Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JEEP COMANCHE Bearings & Bearing Spacers
Showing In Stock Items. Show All 21 Items.
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 121 )
$11.99
—
$47.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 255 )
$88.99
—
$131.99
Speed-Pro Competition Series Main Bearings
If you're building a serious performance engine, then you'll want to consider Speed-Pro Competition Series main bearings. They were developed in NASCAR and Pro Stock competition, so you know they're tough. The bearings are built on premium 1020AK steel backings and overlaid with Speed-Pro's super-duty H-14 alloy. That layer is then covered with a nickel barrier, followed by a thin lead-tin-copper overplate. However, unlike other performance bearings, there is no flash tin layer on top of that. Speed-Pro's engineers have determined that such a layer can actually move around under high loads—sometimes with undesirable consequences. Depending on the application, these main bearings have oil grooves for enhanced lubrication, while maintaining a maximum bearing surface area. They also feature Speed-Pro's exclusive contoured-flange thrust bearing technology for higher thrust-loading capacity. Competition Series main bearings are available in nearly a hundred configurations for countless vehicle and engine applications.
( 63 )
$79.99
—
$111.99
Dura-Bond Standard Cam Bearings
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 101 )
$35.99
Sealed Power Cam Bearings
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$44.99
Crown Automotive Connecting Rod Bearings
Crown Automotive connecting rod bearings will provide reliable value and performance in your engine. Because of the force involved between the piston and crankshaft, bearings are susceptible to wear. These OE-fit replacements are made from quality materials and are available individually or in sets for numerous models. Choose Crown connecting rod bearings to assist you in servicing your engine for lasting efficiency.
( 1 )
$7.50
—
$40.99
Sealed Power Main Bearing Sets
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$91.99
—
$98.99
Crown Automotive Camshaft Bearings
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 2 )
$59.99
King SI-Series Main Bearings
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 89 )
$25.99
—
$47.99
King SI-Series Rod Bearings
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 103 )
$11.99
—
$23.99
Clearance
Crown Automotive Main Bearings
When you need quality crankshaft main bearings, Crown Automotive has direct replacement parts for a wide array of Jeep, Chrysler, Plymouth, and Dodge applications. Your engine bearings do many things—supporting moving parts from being damaged. Improper bearing selection can result in problems ranging from poor oil consumption to engine failure. Ensure that you're getting the proper bearings for your vehicle; choose Crown.
( 1 )
$80.99
$11.99
—
$96.99
Clevite AL-Series Main Bearings
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$47.99
—
$60.99
Crown Automotive Crankshaft Thrust Washers
Crown Automotive crankshaft thrust washers are available for a variety of engines and Mopar applications. Machined from the high-quality steel, these economical direct replacements install in factory locations with no modification. Sold individually or in a set, order the model recommended for your vehicle.
( 1 )
$11.99
Clearance
OMIX-ADA Rod Bearings
OMIX-ADA rod bearings offer aluminum OE features with reliable performance. Their selection is available in various quantities to fill your many applications. Whether you are rebuilding or restoring an early CJ or a newer Grand Cherokee, OMIX-ADA rod bearings will be a perfect fit.
( 1 )
$10.99
—
$11.99
Sealed Power A-Series Rod Bearings
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 35 )
$6.99
Enginetech Rod Bearings
Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$19.99
—
$25.99
Enginetech Main Bearings
Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$38.99
—
$57.99
Enginetech Cam Bearings
Enginetech offers cam bearings for a variety of applications, including many Chevy small block V8 engines from the 1960s, '70s, '80s, and '90s. Enginetech camshaft bearings are manufactured as a "full round" design. They're produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on the application. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high-grade ASTM-14 material. Order the replacement set recommended for your engine.
Not Yet Reviewed
$11.99
OMIX-ADA Main Bearings
Are you doing an engine rebuild? OMIX-ADA main bearings offer the right fit and function to do the job right. They will help reduce the friction between your crankshaft and engine. Get the quality direct-fit main bearings to fit your application from OMIX-ADA.
( 2 )
$99.99
—
$163.99
