Availability
S&S Cycle 124 in. low compression Hot Set-Up cylinder kits package a piston kit with cylinders for Big Twin engines with stock cylinder heads. The pistons are a dished dome design and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. stroke flywheels, resulting in 124 in. displacement
Not Yet Reviewed
$1,285.95
S&S Cycle Performance cylinder heads are replacements for Big Twin engines. Designed to be compatible with a stock-style flat topped piston, their larger than stock intake and exhaust valves provide plenty of air while maintaining port velocity for good low and midrange response, while the S&S high-lift valve springs allow the installation of cams with up to .585 in. lift. S&S Cycle Performance cylinder heads are compatible with stock intake manifolds, exhaust systems, and temperature sensors for EFI-equipped models. Select low or standard compression heads with a natural aluminum or wrinkle black powdercoat finish for your Big Twin engine. * Low compression sets have a slightly larger 82cc combustion chamber, making them ideal for larger displacement applications, producing a manageable compression ratio. These heads are original equipment on S&S V96 and V80 engines. * Standard compression sets have a 76cc combustion chamber that gives a slight increase in compression for great results with most performance cams.
Not Yet Reviewed
$1,285.16
—
$1,553.95
S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern
Not Yet Reviewed
$1,381.46
—
$1,599.95
Moroso billet aluminum valve covers are CNC-machined from a billet aluminum bar to make them lightweight without sacrificing strength. Their airtight sealing allows the engine to pull greater vacuum for improved ring seal and power. The covers are available plain or with the Moroso logo, natural or black anodized—and mount with either a centerbolt or perimeter bolts. Order the pair designed for fitment with your vehicle and engine application.
( 2 )
$1,542.99
Trick Flow® PowerOval® 280 cylinder heads for big block Chevy are an ideal upgrade from factory cast iron heads for street/strip and marine applications. They feature an oval intake port design that produces excellent low and midrange torque and horsepower, plus Fast As Cast® runners for near-CNC-ported performance for about the same money as standard cast heads. Efficient heart-shaped, CNC-profiled combustion chambers have CNC bowl blended valve seat transitions to promote high velocity and huge airflow volume, plus 24 degree valve angles with 4 degree side cants to further increase airflow. Other features include .300 in. raised exhaust ports, and extra-thick decks and walls for porting. Trick Flow® PowerOval® 280 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 4 )
$1,399.99
—
$1,599.99
Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.
( 29 )
$1,329.99
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 57 )
$1,002.99
—
$1,625.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$1,249.99
—
$1,274.99
Summit Bucks
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$1,222.95
—
$1,236.95
March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.
( 51 )
$1,207.99
—
$1,567.99
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 4 )
$1,644.95
—
$1,784.95
March Performance Ultra Series Chevy Small Block serpentine systems bolt to the front of 1969 or later small block Chevy heads. Precision CNC-machined from solid billet 6061-T6 aluminum to fit perfectly and handle high torque and vibration, these bracket kits come complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. Powdercoated to eliminate polishing in those hard to reach places. Matching serpentine pulleys are precision CNC-machined from 6061-T6 aluminum. This is the same material March uses for NASCAR pulleys! These pulleys will not fracture like common cast pulleys. High tensile strength means much longer wear. March hard coats the high-wear areas on the high-water flow ratio pulleys! The street rod ratio increase water flow and fan speed. This helps at critical low speed driving.
( 10 )
$1,139.99
—
$1,148.99
Red-Zone EZ-Roll Max roller lifters are needle-free, solving the age-old dilemma of needle bearing overload. The extreme loading demands of all-out racing require advance load distribution. Ideal for the most extreme loading environments, these lifters carry far greater loads. Their needle-less roller bearing construction and greater surface area to load distribution footprint deliver a solid 350 percent higher load rating! Isky Red-Zone EZ-Roll Max lifters are an ultra-low friction, high-tech alternative to needle bearing lifters!
( 3 )
$1,235.99
—
$1,463.99
Summit Bucks
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$1,222.95
—
$1,236.95
Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.
( 2 )
$1,521.50
—
$1,560.50
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
Not Yet Reviewed
$1,099.99
—
$1,575.99
Holley's Ford 7.3L Godzilla high-mount accessory drive base kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$1,349.95
—
$1,549.95
Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.
( 7 )
$1,046.95
March Performance has created a solution for mounting accessory components on the popular Chevy LS motors where low hood clearance and narrow frame clearance is required. Precision CNC-machined from 6061 T-6 aluminum for strength and a perfect fit, pulley kit components are hard coated on high-wear areas for durability and powdercoated for a maintenance-free finish. An OEM-style tensioner ensures perfect belt tension and a canister-style power steering pump provides compact hydraulic pressure for power steering.
( 2 )
$1,578.99
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$1,589.70
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$1,082.00
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
Replace your low performance V-belt pulleys and brackets with performance serpentine kits from March. They feature March's all-billet performance pulleys and brackets, which are designed to free up extra horsepower, while eliminating the possibility of belt throwing.
( 16 )
$1,022.99
—
$1,103.99
With more than 70 years of experience, it's no wonder JE Pistons is the world's leader in high performance pistons. How do they stay in front? Easy—by constantly improving designs, materials, and production processes, using state-of-the-art machining techniques, and incorporating other methods to keep costs low. The result is a line of great, economically priced pistons with features such as radiused valve reliefs (where applicable), forced piston-pin oilers, diamond-turned skirts, gas ports, and more! These forged aluminum pistons are available in various styles and sizes for fitment with specific engine applications.
Not Yet Reviewed
$1,124.99
—
$1,349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
