Availability
Showing In Stock Items. Show All 48 Items.
Canton Racing Accusump electric valve kits provide a convenient way of operating the Accusump. They also prove useful when mounting the Accusump in hard-to-access locations. When wired directly into the ignition switch, the Accusump can be operated automatically to provide pre-oiling. These kits are recommended for use in street and pre-oiling applications only. They include the electric valve, which has 1/2 in. NPT female threads, a 1/2 in. NPT pipe nipple, a toggle switch, wire, terminals, and installation instructions.
( 2 )
$228.00
CVR oil accumulators keep an extra reserve of oil to help prevent engine damage from pressure loss. These accumulators use compressed air to force their oil reserve into your engine when the oil pressure drops below normal. They're plumbed directly into the pressurized side of your oiling system. CVR oil accumulators can be used as manually operated prelubing devices during start-up. Designed with threaded billet end caps for higher pressure, they have a 3-quart reserve tank and include mounting hardware.
( 3 )
$282.99
Canton Racing Accusumps are oil reservoirs that connect to the engine's oiling system. They are designed to collect pressurized oil from your engine and store it so that it may be discharged when oil pressure is low. Canton Racing Accusump oil accumulators deliver oil before starting to eliminate dry start scuffing (pre-oiling). They also discharge oil during low oil pressure surges to protect against engine damage during demanding racing conditions.
( 22 )
$269.00
Install one of these Canton Racing Accusump cable actuator kits to manually pull open or push open your engine accumulator. They include an offset brass handle valve with a brass pipe nipple, an actuator cable, and an aluminum mounting bracket that can be installed directly over the Canton Racing Accusump.
( 2 )
$139.00
Accusump mounting clamps by Canton Racing are required for all Accusumps. When used on each end of an Accusump, they provide proper support at the end caps to ensure that the tube does not become distorted. They're available in billet aluminum or stainless steel to provide support and an attractive presentation.
( 10 )
$139.00
Canton Racing Accusump universal installation kits provide you with the parts needed to plumb an Accusump when external oil lines are present. The kits include a 6 ft. length of -10 AN braided stainless steel hose, two hose ends, one 1/2 in. NPT to -10 AN adapter to connect the Accusump line, and a T-fitting which has two -10 AN threads--one for the oil flow line and one for the Accusump.
( 1 )
$106.00
Canton Racing Accusump oil filter installation kits provide you with everything that you need to plumb your Accusump. These kits feature an easy-to-install input sandwich adapter that mounts between the block and the spin-on filter to access your engine's oil flow. Accusump oil filter installation kits include two 1/2 in. NPT to -10 AN adapter fittings, two -10 AN hose ends, 6 ft. of -10 AN braided stainless steel hose, and the specific billet aluminum input sandwich adapter to fit your application.
( 2 )
$196.00
—
$232.00
Moroso sandwich oil filter adapters are designed to eliminate the need for a remote filter will still allowing a remote oil cooler or accumulator. The adapter mounts to the spin-on oil filter pocket on the engine and has an oil filter pocket built into the bottom. The ports allow oil to run to a remote cooler or an accumulator without the need of relocating the oil filter. Best of all, the Moroso sandwich oil filter adapters can be clocked so the fittings are where they need to be for maximum clearance.
( 17 )
$110.99
—
$135.99
Radium Engineering catch can kits are application-specific and feature large 10 AN ORB ports, a 4 AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Offered in single and dual catch can versions, the cans are crafted from 6061 billet aluminum, O-ring sealed, and include a stainless steel filter media that is cleanable and reusable and an anodized aluminum mounting bracket. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from high performance driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Order the appropriate Radium catch can kit for your vehicle today from Summit Racing®. Additional benefits: * Less oil consumption effectively raises octane * Cleaner air increases engine performance * Prevents sludge buildup in the intake * Lowers hydrocarbon emissions
( 1 )
$161.45
—
$256.45
An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Radium Engineering universal catch cans, unlike many on the market, feature an integrated oil separator that accelerates oil condensation and a stainless steel filter media that is cleanable and reusable. Offered in single and dual catch can versions, both are crafted from 6061 billet aluminum and O-ring sealed. A universal, laser-cut, anodized aluminum mounting bracket is included. Additional benefits and features: * Effectively raises the octane and increases engine performance from cleaner inlet air * Prevents oil buildup in the intake, intercooler, throttle body, etc. * Excessive oil collection can be an indicator of a damaged engine * Lowers hydrocarbon emissions * Main ports: 7/8 in.-14 female threads (10AN ORB) * O-ring sealed -4AN drain plug * Stainless steel mounting hardware * Safe for pressurized applications * Anodized aluminum oil dipstick
Not Yet Reviewed
$237.45
JE Pistons offers 350 small block 23 degree dome top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
CP Pistons Honda K-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures, along with state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$216.63
—
$246.29
Want easier access to your cartridge oil filter? Baxter Performance remote oil filter adapters provide the ability to relocate the oil filter using aftermarket oil filter mounts and the use of other oil system components, such as oil coolers and accumulators. The adapters are machined from aluminum and anodized for added durability and lasting good looks. AN-10 fittings are included as are Viton® seals for leak-free performance. Have the ability to relocate and convert to a spin-on style oil filter or the ability to use remote oil filters and oil coolers otherwise not available for your engine via Baxter oil filter cartridge-to-remote adapters.
Not Yet Reviewed
$267.26
JE Pistons Big Block Chevy Blown Alcohol Series pistons are perfect for high-boost blown alcohol drag racing! These forged aluminum pistons feature precision CNC-machined ring grooves, valve reliefs for oversized valves, and compatibility with angle milled heads. They include pins, double Spiro locks, double pin oilers, and accumulator grooves. The pistons may be used with buttons (sold separately) if you prefer, in place of Spiro locks. Choose the right pistons to handle your blown setup--JE Pistons Big Block Chevy Blown Alcohol Series pistons.
Not Yet Reviewed
$199.99
—
$224.99
JE Pistons' FSR hollow dome GP pistons, available in a 350 or 400 Series, are the forged side relief versions of their popular 23-degree domed pistons, and they are ideal for circle track and drag racing. Up to 70 grams lighter than traditional "full round" pistons (including wrist pins and rings), these hollow dome gas-ported pistons are also stronger and more durable due to modern FEA-designed forging. They feature accumulator grooves, contact reduction grooves, double pin oilers, lateral gas ports, and deeper valve pockets to accommodate higher lift cams and milled cylinder heads. JE Pistons 23-degree 350 and 400 Series FSR hollow dome GP pistons will accept a low-friction .043/.043/3.0mm ring package (not included).
Not Yet Reviewed
$199.99
JE Pistons offers 400 small block 23-degree dome top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These single replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
Howards Cams ProMax 2618 race pistons are low-silicon and stronger pistons that you need for racing! Forged from 2618 billet bar stock and then heat-treated and aged to a T61 condition, ProMax race pistons have less than one percent silicon content to stand up to the most extreme racing stress. Plus, Howard Cams' X-beam forging design produces a stronger piston than most standard pistons for the ultimate in performance. These 2618 race pistons also have the ability to keep their shape under extreme pressure and high rpm with no skirt shrinking! CNC-turned skirts, oversized valve pockets with radius valve reliefs, forced pin oilers, accumulator grooves, double Spirolox, and lock removal indents are standard features. Lightweight, heat-treated, aircraft-quality wrist pins are also included. Pump up the power of your race engine with the serious strength of American-made ProMax 2618 race pistons from Howards Cams.
Not Yet Reviewed
$144.99
—
$190.99
JE Ultra Series pistons combine all of the best, most desirable piston features, such as thermal barrier crown coating, lateral gas ports, thick-wall wrist pins, and a revolutionary new forging technology for the ultimate in strength. They are ready for massive power and boost right out of the box. Features of the JE Ultra Series pistons: * Grain flow optimized 2618 forging * Lateral gas ports improve ring seal * Ceramic crown coating—thermal barrier blocks combustion heat for durability and better exhaust scavenging characteristics * Perfect Skirt Coating—protects skirts, reduces friction, and eliminates cold-start piston slap and false knock on computer-controlled engines * Accumulator grooves reduce ring flutter at high rpm * Double broach pin oiling * Upgraded 9310 pins and locks—thicker, premium material wrist pins boosts strength * Carbon steel nitride rings
( 2 )
$174.99
—
$249.99
JE Pistons offers 350 small block 23 degree flat top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
CP Pistons Bullet Series piston and ring kits are value-packed replacements. Offered at an affordable price, these high-quality pistons incorporate everything that has made CP an industry leader—extensive research, computer-designed forgings, tight tolerances, and rigorous quality control. Having Bullet Series pistons means you no longer have to compromise high performance, even on a tight budget. They're manufactured from 2618 forged aluminum alloy for strength and durability. Additional features include: * Piston balance 1 gram * Dual forced pin oilers * Contact reduction grooves * Accumulator groove * Contemporary high performance ring sets * Forged side relief * Chromoly wrist pins with wire locks
( 5 )
$144.44
—
$172.79
CP Pistons Honda H-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures. Their state-of-the-art equipment produces superior pistons that will not compromise your expectations. The climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$246.29
CP Pistons Honda D-Series piston and ring kits are as good as they come. CP Pistons was founded to service the needs of those with the desire to build engines of the highest quality and technology. They use proprietary tooling, dedicated cutters, unique fixtures, and state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal
Not Yet Reviewed
$216.63
CP Pistons Nissan piston and ring kits are as good as they come. CP Pistons was founded to service the needs of those with the desire to build engines of the highest quality and technology. With the use of proprietary tooling, unique fixtures, dedicated cutters, and their state-of-the-art equipment they produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$216.63
—
$246.29
CP-Carrillo Pistons offers piston and ring kits for a variety of European and vintage cars, including many Volkswagen and Audi models from the 1990s and up. Most of the pistons are forged aluminum for additional strength, durability, and weight reduction—engineered for maximum power. Dish-style pistons are available with one or two relief valves. Order the size options recommended for your engine application. Standard features: * Deep valve reliefs to accommodate high lift camshafts * Large valve reliefs for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High performance rings * Fully CNC-machined and balanced to +/- 1 gram * Wrist pins included * Double pin oilers force-fed from oil ring groove * Pin lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$246.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
