Filters
Ford Performance Parts 2018 Gen 3 5.0L Coyote production cylinder blocks are original equipment for the 2018 Mustang GT 5.0L. They feature a plasma-transferred wire arc spray weld liner coating. This provides improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks. All Ford Performance 2018 Gen 3 5.0L Coyote production cylinder block features are finish-machined, including head deck and crank bore. Features and items: * 93.0mm bore * Cylinder bores are finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels
Not Yet Reviewed
$1,099.99
A Summit Racing™ 5.7L Hemi Gen III engine block is the perfect foundation to start your project or repair your daily driver. Each engine block undergoes a rigorous testing and machining process, including: Oven cleaning; testing for cracks through magnetic particle inspection; and main line honing. They're bored and honed with a torque plate, given a hot tank wash; cam bearing journals are line bored and cam bearings are installed; and the units receive a fresh coat of paint before final packaging and shipping. Start your project or repair off right with a Summit Racing™ 5.7L Hemi Gen III engine block.
( 4 )
$1,299.99
What a foundation for your build! Ford Performance Parts 7.3L Godzilla engine blocks offer enormous possibilities. These are production cast iron engine blocks as used in the 2020+ F250 Super Duty 7.3L. They have 107.2mm bore. Includes the following components: * Main bearing caps/hardware * Eight piston cooling nozzles * An oil pressure sender * Four cylinder head dowels * Two transmission dowels
( 2 )
$1,499.99
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
—
$1,435.46
S&S Cycle 95 in. big bore kits will increase the displacement of 88 in. engines to 95 cu. in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 95 in. big bore kit to take your bikes stock engine case as big as it'll go! S&S Cycle 95 in. big bore kit features: * Increases Twin Cam displacement from 88 in. to 95 in. with this S&S kit * Forged piston weight is virtually identical to stock, so no rebalancing is necessary * No crankcase machining required * Features the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Compatible with either OEM or S&S Cycle Super stock heads * Big bore 3 7/8 in. cylinders * 9.7:1 compression ratio with stock heads * Includes cylinders, pistons, rings, and gaskets required for installation
Not Yet Reviewed
$1,120.46
—
$1,131.26
S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,065.56
S&S Cycle 106 in. big bore kits will increase the displacement of 95 in. engines to 106 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 106 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 106 in. in. Big Bore kits: * The 106 in. big bore kits yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 3/8 in. stroke, 106 in. displacement, and 10:1 compression ratio with stock heads (9.7:1 compression ratio with S&S 89cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Even though stock cylinders can be bored to fit the 3.927 in. pistons, the included S&S cylinders feature a much stronger liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders * Kits include cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,065.56
—
$1,094.36
ATK High Performance Chrysler Gen III Hemi remanufactured bare blocks are an economical option for your build! They're fully machined and ready to assemble. Here are product details: ATK 220A Engine Specs: * Block: Machined GEN III Hemi 5.7L (2004-2008) * Bore: 3.927 in. (Pistons size vary, final honing may be required) * Displacement: 345 cubic inch * Main journal type: Mopar GEN III Hemi * Engine block material: Cast iron * Engine block style: OEM * Engine block deck height: Standard deck * Main bolt style: 2-bolt * Main caps included: Yes * Main cap material: Powdered metal * Main cap fasteners included: Yes * Main bearings included: No * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed * Camshaft bearing line boring in Standard * Pos 1: 2.2921 in. – 2.2931 in. * Pos 2: 2.2765 in. – 2.2775 in. * Pos 3: 2.2607 in. – 2.2617 in. * Pos 4: 2.2449 in. – 2.2459 in. * Pos 5: 1.7187 in. – 1.7197 in. * Main, line honed: 2.7522 in. - 2.7525 in. * Cylinder honing I.D.: 3.9270 in. - 3.9278 in. * Minimum deck height: 7.880 in. - 7.870 in.
Not Yet Reviewed
$1,319.99
S&S Cycle Super Stock alternator-style crankcases are perfect for stock replacement and high performance applications. Available in stock and different bore sizes, some are machined for the installation of a crank position sensor, but all are compatible with stock flywheel assemblies, primary covers, gear covers, and are clearanced for 38 amp alternator stators. Certain options may include the required hardware, fittings, and bearings, and may be offered in different finishes. Select the S&S Super Stock alternator-style crankcase designed for your motorcycle's engine.
Not Yet Reviewed
$1,456.16
—
$1,483.16
S&S Cycle Shovelhead cylinder sets for Big Twin engines are available in different sizes. They are made from high-strength engineering-grade gray cast iron with a durable powdercoat finish for excellent wear resistance. Select the cylinder set designed for your motorcycle engine.
Not Yet Reviewed
$1,070.95
—
$1,147.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
