variety of diameters and lengths.

Not Yet Reviewed

$33.71

—

$47.46

Engine Works Lifter Valley Vents

Engine Works lifter valley vents help control oil flow to cam and lifters and holds down camshaft oil windage. Crafted from T-6 aluminum, they are 2 1/4 in. long. Note: Factory vent holts must be tapped to 1/4 in.

Not Yet Reviewed

$37.46

Engine Works Valve Spring Locators

Engine Works valve spring I.D. locators and O.D. cups are made from 4140 chromoly. Available in various sizes, select the ones with the specs needed to ensure stable valvetrain operation.

Not Yet Reviewed

$46.21

—

$49.96

Engine Works Valve Locks

For three decades, Engine Works has delivered a comprehensive portfolio of high-quality, high-value, and high performance products for racers, engine builders, and weekend gearheads. These valve locks are machined from billet steel and are designed for stock or performance engines using 10 degree valve retainers. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, Engine Works locks offer excellent valve spring location and will provide the reliability you need.

Not Yet Reviewed

$28.71

—

$38.71

Clearance

Engine Works Guideplates

Engine Works offers guideplates for a wide range of applications, including many Chevy and Ford engine applications from the 1950s and up. These replacements are pressed from heat-treated steel and finished in a black oxide coating. They're available in flat or raised style, in 5/16 or 3/8 in. diameter.

Not Yet Reviewed

$20.31

—

$33.71

Engine Works Sportsman Series Timing Sets

Engine Works Sportsman Series timing sets are available in single- or double-roller options for Chevy, Ford, and Chrysler big block and small block engines. Order the replacement set recommended for your application. Details below: * Double roller models: -- .200 in. diameter double roller chain -- Cast iron cam sprocket -- 3-keyway crank sprocket with +/- 4 in. cam adjustment * Single roller models: -- Very large .334 in. diameter seamless single roller chain -- Cast iron cam sprocket -- 3-keyway crank sprocket with a +/- cam adjustment -- Heat-treated crank sprocket with black oxide coating

5.0 out of 5 stars ( 1 )

$42.63

Engine Works P-Series Main Bearing Sets

Engine Works offers quality P-Series main bearing sets They are crafted from premium metals and feature oil grooves and designed for direct replacement and performance Keep friction low and performance high with bearings from Engine Works.

Not Yet Reviewed

$21.21

—

$36.21

Engine Works Valve Spring Shim Kits

To help achieve the correct, and critical, valve spring installed height for your project, use Engine Works valve spring shim kits. As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. That's why Engine Works offers these sets of valve spring shims to solve this problem and eliminate failures. The hardened spring shims come in a variety of inside diameters, outside diameters, and thicknesses to better suit your engine's specific needs.

Not Yet Reviewed

$28.71

Engine Works Cylinder Head Dowel Pins

Engine Works cylinder head dowel pins ensure alignment between the cylinder head and block. These small cylindrical components are available in different quantities for small block, big block, and LS engines. Select the ones needed for your engine assembly.

Not Yet Reviewed

$21.21

—

$22.44

Engine Works Valve Spring Retainers

Engine Works carries a large assortment of valve spring retainers to successfully hold the valve spring and valve spring keeper securely in place on your valve stems, ensuring proper valve spring pressure. Made from strong, heat-resistant materials, either 4140 chromoly steel or 6AL-4V titanium, the retainers are produced using electronically controlled TRAUB machines for accuracy to .001 in. Select the retainers with the specs to fit your valve springs.

Not Yet Reviewed

$41.21

—

$49.96

Engine Works Lifter Guides

Engine Works hydraulic roller lifter guides are the newer design LS2 trays used in all current LS builds (except for the active cylinder management engines). These plastic guides feature increased support in the design. They're available in a set of 4.

Not Yet Reviewed

$48.71

Engine Works Rod Bearing Sets

Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.

Not Yet Reviewed

$21.21

Engine Works Heavy-Duty Valve Springs

Engine Works heavy-duty valve springs are crafted from Vanadium-Elector ultra clean material for longevity and reliability under rigorous high-RPM conditions. Each valve spring set undergoes batch testing for consistency, ensuring precise performance matched within 10 percent of the stated spring rate. Engine Works spares no detail in the manufacturing process, with each spring meticulously precision-wound, ground for tolerance, and stress-relieved for enhanced durability. With a legacy spanning over 25 years, Engine Works remains a trusted name in the performance and racing industry. Order your set today!

Not Yet Reviewed

$48.44

Engine Works Timing Cover Fasteners

Some fasteners have a specific purpose, providing the best fit and performance for that purpose. Engine Works offers several timing cover stud and bolt kits to secure your individual timing cover. For your LS, the bolts feature a built-in washer face with case-hardened serrations designed to easily permit the use of a socket wrench for quick and accurate installation. For your small or big block timing cover, Engine Works offers steel bolt or stud kits. The studs have a black oxide finish, a bullet point for easier cover installation, and include lock nuts. The bolts are natural steel. Select the kit with the right for your engine.

Not Yet Reviewed

$24.74

Engine Works Oil Pan Stud Kits

Some fasteners have a specific purpose, providing the best fit and performance for that purpose. Engine Works oil pans stud kits will mate with the specified oil pan applications for a secure, leak-free fit. The Grade 8 studs feature a black oxide finish and a bullet point for easier pan installation. The kits include lock nuts. Select the kit with the right quantity for your engine.

Not Yet Reviewed

$43.71