Availability
Install one of these Canton Racing Accusump cable actuator kits to manually pull open or push open your engine accumulator. They include an offset brass handle valve with a brass pipe nipple, an actuator cable, and an aluminum mounting bracket that can be installed directly over the Canton Racing Accusump.
( 2 )
$148.00
Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.
Not Yet Reviewed
$172.88
—
$185.86
Moeller Marine Snap-Tite drain plugs deliver a dependable water-tight seal. These bailer plugs are available in aluminum, brass, or stainless steel models to fit 1 in. or 1 1/4 in. drain holes, and are offered individually or in sets. They provide a simple, slide-and-snap installation, are corrosion-resistant, and feature durable neoprene seals. A Moeller Marine Snap-Tite drain plug is easy to use—just snap it!
Not Yet Reviewed
$129.99
—
$297.99
Moeller Marine twist turn drain plugs are made of corrosion-resistant brass and rubber. To tighten, simply push-in and rotate clockwise with the "T" handle. They're available individually or in packs of 24.
Not Yet Reviewed
$105.99
Moeller Marine snap down drain plugs offer a secure fit and a tight seal. Available in two popular sizes, the plugs feature corrosion-resistant brass and rubber construction. They simply snap into the drain tube, creating a leak-free seal.
Not Yet Reviewed
$105.99
Allstar Performance immersion heaters preheat your oil for "hot" performance! Cold oil is not good. With Allstar immersion heaters, your overall warm-up time is reduced to get you to the line quicker. Improved lubrication during initial startup also means less stress on your engine and components. The stainless steel sleeve inserts into the pan or tank and secures with a welded brass screw-in fitting. Warm your oil for better performance with help from Allstar immersion heaters.
( 2 )
$129.99
—
$137.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
Manley timing chain sets are designed to provide consistent, accurate timing for your high performance engine. They feature a fully machined billet-steel camshaft and crankshaft sprockets, a full double-roller chain using .250 in. diameter rollers, and adjustable keyway crankshaft sprockets that are machined for and include either a brass wear shim or Torrington thrust bearing. Keep timing stable and accurate throughout the entire rpm range with these Manley timing chain sets.
( 10 )
$121.06
—
$244.93
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$117.02
—
$219.37
For your engine swap, use Advance Adapters oil filter relocation kits, which allow you to locate your oil filter where you want it for more convenient oil changes and increased clearance. These complete kits include everything you need for an easy installation: a spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded and Ford-type spin-on oil filters (not included).
( 14 )
$104.72
These Pioneer performance freeze plugs are designed by engine rebuilders, for engine rebuilders. Several types of freeze plugs are offered in a choice of materials and sizes for a large variety of applications.
( 42 )
$204.99
—
$259.99
Use these high-quality Trans-Dapt Performance oil filter relocation hose kits to customize your oil filtration system. They allow you to install an external oil cooler or oil filter relocation kit for more convenient oil changes.
( 6 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
