Availability
Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder
( 1 )
$1,574.99
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$1,075.00
—
$1,399.99
With 24 degree OEM X275 class accepted valve angles, 119cc heart-shaped combustion chambers, 0.300 in. raised intake ports, and aerospace casting technology, Pro-Filer big block Chevy Sniper cylinder heads are ready to rumble. They're available with 290cc, 320cc, or 370cc intake ports flowing to 400cfm as cast, steel, or copper valve seats, and accept up to 1.625 in. O.D. springs. For powerful out-of-the-box performance, install Pro-Filer Big Block Chevy Sniper cylinder heads.
Not Yet Reviewed
$1,363.43
—
$1,499.95
Billet Specialties LS Modular valve covers offer a unique solution for hiding your LS coil packs. The valve covers are a 2-piece design that bolts together to make one cover. The base features mounts for the ignition coils, a hidden oil fill, and a 1/4 in. NPT provision for breathers or PCV in the rear of the cover. The top piece bolts to the base with polished ARP fasteners, perfectly covering the coil packs for a seamless look. Holes are provided in the side of the covers for the spark plug wires. These covers are machined from a solid piece of aluminum and are available in a variety of finishes and top styles (ribbed, logos, etc.). LS Modular valve covers are ignition coil-specific to accommodate multiple styles of coil packs. Order the model designed for fitment with your vehicle and engine application.
( 1 )
$1,569.95
Moroso billet aluminum valve covers are CNC-machined from a billet aluminum bar to make them lightweight without sacrificing strength. Their airtight sealing allows the engine to pull greater vacuum for improved ring seal and power. The covers are available plain or with the Moroso logo, natural or black anodized—and mount with either a centerbolt or perimeter bolts. Order the pair designed for fitment with your vehicle and engine application.
( 2 )
$1,542.99
Once you see Trick Flow® PowerPort® 240 heads for big block Mopar in action, you'll agree they are the only aftermarket aluminum heads worth using on your engine! What makes PowerPort® 240 heads so great? For starters, they're made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers then fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. Fully profiled combustion chambers and CNC Street Ported runners guarantee proper dimensional accuracy and balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 240 heads over stock heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10 degree steel valve stem locks. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 240 heads to accomodate all factory-style big block Mopar pistons. They are also manufactured to accept aftermarket roller rocker arms, intake manifolds, and headers. They are available fully assembled or as bare castings. Sold individually.
( 29 )
$1,149.99
—
$1,549.99
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 22 )
$1,152.95
—
$1,545.95
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,470.97
—
$1,505.97
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$1,007.00
—
$1,218.00
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$1,152.95
—
$1,676.95
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,625.50
Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 170 head. Trick Flow® Twisted Wedge® 11R 170 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge®-specific pistons. New high-velocity, race-inspired CNC street ported runners have been optimized for today's popular bore and stroke combinations, and have a standard resolution surface finish for significant performance gains. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure exceptional quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 170 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 8 )
$1,144.99
—
$1,299.99
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,034.95
—
$1,645.95
Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.
( 1 )
$1,539.98
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$1,249.99
—
$1,274.99
Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle
Not Yet Reviewed
$1,239.99
—
$1,524.99
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 4 )
$1,644.95
—
$1,784.95
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound that you demand, COMP Cams' engineering team proudly introduces the Thumpr Series hydraulic roller cam and lifter kits. They are designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. They're designed to maximize the rough-idling characteristics of the cams, giving you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. They are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits feature a cutting-edge hydraulic roller design that delivers a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 16 )
$1,136.95
—
$1,676.95
Trick Flow PowerPort® 290 cylinder heads for Ford 429/460 engines deliver significant horsepower and torque gains over similar-style cylinder heads. The heads have Fast As Cast® runners that duplicate the port shape and profile of CNC-ported heads for near-CNC-ported power and performance for about the same price as regular cast cylinder heads. Other features include an extremely efficient chamber design for more complete combustion and exhaust ports raised .270" from stock for increased airflow, Trick Flow PowerPort 290 cylinder heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,149.99
—
$1,599.99
Transform your LS1 into a powerhouse! Trick Flow® GenX® 220 cylinder heads for GM 5.7L LS1 engines are a great value in performance. The cathedral port heads incorporate features of Trick Flow® fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as their competition ported heads. The special Fast As Cast® runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5 degree valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$1,099.99
—
$1,149.99
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$1,222.95
—
$1,236.95
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
Get the most out of your high performance engine with these Isky Red-Zone EZ-Roll roller lifters. Your lifters have to take a lot of abuse between radical cam profiles and serious spring pressures, so going with anything less than the toughest available would be a mistake. These Isky Red-Zone EZ-Roll lifters are designed from the ground up with the latest technologies to withstand what your all-out performance engine can throw at them. Isky replaced the traditional needle bearings with the tough-wearing, low-friction Epsilon-Z solid bearing raceway that better distributes the forces, resulting in much more even wear. Add the advanced full spectrum three-point oiling system that provides a continuous oil supply to the bearings and you end up with a lifter that will last, even when subjected to opening pressures of up to 750 lbs.! Spend less time rebuilding your engine and more time doing what you love by upgrading to these Isky Red-Zone EZ-Roll roller lifters!
Not Yet Reviewed
$1,342.99
—
$1,441.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
