Availability
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 418 )
$276.99
—
$1,147.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$26.94
—
$29.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$832.99
Moroso extra long bellhousing dowel pins provide an easy method of properly aligning the transmission input shaft to the crankshaft pilot bearing. They are extra long to simplify the task of placing the bellhousing on the engine block. Proper alignment provides a clean clutch release, maximum pilot bearing and transmission life, and reduces shifter problems.
( 74 )
$20.99
—
$29.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$19.99
Moroso circle track oil pans pans are manufactured in wet and dry sump configurations and include various levels of horsepower gain, ranging from Hobby Stock to NASCAR Winston Cup. They are available in a selection of quality materials and are a great economical choice for your performance engine.
( 5 )
$242.99
—
$246.99
Moroso oil pan stud kits make pan installation easy and prolong gasket life. Locking nuts feature attached washers with serrated faces to provide a positive grip on the pan rail. The studs are made of heat-treated Grade 8 steel with black oxide finish, and cadmium and zinc plated nuts. These are also available in a bullet nose version which are rounded on one end for easier starting of oil pan mounting nuts.
( 19 )
$35.99
—
$38.99
When good looks are important, Moroso chrome oil filters are the way to go. Outside is a triple process, chrome plated steel housing that's hand-polished and then rack-nickled before chroming to ensure the highest luster possible. Inside is a heat-cured, resin-impregnated element that exceeds OEM specifications for filtration efficiency.
( 23 )
$35.99
These Moroso extra long valve cover wing nuts are available in chrome plated steel or your choice of powdercoated or anodized aluminum colors. They include matching studs to eliminate gaskets alignment problems and to speed installation.
( 18 )
$38.99
—
$56.99
These stamped steel valve covers from Moroso are available in your choice of short or tall designs with a variety of breather locations. They are designed to fit everything from stock to Circle Track-oriented configurations. They're manufactured from high-quality steel with either a durable zinc plated finish or a 3-step chroming process, which guarantees the highest and longest-lasting shine possible. Most applications include two breather/filler cap grommets and one PCV grommet. Circle Track and other racing versions feature welded-on breather tubes in a variety of locations, with most including breathers.
( 40 )
$108.99
Moroso oil pump block-off plates are designed to seal the oil passage on the rear main cap when converting over to a dry sump system. They are made of aluminum and are blue anodized for durability. No drilling or modification is required for installation.
( 3 )
$27.99
Moroso offers a variety of wet sump baffled oil pans for road racing, drag racing, street and strip, and Circle Track applications. They're available for a variety of year/make and engine applications. Control your vital lubricant in extreme driving situations with a replacement or upgrade Moroso wet sump baffled oil pan.
( 23 )
$601.99
—
$780.29
Moroso hold-down tabs spread the fastener load over a larger area of the valve cover flange to eliminate flange distortion and subsequent oil leakage. These tabs are available in several different finishes for a variety of applications.
( 24 )
$34.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 130 )
$66.99
—
$69.99
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 40 )
$483.99
—
$583.35
These Moroso alternator pulleys are designed to reduce alternator speeds for high-rpm applications. They're machined from lightweight aluminum to reduce alternator bearing loads and feature a deep groove to help retain V-belts at high rpm.
( 5 )
$56.99
—
$104.99
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 27 )
$549.99
Moroso power steering pump mounting brackets allow you to mount your power steering based on your application needs. These brackets are manufactured from 3/8 in. 6061-T6 aluminum and then blue anodized for a beautiful finish.
( 1 )
$162.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
