Availability
Showing In Stock Items. Show All 38 Items.
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$1,412.99
—
$1,504.99
Innovators West camshaft belt drive systems feature an aluminum machined cover with billet machined finish, anodized precision-machined pulleys, and top-quality Super Torque belts. All models include an adjustable idler pulley eccentric for maintaining proper belt tension, and camshaft timing is externally adjustable via the 2-piece top pulley with a 10-degree range. Cam thrust is controlled with Torrington needle bearings.
Not Yet Reviewed
$1,172.90
Manley titanium valves feature forged one-piece construction with grain flow, not a head welded to a stem. These jewel-like valves are machined in state-of-the-art CNC turning centers and valve stem grinders to exacting tolerances. Manley utilizes the finest titanium alloys for both the intakes and exhausts, providing the best balance of mechanical properties, hardness, ductility, and fatigue strength at the given temperatures. All Manley titanium valves must pass their rigorous final inspection process, and strict quality control enables them to deliver parts within tight tolerance. Custom valves can be delivered within a very reasonable turnaround time. Seat coatings are also available on certain shelf stock part numbers, as well as on custom valves.
( 3 )
$1,158.62
—
$1,465.29
Howards Cams Rattler camshaft and lifter kits are designed for maximum performance. Utilizing the highest grade race quality cores available, the Rattlers are 100 percent Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. They're manufactured on dedicated high-precision CNC cam grinding machines, and the hydraulic lifters offer precision oil control. Howards Cams Rattler camshaft and lifter kits are ideal OE replacements, as well as for use in high performance racing applications.
( 25 )
$1,054.99
These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.
( 4 )
$1,241.10
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 4 )
$1,644.95
COMP Cams XFI NSR Camshafts for Ford 4.6L/5.4L modular 3-valve engines are the first truly "drop-in installation" camshafts ever created for this popular application – striking the perfect balance of performance versus installation difficulty. An excellent alternative to the regular COMP Cams Xtreme Energy Ford Modular camshafts, these 2-staged cam sets require no computer re-tuning; however testing has shown that mild tuning can result in power gains even greater than the normal 25 rear wheel horsepower. These camshafts are fully compatible with the factory variable cam timing (VCT) system and are designed to operate in the stock rpm range.
( 7 )
$1,028.95
COMP Cams Thumpr LS Master camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. These packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS Master camshaft packages include: * Thumpr LS camshaft * Lifters * Timing gear set * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
( 8 )
$1,288.95
—
$1,504.95
Trick Flow® takes the guesswork out of choosing the right cams and valvetrain upgrades for your Ford 4.6L/5.4L 2V modular engine with these Track Max® hydraulic roller camshafts and valve spring upgrade kits. Kit number TFS-K51802001 is perfect for naturally aspirated street engines operating in the 1,500-5,000 rpm range. Kit number TFS-K51802002 has an 1,800-6,500 rpm operating range and is ideal for mild street/strip engines with power adders using a maximum of 5-6 psi of boost. Kit number TFS-K51802003 delivers strong mid-range to top-end power (up to 6,500 rpm) in extreme duty street and naturally aspirated race engines. Kit number TFS-K51802004 is Trick Flow's highest-performing modular cam kit. It is recommended for maximum duty race engines with power adders and boost pressures of 15-plus psi that operate in excess of 6,500 rpm. The kits come complete with new cams and valve springs plus chromoly retainers, valve locks, seals, 12mm bolts and washers, and installation instructions. PCM tuning is recommended for maximum performance.
( 4 )
$1,205.99
—
$1,206.99
COMP Cams XFI RPM cam and lifter kits are designed to provide an excellent increase in your ride's performance. Featuring the newest and quickest lobe profiles, these kits are tuned for use in EFI applications, where the extra airflow signal through a carburetor is not required. COMP Cams XFI RPM kits include matching lifters for the ultimate in performance. These kits are great for use with aftermarket cylinder heads.
( 5 )
$1,254.95
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$1,222.95
—
$1,236.95
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$1,330.95
COMP Cams Thumpr NSR modular 3-valve camshafts for Ford 4.6L/5.4L engines deliver an aggressive "thumping" exhaust idle and generous power gains in the middle and upper rpm range. They will turn your Ford 3-valve engine into a performance machine with a minimum of installation difficulty; they only require the addition of COMP Cams cam phaser limiter kits and computer tuning. These cam phaser limiter kits safely modify the factory variable cam timing (VCT) system, allowing for the use of aggressive camshaft lobe technology without sacrificing the benefits of the VCT. Choose between three unique cam designs—Thumpr, Mutha' Thumpr, and Big Mutha' Thumpr. Each delivers excellent horsepower gains and broad torque curves for your musclecar.
( 3 )
$1,028.95
Ford 4.6L/5.4L modular 3-valve engines found in 2005 and newer Mustangs are all the rage. So the question on everyone's mind becomes, "How can I further improve the performance of these powerful engines?" COMP Cams XFI VSR Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower. The performance secret behind these camshafts is in the extensive dyno testing that allowed them to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
Not Yet Reviewed
$1,028.95
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$1,222.95
On Sale
COMP Cams Magnum retrofit cam and lifter kits are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, a show car with power accessories, a super gas, or super competition car on alcohol, COMP Cams kits will fit your engine's needs.
( 10 )
$1,276.95
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 336 )
$1,067.95
COMP Cams Stage 2 LST camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST camshaft packages include: * COMP Cams LST Camshaft * Pushrods * Valve Springs * Retainers * Valve Locks * Spring Seats * Valve Seats
Not Yet Reviewed
$1,535.95
COMP Cams HRT Max Power camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power CK-kits include: * HRT Cam * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
Not Yet Reviewed
$1,222.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
