Availability
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$13.99
—
$20.99
Summit Bucks
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 277 )
$10.99
—
$21.99
Summit Bucks
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$17.99
Summit Bucks
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$10.99
—
$20.99
Summit Bucks
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$20.99
Summit Bucks
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 171 )
$11.99
—
$22.99
Summit Bucks
Mahle Original oil filters reliably prevent contaminants from entering the lubrication system and maintain oil quality, as well as the performance and efficiency of your engine. They are available in several shapes and styles to meet all your needs. Order the filter designed for fitment on your vehicle.
( 8 )
$10.99
—
$14.99
Summit Bucks
These Mishimoto magnetic oil pan drain plugs are manufactured with neodymium magnets, which hold on to all of the metal debris that your oil filter misses, preventing it from going places where it shouldn't. They feature an aluminum head with the Mishimoto logo and have a black anodized finish for protection.
( 12 )
$19.95
Summit Bucks
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
Not Yet Reviewed
$13.99
—
$22.99
Summit Bucks
Clevite M-Series rod bearings are special-purpose items. They have a nominal 0.006 in. thick babbit layer on hardened-steel backings--and are intended for engines that have severe crankshaft deflections. These rod bearings have enlarged chamfers, as well as dowel holes in the lower halves to accommodate the dowels used on aluminum rods. For some applications, both the oil holes and the oil grooves are enlarged.
Not Yet Reviewed
$16.99
Summit Bucks
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$10.99
—
$22.99
Summit Bucks
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 248 )
$16.99
—
$21.99
Summit Bucks
Mahle Original oil pump screen assemblies are an integral part of your engine's oiling system. They're manufactured to meet or exceed OEM standards to fit your vehicle without issue. The assemblies are available with a variety of tube diameters and pickup installation methods—such as bolt-in, press-fit, and screw-in. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$13.99
—
$22.99
Summit Bucks
Your D.I.D Racing Chain cam chains are ready to be tested by you! You'll be able to run your ride without fear because D.I.D's engineers are continuously improving their chain designs in order to handle the tremendous horsepower loads of today's high performance engines. When you want to replace your cam chain, replace it with a proven winner. Install D.I.D Racing Chain cam chains on your ride and get aggressive without fear!
( 1 )
$15.26
—
$20.36
Summit Bucks
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 31 )
$14.99
—
$20.99
Summit Bucks
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 6 )
$13.99
—
$16.99
Summit Bucks
Clevite thrust washer bearings are available for a variety of engine configurations and engines to suit your vehicle's needs. They are manufactured from quality materials and install in the factory location with no modifications.
( 1 )
$12.99
—
$21.99
Summit Bucks
Filter servicing should be a priority in any vehicle. If you're utilizing a Mishimoto -AN in-line pre-filter unit on your vehicle, be sure to inspect and service the filter regularly. Cleaning the filter is an effective option; however, many users prefer to start fresh with a new sintered bronze filter, especially after high-stress driving, such as a track day or an autocross event. Mishimoto inline pre-filter service packs include the components needed to replace your internal sintered bronze filter and re-seal the filtration unit with new O-rings. Keeping on top of filter service; ensure your fluid system is clear of contaminants and operating efficiently with Mishimoto pre-filter kits. Kit includes: * 150-micron sintered bronze filter * Inlet/outlet fitting O-rings * Filter O-ring * Mishimoto Lifetime Warranty
Not Yet Reviewed
$16.95
Summit Bucks
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$19.99
—
$20.99
Summit Bucks
Clevite G-Series rod bearings feature tri metal construction with a soft lead-alloy outer layer, a copper-lead center, and a rugged steel backing. They are designed to withstand the friction, dirt, misalignment, wear, corrosion, and heat that chew away at bearing and journal life. You can depend on Clevite for the quality rod bearings that your engine needs.
Not Yet Reviewed
$15.99
Summit Bucks
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 10 )
$19.99
—
$20.99
Summit Bucks
Mahle Original offers a variety of high-quality valve lifters for fitment on vehicle and engine applications spanning several decades. These direct replacements will restore factory-type performance in opening cylinder valves.
Not Yet Reviewed
$18.99
—
$20.99
Summit Bucks
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 9 )
$16.99
—
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
